Oplossing voor HDMI-videotelemetrie en RC-zender voor een bereik van 15 km

Oplossing voor HDMI-video, Telemetrie, and RC Transmitter for 15Km Range

We understand your requirement for a professional-grade HDMI video, telemetrie, and RC transmitter system capable of operating over long distances, specifically around 15 kilometers. Such a system is critical for UAV, drone, and other remote operations where high-quality video transmission, reliable telemetry data, and robust remote control signals are required simultaneously. Onderstaand, we provide detailed information about the solution we can offer, including capabilities, beperkingen, and technical considerations.

---

1. Solutions for HDMI Video, Telemetrie, and RC Transmission at 15Km

Ja, we offer a complete solution that meets your requirements for transmitting HDMI video, telemetrie, and RC control signals over a 15-kilometer distance. Our system is specifically designed for UAV and drone applications where high-definition video, realtime controle, and telemetry feedback are essential for mission success.

The solution integrates a high-performance wireless video transmitter capable of encoding HDMI video into a robust COFDM or OFDM transmission format. This ensures that even in challenging environments with potential interference, multipath effects, en obstakels, the video signal remains stable and high quality. The transmitter simultaneously supports telemetrie gegevens en RC control channels, combining all essential communication links in a single system. This integration reduces the need for multiple separate transmitters, simplifies installation, and minimizes payload weight on UAV platforms.

Het systeem ondersteunt high-definition HDMI input, enabling direct connection to cameras, UAV gimbals, of andere videobronnen. The transmitted video maintains Full HD quality, with low latency to ensure real-time situational awareness and precise control for UAV operators. The telemetry link allows for real-time status monitoring of UAV parameters such as GPS coordinates, batterijniveau, hoogte, and other sensor data. RC signals are transmitted reliably alongside video and telemetry, maintaining control of the UAV across the full operational range.

---

2. Non-Line-of-Sight (NLOS) Operation Using Relays

Regarding the NLOS situation, our solution supports one relay in mesh mode, allowing a secondary UAV or relay station to extend the effective communication range and bypass obstacles such as buildings, heuvels, or trees. In deze modus, the primary UAV transmits video, telemetrie, and control signals to a relay UAV, which then forwards the signals to the ground control station (GCS).

It is important to note that while one relay is supported, gebruik two or more relays in series may significantly reduce the available data rate due to cumulative signal processing and retransmission delays. daarom, for long-range operations involving NLOS conditions, we recommend planning the deployment with one relay UAV positioned strategically to maintain line-of-sight to both the primary UAV and the GCS. This configuration ensures a robust and stable connection without significantly compromising video quality or telemetry data rate.

---

3. Data Rate Performance

Our system is capable of maintaining a data rate greater than 1.2 Mbps at a distance of 15 kilometers, which meets most high-definition video and telemetry requirements. Eigenlijk, Onder optimale omstandigheden, the system can support tot 4 Mbps, providing sufficient bandwidth for Full HD HDMI video, multiple telemetry channels, en RC-besturingsgegevens tegelijkertijd.

This high data rate ensures that video streams remain smooth, telemetry data is transmitted in real time, and RC commands are received without delay, even at extended ranges. The system employs advanced FEC (Voorwaartse foutcorrectie) and robust modulation schemes such as COFDM or OFDM to maintain signal integrity, minimize packet loss, and resist interference from other RF sources operating in the same frequency band.

---

4. Additional Information on HDMI Video, Telemetrie, and RC Transmission

The HDMI video, telemetrie, and RC transmitter system is designed for Professionele UAV -activiteiten, industriële bewaking, landmeetkunde, Zoeken en redden, and other applications that require long-range, high-quality wireless communication. Key features of the system include:

• HDMI Input Support: Full HD video transmission directly from the camera without compression loss.
• Telemetry Channels: Real-time monitoring of UAV parameters such as GPS, hoogte, batterijstatus, and sensor data.
• RC Control Integration: Reliable control of UAV functions including flight commands, gimbal controle, and other auxiliary functions.
• low Latency: Transmission latency optimized for FPV and real-time control, ensuring responsiveness and safe operation.
• Robust Long-Range Communication: COFDM/OFDM modulation with Forward Error Correction and optional encryption for secure transmission.
• Flexibele implementatie: Supports line-of-sight and limited non-line-of-sight scenarios using a single relay UAV.
• Frequentie -opties: Multiple operating frequency bands available to meet regulatory requirements and reduce interference in crowded RF environments.
• Gebruiksvriendelijke bediening: Plug-and-play setup with clear interface, minimal configuration, and reliable performance under varying environmental conditions.

For more detailed technical specifications, integration options, and system deployment guidance, Neem dan direct contact met ons op. Our engineers can provide tailored recommendations based on your specific UAV platform, operational environment, and mission requirements.

---

samengevat, ons HDMI video, telemetrie, and RC transmitter solution is capable of supporting professional UAV operations at 15 km bereik, with high data rates, integrated video and control channels, and optional relay capability to overcome non-line-of-sight challenges. This system is designed for reliability, ease of use, and high-quality video transmission in demanding aerial applications.