30Km long distance COFDM HDMI Wireless Video Transmitter Preguntes freqüents
30Km long distance COFDM HDMI Wireless Video Transmitter Receiver Full Set Audio Video TX RX for UAV Drone 1080P 908T
30-150Transmissor HDMI COFDM de llarga distància Km Sistema de transmissió de vídeo sense fil Receptor Set complet Àudio Vídeo TX RX per UAV Drone UGV 1080P
característica
- altament integrat, disseny combinat modular
- Utilitzant la tecnologia de modulació COFDM, H.264 image coding technology
- Pot transmetre un canal de 1080P HDMI (SDI opcional) senyal
- Retard inferior, the minimum end-to-end delay is 200~250 milliseconds, We also have a super-lower latency model of less than 30-50 mil·lisegons.
- Tots els aspectes de comunicació, no té por de la construcció de murs
- Comunicació d'alta velocitat entre viatges, the maximum moving speed can reach 600 km / hora.
- Transmissor caixa d'alumini tipus dissipador de calor, a prova de cops, Waterproof case is optional.
- Suport LOS i sense línia de visió (NLOS) transmissió mòbil
- La distància no és menor que 30 quilòmetres sota la condició de línia de visió ( Power amplifier and distance: 2 Watts PA 30km, 5 Watts PA 60KM, 10 Watts PA 100km, 20 Watts 150km at LOS)
- Recepció síncrona de senyals d'àudio i vídeo, opcional multiformat HDMI1080P d'alta definició, qualitat d'imatge de DVD de sortida de definició estàndard
- El receptor pot realitzar funcions de gravació i còpia de seguretat de vídeo
- 128-xifrat i desxifrat AES de bits
- Personalització completa disponible
- Upgrade tool: Parameter Configure board
- ús: UAV, Vehicles & UGV
- modulació: COFDM
- voltatge de funcionament: DC11V-DC13V
- corrent de treball: 0.5~ 2W (depenent de diferents PA)
- La potència de transmissió: 0.5W~20W optional
Taula de continguts
sol·licitud
Aquest producte s’utilitza principalment en el reconeixement tècnic i la recopilació d’evidències dels departaments d’inspecció de seguretat pública, transmissió d'imatges en temps real de vehicles aeris no tripulats, vaixells no tripulats, retransmissió de ràdio i televisió, emissions de ràdio i televisió en directe: camp de difusió, retransmissió esportiva, notícies socials, aire en viu, estudi, Expedició alpinística, i altres aspectes. És adequat per a transmissions mòbils en temps real d’imatges d’alta qualitat en diversos entorns complexos, com ara zones urbanes, mars, i muntanyes.
Especificació del transmissor
mètode de modulació | COFDM |
tensió de treball | DC11V ~ DC13V |
corrent de treball | 0.5 Watts: ≤0,6A DC12V, 1 Watts: ≤0,8A DC12V, 2 Watts: ≤1.5A DC12V 5 Watts: ≤3.0A DC12V 10 Watts: ≤5.0A DC12V 20 Watts: ≤7.0A DC12V |
interfície de control | interfície RS232 estàndard, 8 Bits de dades, 1 Ssuperior Bit, Bit de paritat, Velocitat de transmissió: 19200 |
interfície de dades transparent, | una transmissió de port sèrie transparent transparent unidireccional, 8 Bits de dades, 1 Stop Bit, dóna suport a Odd Parity, Bit de paritat, Paritat sense fils, Velocitat de transmissió: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 |
mètodes de xifratge | Admet xifratge de 128 bits |
mapatge de modulació | QPSK (4QAM), 16QAM, 64QAM |
correcció d'errors | 1/2 2/3 3/4 5/6 7/ 8 |
interval de guarda | 1/32 1/16 1/8 1/4 |
Número de transportista | 2K |
ample de banda de freqüència | 2 / 3 / 4 / 5 / 6 / 7 / 8M ajustable |
flux de codi de transmissió | 2000kbs ~ 20000kbs Ajustable |
Potència de transmissió | 0.5 / 1 / 2 / 5 / 10 Watts |
freqüència de transmissió | Any Frequency Customizable, Pas 1 MHz |
una planitud de poder | dins de 10 MHz sense banda de 0,2 dB |
proporció d’espatlla | la potència de sortida de 27 dB, la proporció d'espatlla és millor que -30dB |
el segon harmònic | ≤-45dB |
MÉS | 32Db |
vídeo d’entrada | 720×480 60jo(NTSC), 720×576 50jo(PAL), 720 50P, 720 60P, 1080 50jo, 1080 60jo, 1080 24P, 1080 25P, 1080 30P, 1080 50P, diversos modes són adaptatius. |
Interfície HD | HDMI, SDI opcional |
format de codificació de vídeo | H.264 |
estàndard de protecció | xassís tipus radiador totalment d'alumini, anti-corrosió, disseny a prova de cops |
La mida total | 9 x 6.4 x 2.3 cm |
Pes total | ≤0.20KG |
Especificació del receptor
Paràmetres del receptor HD multi-ample de banda muntat en bastidor | |
Rebre rang de freqüències | 170-860MHz VHF&UHF |
ample de banda de freqüència | 2/3/4/5/6/7/8MHz, opcional |
Nivell d'entrada RF | -94dBm ~ -15dBm (8ample de banda M)/-98dBm ~ -15dBm (2ample de banda M) |
impedància d'entrada de RF | 50 ohms |
Connector d'entrada de RF | Cap N |
mode de demodulació | COFDM |
mode de constel·lació | QPSK, 16QAM, 64QAM (opcional) |
correcció d'errors | 1/2, 2/3, 3/4, 5 /6,7/8 (opcional) |
número de transportista | 2k, |
interval de guarda | 1/32, 1/16, 1/8, 1/4 (opcional) |
descodificació de vídeo | MPEG-2MP@ML/H.264 |
relació d'aspecte | 4: 3 16: 9 |
imatge de vídeo és | 720 * 576 @ 8MHz 1080P @ 60P |
mode de sortida d'àudio | estèreo desequilibrat 300 / 200mv |
sortida d'àudio | output2Audio + 2La sortida de vídeo |
tensió de funcionament | AC220V / DC12V <0.5la |
Temperatura de funcionament | – 20℃ ~ + 50 ℃ |
Mida de l’aspecte | 480*260*45 (1U) xassís |
pes de l'equip | 1.5kg (idioma bidireccional 2,5 kg) |
Nota: el connector per defecte és HDMI, si necessiteu el model més barat, un connector per al connector de vídeo groc CVBS 720p HDMI, si us plau Consulteu aquí per un altre model.
descripció:
– Aquest dispositiu adopta la tecnologia COFDM, que integra antena de transmissió, modulació digital, àudio, i funció de vídeo.
– Mida compacta, poca calor, i llarg abast de transmissió
– compatible amb una càmera petita, podria permetre la captura i transmissió d’imatges HD
– el rang de transmissió serà més llarg si adopta una antena d'alt guany
– Abast de transmissió: 5000m (sense cap interrupció)/500M amb obstacles interromputs
Característiques:
– Mida compacta, disseny de modulació
– Adopta la tecnologia de modulació COFDM, Tecnologia de compressió d’imatges MPEG-2
– Comunicació omnidireccional
– la comunicació d'alta velocitat permet la transmissió d'àudio i vídeo en temps real
– Una caixa d'alumini a prova de cops
– Transmissió NLOS
especificacions:
transmissor:
– mida:90x64x23mm
– pes:200g
– antena:22mm
receptor
– mida: 87x70x20mm
– pes:200g
– Alçada de l'antena:42.5cm (es podria doblegar)
Especificació tècnica
– modulació: COFDM
– tensió de treball: DC11V-DC13V
– corrent de treball:0.5W: inferior a 0,6A @ DC12V
– port de control: port RS232 standrad. 8-bits de dades bits, 1-bit stop bit, Velocitat de transmissió:19200, admet la comprovació de paritat estranya
– port de dades de transmissió:8 bits de dades bits,1 bit stop bit, Velocitat de transmissió,1200,2400,4800,9600,19200,38400,57600,115200,230400
– encriptació: suport 128 xifratge
– mapeig de modulació: QPSK (4QAM),16QAM,64QQAM
– correcció d'errors: 1/2,2/3,3/4,5/6,7/8
– Protegiu l'interval: 1/32,1/16,1/8,1/4
– Número de transportista:2K
– ample de banda de freqüència:2/3/4/5/6/7/8M ajustable
– corrent de transport:2000kbs-20000kbs ajustable
– potència de transmissió: 2W
– freqüència de transmissió: es podria personalitzar, el pas és 1Mhz
– planitud de poder: menys de 0,2 db a 10Mhz
– segon harmònic: menys de -45db
– MÉS:32db
– vídeo d’entrada:1Vp-p,75ohm
– Format del programa de vídeo: MPEG-2
– Qualitat del vídeo: 720×576 quan està per sobre dels 4M
– format: Es poden configurar NTSC i PAL
Especificació tècnica del receptor:
– Gamma de freqüències del receptor: 170-860mhz, VHF i UHF
– ample de banda de freqüència: 2/3/4/5/6/7/8 mhz, ajustable
– Nivell d'entrada RF:-94dbm-0dbm a 8M / -98dbm-0dbm a 2M
– impedància d'entrada de RF: 50ohm
– Port d'entrada RF: escola Secundària
– modulació: COFDM
– La forma de les constel·lacions: QPSK,16QAM,64QAM opcional
– correcció d'errors: 1/2,2/3,3/4,5/6,7/8 opcional
– Número de transportista:2K
– Bretxa de protecció:1/32,1/16,1/8,1/4
– Taxa de pantalla:4:3,16:9
– imatge de vídeo:720×576 @ 6Mhz
– Port de sortida d'àudio i vídeo: estàndard 3.5 port
– voltatge de funcionament: DC12V 0.3A
El paquet inclou:
– 1 transmissor x
– 1 x receptor
– 1 conjunt x accessoris
30Km long distance COFDM HDMI Wireless Video Transmitter
Preguntes freqüents
pregunta 1: Necessito almenys un rang de 30 km des de l'aire fins al terra per a l'UAV UGV USV.
resposta 1:El nostre sistema ho admet, hauria d’utilitzar un amplificador de potència de 2W, és millor utilitzar l'antena de transmissor llarga especial i dues antenes receptores més altes.
COFDM-912T VS COFDM-908T
pregunta 2: Fins on puc arribar si faig servir l'emissor i el receptor tant a terra?
resposta: Ús a terra, l'emissor i el receptor han de tenir una certa diferència d'alçada per transmetre llargues distàncies.
La distància més llarga és només 2.5 quilòmetres si l'emissor i el receptor estan tots dos a la mateixa alçada a terra. Si us plau, mireu el nostre vídeo de prova; perquè l'emissor i el receptor estan situats a diferents nivells, un costat és a la muntanya, un altre costat és a la vora del mar, hem utilitzat els dos watts predeterminats per transmetre 27 quilòmetres.
pregunta 3: Admet un entorn de treball de -20 graus?
resposta: si, recolzat
pregunta 4: I want to buy modules and built-in my devices, please tell me the dimension of that modules.
resposta: SD model: 6X7X1.6cm, HD model: 5X7X1.6cm
pregunta 5:Do you have any special case shells for marine use?
resposta: si, Si us plau, comproveu la imatge següent. (For the transmitter with a three-proof shell, impermeable, a prova de cops, anti-salt spray, 防水,防震,防盐雾)
Precaucions per a la personalització de la comanda
- Freqüència: Please tell me what frequency you need as the default center frequency. Please choose from 170-860Mhz.
- longitud de l'antena: Please tell us the length you want for the 1-piece transmitter and 2-piece receiver antenna. (receiver antenna length has 0.8 o 1.8 meters optional)
- Antenna type:
According to your application scenario, the wireless video transmitter be placed on the drone or on the ground, or on the vehicle? Select different transmit antennas for transmitter and receiver antennas.
The transmitter of the UAV uses a short omnidirectional antenna as much as possible. The transmitter antenna installed on the ground or on the vehicle should be as long as possible, and it can be installed higher to avoid other obstacles on the ground. The receiver is generally used on the ground, try to choose a longer receiver antenna. If it is fixed in one place, a directional antenna can also be used. For more antenna types, please refer to https://ivcan.com/price-list-for-wireless-video-transmitter-and-receiver-antenna/.
Preguntes freqüents
Q. What is the video resolution?
la: 1080P HDMI.
Q. Does the transmitter power current is high?
la: Per transmissor, the different PA (amplificador de potència) dins, the current is different. 20W 6-7A, 10W 5A, 5W 3A, 1-2W 1.6A
Per receptor, the current is only 0.3la (300mA)
Q: Like we only need 10km, how much PA is recommended?
la: Considering that your transmitter and receiver are used on the ground, unlike drones, the heights of the transmitter and receiver are very different. It is recommended to use a 10W PA transmitter for 10 quilòmetres. You also need to consider that your receiver is installed on the car, and it keeps moving at high speed at any time. Only a high-power transmitter can ensure the signal stability at the receiver.
Q: What frequency is better? 2.4G or 5.8G?
la: The frequency range of Cofdm is 170~860Mhz.
We also have products that use 2.4G or 5.8G, but the range of these two intervals is the same as the frequency of WiFi, which will cause the transmission to be greatly interfered by WiFi, and the transmission distance will be greatly shortened.
If there are digital TV DVB-T signals locally, try to avoid frequencies in these ranges when selecting frequencies.
Q: Can customers adjust the frequency by themselves? If sometimes the frequency is occupied.
la: The default center frequency is 595Mhz, generally there is +/-15Mhz bandwidth, which is 30Mhz, and the frequency range can be adjusted. (580-610mhz).
Beyond this range, it is necessary to change the antenna and PA customized according to this center frequency.
Q:How does the customer adjust the frequency of the transmitter or receiver? Is there any software to change the frequency?
la:It's very easy, the transmitter can use the assistant board next to the picture, and the receiver's assistant board is on the fuselage, with a screen and buttons.
But it is not recommended for customers to adjust, because sometimes he changed the parameters of the transmitter but did not change the parameters of the receiver, saying that he could not receive the signal.
Q: Can I adjust the power amplifier on the transmitter?
la: The user can reduce the actual output power by increasing the impedance of the high power, but cannot increase the transmitter of the low power PA.
Per exemple, 10W PA can change to 5W PA, but can not change 5W PA to 10W.
- No one can tell you the exact transmission distance. Because the transmission distance depends on the height of your transceiver antenna and the type and thickness of obstacles, whether the transmitted signal can be diffracted, whether there is interference in the current frequency, etc..
- There are trees or a mountain in the middle, and the transmission distance is different.
- It is difficult to tell you an accurate transmission distance, even the walls have thickness, generally 500-1000 metres.
- Please watch our test video, if you think it is suitable, you can buy a sample for testing, if you are not satisfied, you can return it to us.
- Here is a form for COFDM PA and LOS and NLOS transmission distance for your references.
PA | ELS | NLOS |
500mW | >10Km | <300m |
1W | >30Km | <500m |
5W | >60Km | <1500m |
20W | >120km | <3000m |
50W | >200Km | <5000m |
100W | >250Km | <10Km |
Now COFDM-908T supports H.264, not H265.
Max support 1080 50P. We have actually tested that at 1080P60, the frame will be stuck, or the recognition will be incomplete
- Power consumption is equal to current times voltage. Per exemple, for a 10W transmitter, the current is 5.5A, and the voltage is 12V, so its power consumption is 66W.
- If you prepare a 1000W rechargeable battery and use a 10W PA transmitter, it is estimated that you can use 1000W divided by 66W, which is equal to 15 hores.
-
Whether the link between the transmitter and receiver is good or the signal strength can be seen on the small screen at the COFDM receiver.
-
Not on the transmitter. Because COFDM is a one-way transmission, only the receiver can receive the signal strength of the transmission and show them on the screen. If the transmitter needs to see these signals, it is necessary to add a set of data transmission devices to transfer the status signal from the receiver to the transmitter and display them by the signal light.
-
The transmitter and receiver of two-way transmission can have this function, and it is recommended to choose a bidirectional transmission device.
- First of all the frequency is correct.
- In order to achieve the best performance of the transmitter, power amplifier and antenna, they are generally customized according to a central operating frequency point, and they can all work within a working frequency range, generally ±15Mhz. That is to say, when the central operating frequency is 290Mhz, the working range of the transmitter is 275Mhz~305Mhz. So it meets the frequency range of 280~300Mhz required by customers.
- si, the wireless video signal reception is improved by using Yagi and omni-directional antennas.
- si, we can build the transmission of telemetry and video in COFDM-908T.
- Primer, the 10-watt RF linear amplifier and the 20-watt RF linear amplifier use the same cavity, which is machined by a CNC mill.
- CNC milling machines are not only expensive but also take a long time to process. The 20W and 10W cavities are universal, so they can be used with each other. For faster delivery, this character was not changed and used directly.
- This product actually has 20 watts. We used special instruments to test it before shipment. Please see the video below. (The instrument shows 3.04dBm plus the black attenuator 40dBm equals 43.04dBm)
- Test video at youtube: https://www.youtube.com/shorts/jfNoZeb1BIA
- Here are some correspondences between the output power and the dBm parameters displayed by the instrument.
- 20mW is 13dBm
200mW is 23dBm
1 Watts is 30dBm
2 Watts is 33dBm
5 Watts is 37dBm
10 Watts is 40dBm
20 Watts is 43dBm
50 Watts is 47dBm
100 Watts is 50dBm
Normal Four HDMI Video input and One HDMI output box
If it is just a simple splicing of four camera videos into one video, you can add a box with four HDMI inputs and one HDMI output in front of the transmitter. This means that the monitor on the receiver will always display each video on a quarter of the screen.
si, our dual antenna RF input receiver supports diversity. You can use two yagi directional antenna on our cofdm wireless video receiver.
For better signal reception, it is recommended to have one Yagi directional antenna and one omnidirectional antenna installed on the receiver.
It can be used by photographers. Currently supports 1080@60P, 1080entrada/codificació/transmissió de vídeo de dos canals al mateix temps, 1080entrada/codificació/transmissió de vídeo de dos canals al mateix temps
actualment, it does not support 1080i, nor does it support 4K transmission.
Encara tinc una pregunta?
Si us plau, poseu-vos en contacte amb nosaltres per obtenir més informació.
Envieu la vostra pregunta
20km sobre el mar Prova del transmissor i receptor de vídeo sense fil HDMI per a vaixell o des de la costa fins al vaixell
Long-range 20 Watts Power Amplifier Transmitter and Receiver needs a 12V 6A power supply
comentaris
Cap comentari encara.