目錄
30W-2115M power amplifier specification
測試項目 | Indicator requirements |
工作頻率 (兆赫) | 2100~2130 |
輸出功率(W¯¯) | 30 |
帶群延遲 (NS) | ≤50 |
獲得(分貝) | 55±1.0 (可以定制) |
輸入電平(dBm的) | -10 |
帶內波動 (分貝) | ≤1.0 (peak-to-peak value) |
Gain change (-20〜+ 70℃) (分貝) | ≤±1.0 |
voltage standing wave ratio | ≤1.35 |
Belt to shoulder ratio (dBc的)±4.2MHz | ≤-30 |
電源要求 | ≤+28 Vdc 30W/4.5A |
工作溫度 | -25〜+ 65℃ |
RF接口 | SMA-50KFD |
Module volume (毫米) | 150×107×23mm |
常問問題
Q: Can you produce a 1 Ghz to 1.5GHz 25-watt power amplifier? (1000Mhz to 1500Mhz)
Our Requirement as below.
L Band Amplifier we have the below requirements.
Frequecy Range- 1 Ghz to 1.5GHz
RF Output – 25w
Modulation – COFDM
Operating Voltage – 28VDC
RF Input – 10 dBm的
Type Class A Linear Amplifier.
Signal type Needed —COFDM
.頻率. Range –1000Mhz to 1500 兆赫
Input signal level—-0dbm to 10dbm
output power—25 watt@ COFDM Modulation
Input DC supply—-28v DC size of the amplifier should be as compact as possible.INPUT/OUTPUT RF connectors SMA Female
一個: 1000Mhz to 1500Mhz is too wide for us. Our power amplifier frequency range max supports 60 兆赫. Other demands are no problem.