在 COFDM 發送器和接收器模塊上切換 HDMI 或 CVBS 視頻輸入

A customer asked how to switch the HDMI and CVBS input video when the power is on. About our COFDM Modulator Demodulator module Encoder-Decoder with HDMI and CVBS AV Input board, Now I show you the operation of our product.

第一, please connect the transmitter with two cameras, one is HDMI, and the other is AV as the video input source.

影片中, the HDMI input is connecting to my computer. The computer plays movies with computer HDMI output as the HDMI video source. The AV is connected to this small camera.

The transmitter is connecting to the serial port of my computer, use this Serial Port Utility on your computer.

Now let us submit this command first, Query the current configuration of the transmitter. Get 0, 0 背部, the first parameter is to represent the video. The second parameter is to represent the audio. Both parameter is 0, 0, they mean default configuration. The default configuration now is HDMI first.

So the receiver output monitor displays the HDMI video, Come back and look at the parameter documentation. HTTPS://ivcan.com/encoder-modulator-decoder-demodulator-module-parameter/

0, Let the system detect
1: Force CVBS input
2: Force HDMI input

Now it is HDMI, let us try to switch the CVBS input, Just set 1 as the parameter and modify the first parameter to 1.

Why did the client not switch them successfully? the client seems to have made a mistake. The client may put this “1” parameter in the second parameter. 事實上, the first parameter controls the video. The position of configuring this parameter cannot be wrong. 除此以外, the input switching of the two videos cannot be controlled.

Now let’s try to send a 1. After sending, the monitor displays black to indicate success. Look at that receiver’s video output monitor. 此時, the decoder board starts to switch. The receiver detects that the input to the transmitter has switched. Then it also resets and re-decodes. Now become the AV camera video.

If you want to switch the HDMI screen, you need to change the parameter from 1 至 2. It takes seconds for it to switch. But it doesn’t need to Re-power, Now the switch is successful.

If we switch AV again, It needs to send the transmitter first to respond. Then the receiver detects it and then switches, so it is slower. 因此, it does not need to be powered on again for video switching. It supports dynamic switching. Just switching time needs seconds.

The customer’s problem may be that his parameters are wrong. He should control the first parameter. Instead of controlling the second parameter, Please tell us if you have any questions.