Panel konfigurasi parameter Guide Operasi Gancang pikeun pamancar video nirkabel COFDM jeung panarima

When using the COFDM transceiver module (or transmitter and receiver complete set), it may be necessary to modify the configuration parameters of the module. For the convenience of customers, We have developed the LCD panel board for parameter configuration, the details are as follows:

Parameter configuration panel Quick Operation Guide

1 User interface introduction

1.1 OLED screen display:

This configuration panel board is equipped with a 0.96-inch OLED display, which is used to display the parameters of the COFDM transceiver module (center frequency point, rubakpita, jeung sajabana) for users to query and modify.

1.2 Input buttons:

The configuration panel board has 3 function buttons, which are used to switch parameter display or edit and modify parameter values as needed.

2 How to use

2.1 Parameter display:

When it is powered on, the LCD will display “Connect To Target Device”.

When the configuration Panel board and COFDM transceiver module communicate successfully, the monitor will display the acquired parameter value of the transceiver module. The basic parameter page is displayed by default, and then short pressing the “UP” or “DOWN” switch to the advanced parameter page.

3. Transmitter interface

3.1 basic parameter page of the

COFDM TX V xx

3.2 advanced parameter page

COFDM TX V xx

4. Receiver interface

4.1 basic parameter page

4.2 Advanced parameter page

5. Parameter Modification:

The basic parameter page is displayed by default, If users need to view or modify advanced parameters, they can short press the “NANGTUNG” or “TURUN” button to switch to the advanced parameter page.

In the default mode, only the parameters can be previewed. If the user needs to modify the parameters, please long-press the “menu” button to enter the parameter editing mode.

In the edit mode, the edited parameter value will flash and prompt, if the customer needs to switch the parameter, long-press the “UP” or “DOWN” button to switch. If you don’t need to switch parameters, you can short press the “MENU” button to switch the high and low bits of the parameter to be edited, the corresponding edited bit will flash and prompt, and then press “UP” or “DOWN” button to increase or decrease the value of the corresponding bit of the parameter.

After modifying the parameters (allowing to change multiple parameters at once), Long-press the “MENU” button, and the current parameters will all flash ( parameter name and parameter value flash together), then release the “MENU” button to complete the editing and exit the editing mode, The new parameter value will be written into the COFDM transceiver module.

6. Input and switch the most used frequency points

At Default mode, press and hold the “NANGTUNG” and “DOWN“ two buttons for 2-3 detik, then enter the most used frequency point input page (Allow to set 4 most used frequency points):

If you have not entered common frequency points before, then all common frequency points will be displayed as 000000 (representing Not set); if common frequency points have been set before, the value of the corresponding frequency point will be displayed.

In the most used frequency point input page, the edited frequency point parameter will flash and prompt if the customer needs to switch the frequency point, long press the “UP” or “DOWN” button to switch. If you do not need to switch the frequency point, you can short press the “MENU” button to switch the high and low digits of the frequency point parameter that needs to be edited, the edited digit will flash and prompt, and then press “UP” or “DOWN” button to increase or decrease the digit of the parameter (If you want to cancel a frequency point, change the parameter of the frequency point to 000000).

After modifying the frequency parameters (Allowing to modify of multiple parameters at one time), Long-press the “MENU” button, and all current parameters will flash ( parameter name and parameter value flash together), then release the “MENU” button to complete the editing and exit the most used frequency point input page, return to the basic parameter page, and the new frequency point parameter value will be recorded in the configuration panel.

7. Switch the most used frequency point

At default mode, long-press the “NANGTUNG” or “TURUN” button, and it will switch the pre-set entered the most used frequency points. (allowed to switch at up to 4 most used frequency points ), and the current switch will be displayed on the screen To the frequency point (displayed in the center and in large font), and return to the basic parameter page after staying for 5 detik:

Panganyarna 2W Power Amplifier 27 KM jarak jauh panarima pamancar video nirkabel hirup demo gambar transmisi link data di 2022

Dina raraga hadé némbongkeun konsumén urang jarak rojongan sabenerna sarta ngagunakeun efek tina 2W PA 30km jarak jauh transmisi gambar pamancar jeung panarima., kami ngalaksanakeun tés anu saleresna nembe sareng mendakan Puncak Meisha, ti dieu ka sisi laut Nan'ao, Jarak téh 27 kilométer. Ieu [...]

Maca deui

06
Feb

Pamancar video nirkabel jarak jauh énggal sareng panampi pikeun kaméra drone 110km 10W PA data video nirkabel link audio uji nyata

110km test video tina pamancar sareng panarima pidéo nirkabel jarak jauh pikeun kaméra pidéo drone Naha urang badé ngalakukeun tés jarak jauh 110km ieu waktos ieu? Sababaraha klien naroskeun ka kuring jarak anu paling jauh tina pamancar sareng panarima pidéo nirkabel, ayeuna kami nyarankeun modél Power Amplifier 10W ieu, [...]

Maca deui

07
Oct

Panganyarna Wireless Video Data Audio Pamancar jeung Panarima Test Video di 2022

Wireless Video Data Audio pamancar jeung panarima TX900 2 Watts 27km test video ti puncak gunung ka seaside. (Video jero) Pamancar Audio Data Video Nirkabel sareng Panarima, Dua arah, Download-Upload A customer nempo video test nyata kami ngeunaan 2 watt Power Amplifier 27km jarak jauh pamancar video nirkabel sareng panarima. Anjeunna [...]

Maca deui

01
Sep

60-80 km nirkabel pamancar video transmisi panarima bener ngalayang test

Nyaan uji drone ngalayang tina 60-80 km nirkabel pamancar video transmisi panarima Ieu pamancar video jeung panarima pikeun kaméra drone UAV, pangalusna di 2023, sarta ngabogaan loba ulasan wareg. Éta ogé ngadukung taneuh ka taneuh, upami anjeun ngagaduhan proyek anu peryogi pamancar video [...]

Maca deui

24
Oct