pa 功率放大器
目錄
30W-2115M功率放大器規格
| 測試項目 | 指標要求 |
| 工作頻率 (MHz) | 2100~2130 |
| 輸出功率(W) | 30 |
| 帶內組延遲 (Ns) | Φ50 |
| 獲得(DB) | 55±1.0 (可定製) |
| 输入电平(Dbm) | -10 |
| 帶內波動 (DB) | ≤1.0 (峰峰值) |
| 增益變化 (-20~+70°C) (DB) | ≤±1.0 |
| 電壓駐波比 | ≤1.35 |
| 腰帶肩比 (Dbc)±4.2兆赫 | ≤-30 |
| 電源要求 | ≤+28伏直流30W/4.5A |
| 工作溫度 | -25~+65°攝氏度 |
| 射頻接口 | 斯馬-50KFD |
| 糢塊體積 (mm) | 150×107×23毫米 |
常见问题解答
問吓: Can you produce a 1 Ghz to 1.5GHz 25-watt power amplifier? (1000Mhz to 1500Mhz)
Our Requirement as below.
L Band Amplifier we have the below requirements.
Frequecy Range- 1 Ghz to 1.5GHz
RF Output – 25w
Modulation – COFDM
Operating Voltage – 28VDC
RF Input – 10 Dbm
Type Class A Linear Amplifier.
Signal type Needed —COFDM
.頻率. Range –1000Mhz to 1500 MHz
Input signal level—-0dbm to 10dbm
output power—25 watt@ COFDM Modulation
Input DC supply—-28v DC size of the amplifier should be as compact as possible.INPUT/OUTPUT RF connectors SMA Female
一個: 1000Mhz to 1500Mhz is too wide for us. Our power amplifier frequency range max supports 60 MHz. Other demands are no problem.