COFDM DVB-T H265 SDI Encoder Decoder
We need devices, to receive the information on Full HD camera videos with SDI (Serial Data Interface) on the line and Encode information in H.265 standard. Compressed data must be transmitted in either DVB-T (Digital Video Broadcasting terrestrial) or DVB-S standard. The analog output of the designed module can accept both I and Q signals, as well as modulated signals.
Lisi o Mataupu
Does your SDI Video Encoder support TSI Input / gaosiga?
Our existing encoding board to modulation board transmits data through the network port. Rather than the TSI interface you mentioned. This does not affect the use of the transmitter to the receiver. This is an internal interface of the transmitter.
Do your encoder decoder boards support 525 i50 to 1080 P60 on the video format?
Now our SDI video encoder boards support HD: 720p @ 23.98Hz/24Hz/25Hz/29.97Hz/30Hz/ 50Hz59.94Hz/60Hz and 1080p @ 23.98Hz/24Hz/25Hz/29.97Hz/30Hz/50Hz/59.94Hz/60Hz. It does not support 525 i50 video format, is it ok？
Does your SDI COFDM DVB-T H265 SDI Encoder RF output power support 0~10dBm？
Your output frequency point from 400Mhz to 2800Mhz required is very wide.
It is difficult to achieve 0~10dBm output under such a wide frequency point, and adding a Power Amplifier on the board will increase power consumption and heat (you also mentioned that there is no need for a fan for heat dissipation).
Are you willing to agree to our existing -3 to -10dBm output and then add your own PA (mana mea faʻamalosi)?
What is the dimension of your COFDM DVB-T H265 SDI Encoder?
Do you have a special dimension request? Our existing size is 70x45mm.
Our existing video encoder and decoder boards can meet your project needs.
My engineer’s biggest worry is that your company, as a member of the broadcast and television industry has relatively high requirements for image video quality.
Our video encoding board will perform lossy compression for low latency. Can you take a set of existing samples to test and confirm the image quality? If you think our samples can meet your company’s requirements, we will redesign and draw the board according to your company’s requirements.