Ninataka kisambaza video kisichotumia waya kwa roboti yangu ya ardhini ya AGV

Ninataka kisambaza video kisichotumia waya kwa roboti yangu ya ardhini ya AGV

ninayo 4 Kamera za risasi za IR kutoka kampuni ya Dahua. Kila 2 megapixels. Ninataka kuzibadilisha ziwe mlisho mmoja wa video (4 video ndani 4 pembe za skrini, hufanya 1 video) na kutuma 1 video bila waya kwa mpokeaji, na kuona kwamba 1 video (ambayo ina 4 video milisho ndani 4 pembe) kwenye skrini ya hdmi. Kwa hivyo video ni upitishaji wa unidirectional. I will send audio and digital data to the vehicle and receive audio and digital data from the Automated Guided Vehicles. So bidirectional audio and bidirectional data transmission. 400 MHz 1km NLOS.

Ninahitaji kisambaza video cha roboti ya ardhini kila wakati ili kuweka kwenye video ya Channel One.

swali: The video channel can change through the PC interface software PlatformSetv1.17.14.zip. I have changed the video channel to 1; I can receive video on channel 1. Tried to change the settings on the transmitter and receiver individually and together. On system reboot, the video system channel changed to Four pictures. Settings are not saved on the system. Please provide me with a solution to system reboot for channel 1 tu.

jibu: It can be set at the web management.

Ninatumai kwamba utumaji data wa kisambaza video chako cha roboti ya ardhini UGV na kipokezi hakitatuma tena data ambayo haijatumwa itakaporejea baada ya kukatizwa kwa mawimbi..

When the receiver range breaks if the transmitter is transmitting data. Mpokeaji anapokuja katika anuwai huwasilisha data kwa mpokeaji na data iliyoshikilia hapo awali, na baada ya sekunde chache, kisha inasambaza data mpya. Kuna kifungu chochote kwamba haipaswi kujaribu kusambaza tena data ya zamani ikiwa safu ya mpokeaji itaanza kuvunjika? Kisha inapaswa kutupa data. Je, kuna usanidi wowote wa programu kubadilisha kigezo hiki ili kudhibiti utumaji upya?

Tumejaribu programu ya kiolesura cha Kompyuta PlatformSetv1.17.14.zip. Hakuna usanidi katika mipangilio ya msingi ili kudhibiti utumaji upya. Tunapojaribu kufungua Mipangilio ya Mapema, inauliza jina la mtumiaji na nywila. Haiwezi kufungua mipangilio ya kina. jibu: Jina la mtumiaji: admin, nenosiri: 123456

Tafadhali nipe suluhisho la kupunguza utumaji upya wa data, wakati safu ya mpokeaji inapoanza kuvunjika.

jibu: Please set the receiver to master mode and the transmitter to slave mode.

Je, ni kawaida kwa hali ya joto ya kesi kuwa ya juu sana?

The temperature shown is 65 degrees C, that too When the outside temperature is 9 degrees C. You can imagine what would happen in summer at 45 degrees C.

jibu: The transmitting power of the video transmission equipment of this set of ground robot mini vehicles is 4W, which generates a certain amount of heat. When in use, it requires an air duct (fan) or the use of the robot’s shell to dissipate heat passively. If installed in a sealed environment, it will cause heat accumulation.

Je, unajaribuje muda wa kusubiri wa kisambaza video na kipokezi kisichotumia waya?

1. We usually run the stopwatch on the computer.
2. And then We use the wireless transmission system camera to face the computer stopwatch.
3. After the stopwatch video passes through the wireless transmission system transmitter and receiver, tunaweza kuona muda wa saa unaoonyeshwa kwa sasa kwenye onyesho la HDMI.
4. Kupitia kazi ya risasi inayoendelea ya simu ya rununu, chukua picha za kuchelewa kati ya saa mbili za kusimama.
5. Na toa maadili kati ya saa mbili za kusimama ili kupata data ambayo ni kuchelewa kwa mfumo wa sasa wa upitishaji wa wireless.
6. Katika data iliyopatikana, wastani wa data ya juu zaidi na data ya chini zaidi ili kupata ucheleweshaji wa wastani wa mfumo huu wa upitishaji wa pasiwaya.

I need a cofdm 4 Channel video transmission for the EOD (Explosive Ordnance Disposal) roboti.

I recommend the best model of Vcan1935 is suitable. The full set of Vcan1935 includes one transmitter (support four-video camera, two-way data, sauti ya njia mbili), one receiver (HDMI video receiver, two-way data, sauti ya njia mbili), na 5 antena.

mteja: I need it in the ground station box with the monitor and control software.

iVcan: Vcan1935 is a full set of video and data transmission systems between the EOT robot and the ground control station. (we don’t offer you the robot and ground control station. )

For the ground control station, please check the model of https://ivcan.com/p/robot-remote-control-handheld-wireless-video-transmitter/

The ground control station needs to be customized according to your demand. Kwa mfano, the control platform of our fire fighting robot, in addition to the basic control buttons such as forward and backward, is more customized according to the needs of fire police customers by adjusting the angle of water spraying and controlling the amount of water.

We want to use your radios in our application involving one-way video and two-way data transmission.

Our deployment setup includes rugged laptops equipped with user interfaces and control algorithms tailored to our operational needs.

Software Integration for Radio Configuration: Our first requirement involves the capability to programmatically adjust the radio settings directly from our software. This is all user-configurable options detailed in your user manual, including but not limited to frequency, usimbuaji fiche, and other pertinent settings. . Could you provide detailed documentation or an API that enable this level of integration?  I presume this is either a USB connection.

​At our Vcan1935, there are three ways to check and change the parameter.

1. On the serial software via the serial port
2. With RJ45 connection (type IP address to open web management system or use a serial software tool in Windows PC).
3. We also can offer you the private command set to change the parameter if you need built-in your software. Vcan1935 Communication protocol sample document

Data Transfer Specifications: The potential for data transfer via RS232/485 was mentioned. Does the system support full-duplex operations?

Ndiyo, our video transmission is one-way from the transmitter to the receiver, and data and audio are two-way transmissions between the transmitter and receivers. ​Vcan1935 supports both R​S232/485 serial ports. They are full duplexes.

Compatible Camera Hardware: The types of cameras directly connectable to your device is required. We assume compatibility with IP or USB cameras; hata hivyo, a precise definition of supported models or connection interfaces is needed.

​Support PAL/NTSC/AHD-1080P/AHD-720P ​camera

Video Reception on Laptops: On the receiver side, clarity on how the video feed is interfaced with our laptops is necessary. The documentation does not explicitly detail the method for connecting the received video feed to our systems. Could you specify the available options? Are the feeds accessible via USB, Ethernet, or another interface? 

​Support RTSP protocol or UDP method to obtain video data ​(ethernet RJ45 to PC)

The remote controller that you have developed:  I would like to know what is needed to consider using that device. Is it a windows machine? How would we develop our own application to use that device?

​The remote control is a Linux system, and the API is currently not open (made). The interface and functions need to be customized through consultation.

I need a 1.4 GHz video transceiver with IP-based. I will transmit 4 IP cameras concurrently. Distance will be maxed 200 m LOS, Muundo huu uliundwa kwa ajili ya upitishaji wa video na data bila waya na kiungo cha data kisichotumia waya cha njia mbili. Environmental conditions will be -30, +50. Could you give me info about your product?

Thanks for your inquiry. If you agree the camera is CVBS or AHD, then I will recommend vcan1935. As this model camera does not support IP-based cameras.

If you need a video transceiver with only four IP cameras, then I will recommend TX900 au Vcan1401.

Do you have a user manual for Vcan1935?