30Km long distance COFDM HDMI Wireless Video Transmitter คำถามที่พบบ่อย
30Km long distance COFDM HDMI Wireless Video Transmitter Receiver Full Set Audio Video TX RX for UAV Drone 1080P 908T
30-150Km ทางไกล COFDM เครื่องส่งสัญญาณ HDMI ระบบส่งสัญญาณวิดีโอไร้สายตัวรับสัญญาณครบชุด Audio Video TX RX สำหรับ UAV Drone UGV 1080P
ลักษณะ
- อย่างบูรณาการ, การออกแบบรวมโมดูลาร์
- ใช้เทคโนโลยีการมอดูเลต COFDM, H.264 image coding technology
- สามารถส่งช่องสัญญาณ 1080P HDMI . ได้ 1 ช่อง (SDI . ทางเลือก) สัญญาณ
- ความล่าช้าต่ำ, the minimum end-to-end delay is 200~250 milliseconds, We also have a super-lower latency model of less than 30-50 มิลลิวินาที.
- ทุกรอบการสื่อสาร, ไม่กลัวการสร้างกำแพง
- การสื่อสารความเร็วสูงระหว่างการเดินทาง, the maximum moving speed can reach 600 กม. / ชั่วโมง.
- เคสอะลูมิเนียมชนิดระบายความร้อนของเครื่องส่ง, กันกระแทก, Waterproof case is optional.
- รองรับ LOS และ Non-line-of-sight (NLOS) การส่งผ่านมือถือ
- ระยะทางไม่น้อยกว่า 30 กิโลเมตรภายใต้เงื่อนไขของเส้นสายตา ( Power amplifier and distance: 2 Watts PA 30km, 5 Watts PA 60KM, 10 Watts PA 100km, 20 Watts 150km at LOS)
- การรับสัญญาณเสียงและวิดีโอแบบซิงโครนัส, ตัวเลือกหลายรูปแบบ HDMI1080P ความละเอียดสูง, คุณภาพของภาพ DVD เอาต์พุตความละเอียดมาตรฐาน
- เครื่องรับสามารถบันทึกวิดีโอและฟังก์ชั่นสำรองข้อมูลได้
- 128-การเข้ารหัสและถอดรหัส AES บิต
- มีการปรับแต่งเต็มรูปแบบ
- Upgrade tool: พารามิเตอร์ กำหนดค่าบอร์ด
- ใช้: UAV, ยานพาหนะ & UGV
- การปรับ: COFDM
- แรงดันทำงาน: DC11V-DC13V
- ปัจจุบันการทำงาน: 0.5~ 2W (ขึ้นอยู่กับPA .ที่แตกต่างกัน)
- กำลังส่ง: 0.5W~20W optional
สารบัญ
ใบสมัคร
ผลิตภัณฑ์นี้ส่วนใหญ่จะใช้ในการลาดตระเวนทางเทคนิคและการรวบรวมหลักฐานของแผนกตรวจสอบความปลอดภัยสาธารณะและความปลอดภัย, การส่งภาพแบบเรียลไทม์ของยานพาหนะไร้คนขับ, เรือไร้คนขับ, รีเลย์วิทยุและโทรทัศน์, การถ่ายทอดสดทางวิทยุและโทรทัศน์: สนามออกอากาศ, ออกอากาศกีฬา, ข่าวสังคม, ออกอากาศสด, สตูดิโอ, การเดินทางปีนเขา, และด้านอื่น ๆ. เหมาะสำหรับการส่งภาพคุณภาพสูงผ่านมือถือแบบเรียลไทม์ในสภาพแวดล้อมที่ซับซ้อนต่างๆเช่นในเขตเมือง, ทะเล, และภูเขา.
ข้อกำหนดเครื่องส่งสัญญาณ
วิธีการมอดูเลต | COFDM |
แรงดันไฟฟ้าที่ใช้งานได้ | DC11V ~ DC13V |
ทำงานปัจจุบัน | 0.5 วัตต์: ≤0.6A DC12V, 1 วัตต์: ≤0.8A DC12V, 2 วัตต์: ≤1.5A DC12V 5 วัตต์: ≤3.0A DC12V 10 วัตต์: ≤5.0A DC12V 20 วัตต์: ≤7.0A DC12V |
อินเทอร์เฟซการควบคุม | อินเทอร์เฟซ RS232 มาตรฐาน, 8 บิตข้อมูล, 1 สบิตด้านบน, Parity Bit, อัตราบอด: 19200 |
อินเทอร์เฟซข้อมูลที่โปร่งใส, | การส่งผ่านพอร์ตอนุกรมแบบโปร่งใสทางเดียว, 8 บิตข้อมูล, 1 หยุดบิต, สนับสนุน Odd Parity, Parity Bit, ความเท่าเทียมกันของระบบไร้สาย, อัตราบอด: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 |
วิธีการเข้ารหัส | รองรับการเข้ารหัส 128 บิต |
การแมปการมอดูเลต | QPSK (4QAM), 16QAM, 64QAM |
แก้ไขข้อผิดพลาดไปข้างหน้า | 1/2 2/3 3/4 5/6 7/ 8 |
ช่วงเวลายาม | 1/32 1/16 1/8 1/4 |
หมายเลขผู้ให้บริการ | 2K |
แบนด์วิดท์ความถี่ | 2 / 3 / 4 / 5 / 6 / 7 / 8M ปรับได้ |
สตรีมรหัสการส่ง | 2000kbs ~ 20000kbs ปรับได้ |
ส่งกำลัง | 0.5 / 1 / 2 / 5 / 10 วัตต์ |
ความถี่ในการส่ง | ปรับแต่งความถี่ใดก็ได้, ขั้นตอนที่ 1MHz |
ความเรียบของพลังงาน | วงดนตรี within10MHz น้อยกว่า 0.2dB |
อัตราส่วนของไหล่ | กำลังขับ 27dB, อัตราส่วนไหล่ดีกว่า -30dB |
ฮาร์มอนิกที่สอง | ≤-45dB |
เพิ่มเติม | 32Db |
อินพุตวิดีโอ | 720×480 60ผม(NTSC), 720×576 50ผม(เพื่อน), 720 50P, 720 60P, 1080 50ผม, 1080 60ผม, 1080 24P, 1080 25P, 1080 30P, 1080 50P, โหมดต่างๆสามารถปรับได้. |
อินเทอร์เฟซ HD | HDMI, SDI เป็นทางเลือก |
รูปแบบการเข้ารหัสวิดีโอ | H.264 |
มาตรฐานการป้องกัน | แชสซีประเภทหม้อน้ำอะลูมิเนียมทั้งหมด, ป้องกันการกัดกร่อน, การออกแบบที่ป้องกันการกระแทก |
ขนาดโดยรวม | 9 x 6.4 x 2.3 ซม. |
น้ำหนักโดยรวม | ≤0.20KG |
ข้อกำหนดตัวรับ
พารามิเตอร์ตัวรับสัญญาณ HD แบบหลายแบนด์วิดธ์แบบติดตั้งบนชั้นวาง | |
รับช่วงความถี่ | 170-860เมกะเฮิร์ตซ์ VHF&UHF |
แบนด์วิดท์ความถี่ | 2/3/4/5/6/7/8เมกะเฮิรตซ์, ไม่จำเป็น |
ระดับอินพุต RF | -94dBm ~ -15dBm (8แบนด์วิดธ์ M)/-98dBm ~ -15dBm (2แบนด์วิดธ์ M) |
ข้อมูลสมรรถภาพ RF | 50 โอห์ม |
ช่องเสียบ RF | หัว N |
โหมด demodulation | COFDM |
โหมดกลุ่มดาว | QPSK, 16QAM, 64QAM (ไม่จำเป็น) |
แก้ไขข้อผิดพลาดไปข้างหน้า | 1/2, 2/3, 3/4, 5 /6,7/8 (ไม่จำเป็น) |
หมายเลขผู้ให้บริการ | 2k, |
ช่วงเวลายาม | 1/32, 1/16, 1/8, 1/4 (ไม่จำเป็น) |
ถอดรหัสวิดีโอ | MPEG-2MP@ML/H.264 |
อัตราส่วนกว้างยาว | 4: 3 16: 9 |
ภาพวิดีโอคือ | 720 * 576 @ 8MHz 1080P @ 60P |
โหมดเอาต์พุตเสียง | สเตอริโอไม่สมดุล 300 / 200mv |
สัญญาณเสียง | เอาท์พุท 2Audio + 2เอาท์พุทวิดีโอ |
แรงดันไฟฟ้าที่ใช้งาน | AC220V / DC12V <0.5ก |
อุณหภูมิในการทำงาน | – 20℃ ~ + 50 ℃ |
ลักษณะขนาด | 480*260*45 (1ยู) แชสซี |
น้ำหนักอุปกรณ์ | 1.5กิโลกรัม (ภาษาสองทาง 2.5Kg) |
บันทึก: ขั้วต่อเริ่มต้นคือ HDMI, หากคุณต้องการรุ่นที่ถูกกว่า, ขั้วต่อสำหรับขั้วต่อวิดีโอ CVBS Yellow 720p HDMI, กรุณา ตรวจสอบที่นี่ สำหรับรุ่นอื่น.
ลักษณะ:
– อุปกรณ์นี้ใช้เทคโนโลยี COFDM, ซึ่งรวมเสาอากาศส่ง, การมอดูเลตแบบดิจิทัล, เสียง, และฟังก์ชั่นวิดีโอ.
– ขนาดกะทัดรัด, ความร้อนขนาดเล็ก, และช่วงการส่งข้อมูลที่ยาวนาน
– เข้ากันได้กับกล้องขนาดเล็ก, สามารถเปิดใช้งานการจับและส่งภาพ HD
– ช่วงการส่งสัญญาณจะยาวขึ้นหากใช้เสาอากาศรับสัญญาณสูง
– ช่วงการส่งข้อมูล: 5000ม. (โดยไม่มีการขัดจังหวะใด ๆ)/500M ที่มีอุปสรรคขัดขวาง
คุณสมบัติ:
– ขนาดกะทัดรัด, การออกแบบการมอดูเลต
– ใช้เทคโนโลยีการมอดูเลต COFDM, เทคโนโลยีการบีบอัดภาพ MPEG-2 com
– การสื่อสารรอบทิศทาง
– การสื่อสารความเร็วสูงช่วยให้สามารถส่งสัญญาณเสียงและวิดีโอแบบเรียลไทม์
– ตัวเรือนอะลูมิเนียมที่กันกระแทก
– การส่ง NLOS
ข้อมูลจำเพาะ:
เครื่องส่ง:
– ขนาด:90x64x23 มม
– น้ำหนัก:200ก.
– เสาอากาศ:22มิลลิเมตร
ผู้รับ
– ขนาด: 87x70x20 มม
– น้ำหนัก:200ก.
– ความสูงของเสาอากาศ:42.5ซม. (งอได้)
ข้อกำหนดทางเทคนิค
– การปรับ: COFDM
– แรงดันไฟฟ้าที่ใช้งานได้: DC11V-DC13V
– ปัจจุบันการทำงาน:0.5W: น้อยกว่า 0.6A @ DC12V
– พอร์ตควบคุม: พอร์ต RS232 standrad. 8-บิตข้อมูลบิต, 1-บิตหยุดบิต, อัตราการส่งข้อมูล:19200, สนับสนุนการตรวจสอบความเท่าเทียมกันแบบคี่
– พอร์ตข้อมูลการส่ง:8 บิตข้อมูลบิต,1 บิตหยุดบิต, อัตราการส่งข้อมูล,1200,2400,4800,9600,19200,38400,57600,115200,230400
– การเข้ารหัสลับ: สนับสนุน 128 การเข้ารหัส
– การทำแผนที่ Modulation: QPSK (4QAM),16QAM,64QQAM
– แก้ไขข้อผิดพลาดไปข้างหน้า: 1/2,2/3,3/4,5/6,7/8
– ป้องกันช่วงเวลา: 1/32,1/16,1/8,1/4
– หมายเลขผู้ให้บริการ:2K
– แบนด์วิดท์ความถี่:2/3/4/5/6/7/8M ปรับได้
– กระแสการขนส่ง:2000kbs-20000kbs ปรับได้
– กำลังส่ง: 2W
– ความถี่ในการส่ง: สามารถปรับแต่งได้, ขั้นตอนคือ 1Mhz
– ความเรียบของพลังงาน: น้อยกว่า 0.2db within10Mhz
– ฮาร์โมนิสอง: น้อยกว่า -45db
– เพิ่มเติม:32ฐานข้อมูล
– อินพุตวิดีโอ:1VP-P,75โอห์ม
– รูปแบบโปรแกรมวิดีโอ: MPEG-2
– คุณภาพวีดีโอ: 720×576 เมื่อสูงกว่า 4M
– รูป: สามารถตั้งค่า NTSC และ PAL ได้
ข้อกำหนดทางเทคนิคของเครื่องรับ:
– ช่วงความถี่ของเครื่องรับ: 170-860เมกะเฮิรตซ์, VHF และ UHF
– แบนด์วิดท์ความถี่: 2/3/4/5/6/7/8 เมกะเฮิรตซ์, ปรับ
– ระดับอินพุต RF:-94DBM-0dbm ที่ 8M / -98dbm-0dbm ที่ 2M
– ข้อมูลสมรรถภาพ RF: 50โอห์ม
– พอร์ตอินพุต RF: มัธยม
– การมอดูเลต: COFDM
– ทางกลุ่มดาว: QPSK,16QAM,64QAM เป็นทางเลือก
– แก้ไขข้อผิดพลาดไปข้างหน้า: 1/2,2/3,3/4,5/6,7/8 ไม่จำเป็น
– หมายเลขผู้ให้บริการ:2K
– ช่องว่างการป้องกัน:1/32,1/16,1/8,1/4
– อัตราหน้าจอ:4:3,16:9
– ภาพวิดีโอ:720×576 @ 6 เมกะเฮิร์ตซ์
– พอร์ตเอาต์พุตเสียงและวิดีโอ: มาตรฐาน 3.5 ท่าเรือ
– แรงดันทำงาน: DC12V 0.3A
ในรายการรวมด้วย:
– 1 เครื่องส่ง x
– 1 x รับ
– 1 ชุดอุปกรณ์ x
30Km long distance COFDM HDMI Wireless Video Transmitter
คำถามที่พบบ่อย
คำถาม 1: ฉันต้องการระยะอย่างน้อย 30 กม. จากอากาศสู่พื้นดินสำหรับ UAV UGV USV.
ตอบ 1:ระบบของเรารองรับ, ควรใช้เพาเวอร์แอมป์ 2W, ควรใช้เสาอากาศส่งสัญญาณยาวพิเศษและเสาอากาศรับสัญญาณที่สูงกว่า 2 ตัว.
COFDM-912T VS COFDM-908T
คำถาม 2: ฉันจะไปได้ไกลแค่ไหนถ้าฉันใช้ตัวส่งและตัวรับทั้งบนพื้นดิน?
ตอบ: ใช้งานภาคพื้นดิน, ตัวส่งและตัวรับต้องมีความสูงต่างกันเพื่อส่งทางไกล.
ระยะทางที่ยาวที่สุดเท่านั้น 2.5 กิโลเมตร ถ้าตัวส่งและตัวรับอยู่ที่ความสูงเท่ากันบนพื้นดิน. โปรดดูวิดีโอทดสอบของเรา; เพราะตัวส่งและตัวรับอยู่คนละระดับกัน, ด้านหนึ่งอยู่ที่ภูเขา, อีกด้านเป็นชายทะเล, เราใช้ค่าเริ่มต้นสองวัตต์ในการส่งสัญญาณ 27 กิโลเมตร.
คำถาม 3: รองรับสภาพแวดล้อมการทำงานของ .หรือไม่ -20 องศา?
ตอบ: ใช่, ได้รับการสนับสนุน
คำถาม 4: I want to buy modules and built-in my devices, please tell me the dimension of that modules.
ตอบ: SD model: 6X7X1.6cm, HD model: 5X7X1.6cm
คำถาม 5:Do you have any special case shells for marine use?
ตอบ: ใช่, โปรดตรวจสอบภาพด้านล่าง. (For the transmitter with a three-proof shell, กันน้ำ, กันกระแทก, anti-salt spray, 防水,防震,防盐雾)
ข้อควรระวังในการปรับแต่งคำสั่งซื้อ
- ความถี่: Please tell me what frequency you need as the default center frequency. Please choose from 170-860Mhz.
- ความยาวเสาอากาศ: Please tell us the length you want for the 1-piece transmitter and 2-piece receiver antenna. (receiver antenna length has 0.8 หรือ 1.8 meters optional)
- Antenna type:
According to your application scenario, the wireless video transmitter be placed on the drone or on the ground, or on the vehicle? Select different transmit antennas for transmitter and receiver antennas.
The transmitter of the UAV uses a short omnidirectional antenna as much as possible. The transmitter antenna installed on the ground or on the vehicle should be as long as possible, and it can be installed higher to avoid other obstacles on the ground. The receiver is generally used on the ground, try to choose a longer receiver antenna. If it is fixed in one place, a directional antenna can also be used. For more antenna types, please refer to https://ivcan.com/price-list-for-wireless-video-transmitter-and-receiver-antenna/.
คำถามที่พบบ่อย
Q. What is the video resolution?
ก: HDMI 1080p.
Q. Does the transmitter power current is high?
ก: สำหรับ เครื่องส่ง, the different PA (ขยายอำนาจ) ภายใน, the current is different. 20W 6-7A, 10W 5A, 5W 3A, 1-2W 1.6A
สำหรับ ผู้รับ, the current is only 0.3ก (300mA)
Q: Like we only need 10km, how much PA is recommended?
ก: Considering that your transmitter and receiver are used on the ground, unlike drones, the heights of the transmitter and receiver are very different. It is recommended to use a 10W PA transmitter for 10 กิโลเมตร. You also need to consider that your receiver is installed on the car, and it keeps moving at high speed at any time. Only a high-power transmitter can ensure the signal stability at the receiver.
Q: What frequency is better? 2.4G or 5.8G?
ก: The frequency range of Cofdm is 170~860Mhz.
We also have products that use 2.4G or 5.8G, but the range of these two intervals is the same as the frequency of WiFi, which will cause the transmission to be greatly interfered by WiFi, and the transmission distance will be greatly shortened.
If there are digital TV DVB-T signals locally, try to avoid frequencies in these ranges when selecting frequencies.
Q: Can customers adjust the frequency by themselves? If sometimes the frequency is occupied.
ก: The default center frequency is 595Mhz, generally there is +/-15Mhz bandwidth, which is 30Mhz, and the frequency range can be adjusted. (580-610เมกะเฮิรตซ์).
Beyond this range, it is necessary to change the antenna and PA customized according to this center frequency.
Q:How does the customer adjust the frequency of the transmitter or receiver? Is there any software to change the frequency?
ก:It's very easy, the transmitter can use the assistant board next to the picture, and the receiver's assistant board is on the fuselage, with a screen and buttons.
But it is not recommended for customers to adjust, because sometimes he changed the parameters of the transmitter but did not change the parameters of the receiver, saying that he could not receive the signal.
Q: Can I adjust the power amplifier on the transmitter?
ก: The user can reduce the actual output power by increasing the impedance of the high power, but cannot increase the transmitter of the low power PA.
ตัวอย่างเช่น, 10W PA can change to 5W PA, but can not change 5W PA to 10W.
- No one can tell you the exact transmission distance. Because the transmission distance depends on the height of your transceiver antenna and the type and thickness of obstacles, whether the transmitted signal can be diffracted, whether there is interference in the current frequency, ฯลฯ.
- There are trees or a mountain in the middle, and the transmission distance is different.
- It is difficult to tell you an accurate transmission distance, even the walls have thickness, generally 500-1000 เมตร.
- Please watch our test video, if you think it is suitable, you can buy a sample for testing, if you are not satisfied, you can return it to us.
- Here is a form for COFDM PA and LOS and NLOS transmission distance for your references.
ปะ | เดอะ | NLOS |
500mW | >10กม | <300ม. |
1W | >30กม | <500ม. |
5W | >60กม | <1500ม. |
20W | >120กม. | <3000ม. |
50W | >200กม | <5000ม. |
100W | >250กม | <10กม |
Now COFDM-908T supports H.264, not H265.
Max support 1080 50P. We have actually tested that at 1080P60, the frame will be stuck, or the recognition will be incomplete
- Power consumption is equal to current times voltage. ตัวอย่างเช่น, for a 10W transmitter, the current is 5.5A, and the voltage is 12V, so its power consumption is 66W.
- If you prepare a 1000W rechargeable battery and use a 10W PA transmitter, it is estimated that you can use 1000W divided by 66W, which is equal to 15 ชั่วโมง.
-
Whether the link between the transmitter and receiver is good or the signal strength can be seen on the small screen at the COFDM receiver.
-
Not on the transmitter. Because COFDM is a one-way transmission, only the receiver can receive the signal strength of the transmission and show them on the screen. If the transmitter needs to see these signals, it is necessary to add a set of data transmission devices to transfer the status signal from the receiver to the transmitter and display them by the signal light.
-
The transmitter and receiver of two-way transmission can have this function, and it is recommended to choose a bidirectional transmission device.
- First of all the frequency is correct.
- In order to achieve the best performance of the transmitter, power amplifier and antenna, they are generally customized according to a central operating frequency point, and they can all work within a working frequency range, generally ±15Mhz. กล่าวคือ, when the central operating frequency is 290Mhz, the working range of the transmitter is 275Mhz~305Mhz. So it meets the frequency range of 280~300Mhz required by customers.
- ใช่, the wireless video signal reception is improved by using Yagi and omni-directional antennas.
- ใช่, we can build the transmission of telemetry and video in COFDM-908T.
- อันดับแรก, the 10-watt RF linear amplifier and the 20-watt RF linear amplifier use the same cavity, which is machined by a CNC mill.
- CNC milling machines are not only expensive but also take a long time to process. The 20W and 10W cavities are universal, so they can be used with each other. For faster delivery, this character was not changed and used directly.
- This product actually has 20 วัตต์. We used special instruments to test it before shipment. Please see the video below. (The instrument shows 3.04dBm plus the black attenuator 40dBm equals 43.04dBm)
- Test video at youtube: https://www.youtube.com/shorts/jfNoZeb1BIA
- Here are some correspondences between the output power and the dBm parameters displayed by the instrument.
- 20mW is 13dBm
200mW is 23dBm
1 Watts is 30dBm
2 Watts is 33dBm
5 Watts is 37dBm
10 Watts is 40dBm
20 Watts is 43dBm
50 Watts is 47dBm
100 Watts is 50dBm
Normal Four HDMI Video input and One HDMI output box
If it is just a simple splicing of four camera videos into one video, you can add a box with four HDMI inputs and one HDMI output in front of the transmitter. This means that the monitor on the receiver will always display each video on a quarter of the screen.
ใช่, our dual antenna RF input receiver supports diversity. You can use two yagi directional antenna on our cofdm wireless video receiver.
For better signal reception, it is recommended to have one Yagi directional antenna and one omnidirectional antenna installed on the receiver.
It can be used by photographers. Currently supports 1080@60P, 1080อินพุต/เข้ารหัส/ส่งวิดีโอสองช่องพร้อมกัน, 1080อินพุต/เข้ารหัส/ส่งวิดีโอสองช่องพร้อมกัน
ปัจจุบัน, it does not support 1080i, nor does it support 4K transmission.
20กม. เหนือทะเลการทดสอบเครื่องส่งสัญญาณและตัวรับสัญญาณวิดีโอไร้สาย HDMI สำหรับเรือหรือจากฝั่งถึงเรือ
Long-range 20 Watts Power Amplifier Transmitter and Receiver needs a 12V 6A power supply
ความคิดเห็น
ไม่มีความคิดเห็นสำหรับยัง.