COFDM IP wireless data transmitter module
COFDM IP wireless video data transmitter module One-way Ethernet transparent transmission network port Vcan1816
- Common cofdm transmitters are video signal inputs such as HDMI, CVBS, SDI, or AHD. This one is a transparent transmission module that can support IP cameras and support video and data through cofdm.
- Paired with this COFDM network video data transmitter is a COFDM receiving module, which can realize HDMI and CVBS output, and can also output video to a computer, RTSP, or UDP player through an IP network port RJ45.
- The key role is to use UDP broadcast/multicast to send data.
- Moduli i transmetuesit transparent të transmetimit pa tel të portit të rrjetit COFDM me një drejtim + receive the module, Moduli i transmetuesit transparent të transmetimit pa tel të portit të rrjetit COFDM me një drejtim
- Moduli transmetues merr të dhëna përmes portës së rrjetit dhe transmeton të dhënat e marra nga porta e rrjetit në formën e COFDM
- Moduli transmetues merr të dhëna përmes portës së rrjetit dhe transmeton të dhënat e marra nga porta e rrjetit në formën e COFDM, Moduli transmetues merr të dhëna përmes portës së rrjetit dhe transmeton të dhënat e marra nga porta e rrjetit në formën e COFDM
Unidirectional COFDM network port wireless transmission module function:
Tabela e Përmbajtjes
karakteristika
- The host computer data is received through the network port, dhe më pas transmetohen të dhënat e portit të rrjetit.
- dhe më pas transmetohen të dhënat e portit të rrjetit: port të rrjetit, dhe më pas transmetohen të dhënat e portit të rrjetit. dhe më pas transmetohen të dhënat e portit të rrjetit: dhe më pas transmetohen të dhënat e portit të rrjetit
- CFG-UART: dhe më pas transmetohen të dhënat e portit të rrjetit, 4dhe më pas transmetohen të dhënat e portit të rrjetit, can be docked to our parameter configuration panel. dhe më pas transmetohen të dhënat e portit të rrjetit, Bandwidth wireless, dhe më pas transmetohen të dhënat e portit të rrjetit (dhe më pas transmetohen të dhënat e portit të rrjetit, dhe më pas transmetohen të dhënat e portit të rrjetit, mënyra e konstelacionit, dhe më pas transmetohen të dhënat e portit të rrjetit, etj) dhe më pas transmetohen të dhënat e portit të rrjetit.
- dhe më pas transmetohen të dhënat e portit të rrjetit (Tx): dhe më pas transmetohen të dhënat e portit të rrjetit.
- Interface Card TF, upgrade software, dhe mirëmbajtjen.
- ndërfaqe input pushtet (pushtet): 2PIN 2.0mm pitch Phoenix terminal. tensionit të furnizimit me: 7V ~ 24V.
- dhe mirëmbajtjen: dhe mirëmbajtjen, and the data is flashed when the data is transmitted usually.
- Treguesi i energjisë LED: The power input indicator, dhe mirëmbajtjen.
- dhe mirëmbajtjen: 73dhe mirëmbajtjen (dhe mirëmbajtjen), dhe mirëmbajtjen.
- dhe mirëmbajtjen:
- dhe mirëmbajtjen: 1/2, 2/3, 3/4, 5/6, 7/8
- dhe mirëmbajtjen: QPSK / QAM16 / QAM64
- Mënyra IFFT: 2K
- dhe mirëmbajtjen: 1/4, 1/8, 1/16, 1/32
- Gjerësia e brezit pa tel: 1 dhe mirëmbajtjen, 1Hapi KHz
- Fuqia dalëse RF e konfigurueshme: -94Fuqia dalëse RF e konfigurueshme (Fuqia dalëse RF e konfigurueshme, Fuqia dalëse RF e konfigurueshme).
- Fuqia dalëse RF e konfigurueshme: between 200MHz ~ and 2300MHz can be configured arbitrarily
Fuqia dalëse RF e konfigurueshme
Shkalla e transmetimit pa tel (Shkalla ndërfaqe ajrit):
normë(Fuqia dalëse RF e konfigurueshme) Fuqia dalëse RF e konfigurueshme (bandwidth(MHz) * 8.0/7.0) / (1+të miratuara nga qeveria) * 1512/2048*Fuqia dalëse RF e konfigurueshme(Fuqia dalëse RF e konfigurueshme) * Fuqia dalëse RF e konfigurueshme * 188/204.
Fuqia dalëse RF e konfigurueshme, Fuqia dalëse RF e konfigurueshme, Fuqia dalëse RF e konfigurueshme, Fuqia dalëse RF e konfigurueshme:
UART AT Command
ATDR、ATSD、ATSG、ATSM、ATGD、ATSR、ATGR、ATGB is useful
For the UART AT command operation and format, ju lutemi kontrolloni lidhjen e mëposhtme.
Encoder Modulator Decoder Demodulator Module Parameter Configuration Instructions COFDM AT Command
Receiver Module
Suggestions
- This is a one-way unidirectional transmission system. if you need a two-way bidirectional transmission system, ju lutem kontrolloni këtë lidhje. https://ivcan.com/t/two-ways/ or https://ivcan.com/ru/p/mini-cofdm-wireless-ethernet-transmission-module-rj45/
- This is only a data transmission system, if you need video+data transmission, please look details of these modules, https://ivcan.com/p/modulator-demodulator-module-encoder-decoder-hdmi-cvbs/
- If you need a relay (repeater) to support a longer transmission range (distances), please choose stronger PA (përforcues pushtet) brenda, për shembull, change 1Watts PA to 2.5 Watts ose 5 Watts.
–160MHz~860MHz HD video COFDM receiver module with HDMI/AV/Ethernet/USB output
The COFDM receiver module is a compact digital diversity receiver with integrated H.264 decoding, i përshtatshëm për përdorim në aplikime të lëngjeve dhe me lëvizshmëri të lartë. The receiver module accepts signals from two antennas to significantly enhance the demodulated performance and increase the operating range. The receiver module can find and lock automatically to the incoming transmission quickly according to the pre-set frequency and bandwidth. This receiver module features a range of comprehensive signal outputs including HD at 720p and 1080P, video e monitorit HD CVBS e konvertuar poshtë, and two analog audios supported.
The receiver module also includes DVR record functionality with a Micro SD card or USB disk. Për më tepër, the receiver module has a built-in RTSP server that enables video streaming over Ethernet for remote software or hardware decoders. And the receiver module also enables video streaming over USB for remote Android device decoders like smartphones or Android PAD. This allows multiple remote viewers to monitor the same video simultaneously. The receiver module also supports display characters string on the video display screen with the video together in OSD mode.
When paired with the Our COFDM transmitter module, the receiver module offers a comprehensive, Zgjidhje video dhe audio e vendosur shpejt që mundëson ndërgjegjësimin e avancuar të situatës. Mund të luajë një rol thelbësor në dhënien e videove të drejtpërdrejta në kohë reale nga platformat celulare të tokës dhe ajrore.
- COFDM demodulation and H.264 video decoder;
- Rezolucioni i plotë HD, 1080P@60 fps;
- Siguri e madhe nga deshifrimi AES;
- DVR record with Micro SD card or USB disk;
- Built-in RTSP server enables video streaming over Ethernet;
- Enables video streaming over a USB host for the remote device;
- Supports display characters string on the video display screen in OSD mode;
- Stable signal transfer in NLOS and high-speed moving;
- Frekuenca e rregullueshme e punës, and bandwidth.
Specifikim:
IO
HD video output | HDMI type A connector |
Dalje video e përbërë | 6Lidhës PIN PH2.0 mm |
output Audio | Embedded HDMI and CVBS |
input RF | Two SMA female 50Ω |
Transmetues video me valë SDI për transmetuesin e lidhjes zbritëse COFDM me rreze të gjatë kamerash | 2PIN PH2.54mm connector |
Host USB | 4Lidhës PIN PH2.0 mm |
Të dhënat TTL UART | 3Lidhës PIN PH1.25 mm, 3.3V signal |
Transmetues video me valë SDI për transmetuesin e lidhjes zbritëse COFDM me rreze të gjatë kamerash | 4Lidhës PIN PH1.25 mm, 3.3V signal |
Ethernet | 6Lidhës PIN PH2.0 mm |
TF-Card | Vendi i kartës TF |
Keys&LEDs | 2*5Lidhës PIN PH2.0 mm |
Demodulimi
Formatet e Demodulimit | COFDM(DVB-T) |
Transportuesit | 2K |
Bandwidth | I konfigurueshëm nga 1 MHz në 8 MHz, I konfigurueshëm nga 1 MHz në 8 MHz |
FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
interval Guard | 1/32, 1/16, 1/8, 1/4 |
plejadë | QPSK, 16QAM, 64QAM |
Shpejtësia e biteve | 0.5I konfigurueshëm nga 1 MHz në 8 MHz |
RF
brezat e frekuencave | 160MHz ~ 860MHz |
Madhësia e hapit të akordimit | 1KHz |
ndjeshmëri | -97±1dBm(BW=8MHz, QPSK, CR=2/3, GI=1/16) për një kanal dhe shtoni 3dBm për dy kanale |
Video dhe Audio
prodhimi Video | HDMI dhe CVBS, Ethernet(Protokolli RTSP si parazgjedhje, opsioni UDP), USB |
Formatet Video | 1080P ose 720P
720*480 60unë(NTSC), 720*576 50unë(PAL) |
Dekodimi i videos | MPEG-4/H.264 AVC |
output Audio | Audio i integruar HDMI dhe AV |
Dekodimi i audios | AAC |
Deshifrimi | AES256 |
ruajtje | USB disk or micro SD card |
Monitorimi dhe kontrolli
Comprehensive receiver setup with Our Config Panel or Windows PC or other devices via control UART.
Shkallë temperature
Specifikimi i plotë: 0° deri në +70°C Ambient
ruajtje: -40° deri +80°C
Karakteristikat fizike
Board Dimensions: 80.4*50.8mm
Kërkesat për fuqi
Karakteristikat fizike: 9~ 24 VDC
Konsumi i energjisë: <300mA@12V
IO Signals
Keys + LEDs:
The receiver module has a 2*5PIN PH2.0mm connector which provides “keys + LEDs” signals. It is designed for customers who want to expand LEDs and keys to their cases.
PWR led signal: this two-pin can connect to an led for the power indicator, and constant light when the device is normally powered.
The link led signal: this two-pin can connect to an led for a wireless link indicator, which blinks when the video stream is received.
REC led signal: this two-pin can connect to an led for a record indicator, and constant light when video recording.
REC key signal: this two-pin can connect to a button for the switch of video recording, and a short press to change its status. The receiver will automatically check the storage device(micro SD card or USB disk) after powering on and start to record video when the storage device is inserted. Just press it to stop or record again.
OSD key: this two-pin can connect to a button for turning on/off the status of the OSD displaying, long press it to switch(more than 1s). The status will be kept after a reboot. When the OSD status is on without any OSD data input from the data uart, the device will display information on the video screen as:
RF:338.0MHz BW:4.0MHz ; RF, frekuenca e punës; BW, Bandwidth
QPSK CR:2/3 të miratuara nga qeveria:1/16 ; plejadë, FEC, interval Guard
AIR:3.90Mbps ; AIR, wireless transmitting bitrates
VBR:3.05Mbps AES OFF ; VBR, video bitrates; AES OFF, AES encryption turned off.
SIG1:27 SIG2:22 ; SIG1, the signal intensity of antenna 1; SIG2, the signal intensity of antenna 2
ber1:0.14% ber2:100.00% ; ber1, bit error rate of antenna 1; ber2, bit error rate of antenna 2
REC OFF No Storage ; video recording status
Paired with COFDM transmitter:
The default normal features of the two-antenna Wireless receiver module can be paired with all of Our H.264 transmitter modules. The HD video latency from its inputting of the transmitter to the HDMI screen displaying of the receiver is about 200~250ms.
Our two-antenna COFDM Wireless Receiver module can also be paired with our COFDM transmitter module for the lowest video latency application when manufactured with specified firmware. The specified firmware enables proprietary H.264 video compression/decompression only using p-frames for the lowest latency. Vonesa e videos nga futja e transmetuesit në ekranin HDMI të marrësit është rreth 50ms deri në 130ms.
How to test COFDM IP wireless video data transmitter module?
ethernet modem in one way
Pyetjet e shpeshta
Please note that this network transparent transmission device is one-way transmission, it can only realize UDP broadcast function, although there is an RJ45 network port, but because it is not two-way transmission, it cannot realize the ping command, so even if you want to connect an IP camera, you need special customization IP cameras, because ordinary IP cameras need two-way transmission equipment.
How to test this network transparent transmission device, ju lutemi kontrolloni lidhjen e mëposhtme
How to test COFDM IP wireless video data transmitter module
jo, just net transfer via IP ethernet RJ45 input.
- If you want to test the video transfer, maybe you need an encoder board Vcan1746, transfer HDMI / CVBS video to IP stream, then connect the 1816 transmetues.
- pyetje: I already have Vcan1776, which has a Vcan1746 encoder board at the transmitter module, should I get one more encoder board?
- përgjigje: Although the encoder board of Vcan1776 can be reused. It needs to disassemble the Vcan1776 RF module, then connect the network port adapter cable, and change the different firmware. It is not recommended to do this. It is recommended that you purchase another separate encoder board.
- The voltage range of TX RX is 7~24V.
- At 12V power supply, use an adapter with a maximum of 1A or more.
- Prepare a formattedFAT32format Micro SD card
- Unzip the upgrade file from our verify and send to you, Here is "1816_update_image_xx_yy.zip" skedar, and copy it to the root directory of the Micro SD card, pay attention to keep the directory structure unchanged (there is a flash folder in the root directory of the Micro SD card, and there is an app folder in it).
- Insert the Micro SD card into the Vcan1816 module, power on and wait for the red light on the board to flash, indicating that the upgrade is successful.
- shënim:
Under normal circumstances, the update will be completed within 30s after power-on (the red light flashes). If the red light does not flash for a long time after power-on, please check the connection of Micro SD and try power-on again.