Wireless video transmitters and receivers for live cameramen and directors

There is a demand for wireless video transmitters and receivers for live cameramen and directors.

The below briefing the requirements of the equipment.

  • Ua hauj lwm frequency 595 – 610MHz
  • SDI input in the transmitter
  • SDI output in the receiver
  • Video format to support, FHD 50i, 59.84i and 60i, interlaced video and Embedded audio, dual channel in SDI
  • Transmitter antenna not longer than 300mm
  • Receiver antenna, 1.8minyuam, 4pcs
  • Transmission fais fab tuag, 20W Power Amplifier
  • Kev Nyuaj Siab, H.265 with low latency
  • Please include two LCD panels.
  • 1km~2km transmission range
  • 1080i resolution
  • It is better RF input connector type is BNC, 50ohm, 40-60 meter feeder cable
  • Support right-channel and left-channel stereo audio
  • Yog tias muaj 10 photographers, the director may be switching or using one of the videos. By transmitting the video in the direction, the photographer can see which video the director is using.
  • Or add an indicator light on the transmitter to indicate that the director is currently using that photographer’s video stream.

sau ntawv cia

Koj qhov chaw nyob yuav tsis muab luam tawm. Yuav tsum tau teb yog cim *

Discover more from iVcan.com

Subscribe tam sim no kom nyeem ntawv thiab tau mus saib tau daim ntawv qhia txog archive.

Nyeem ntawv

Xav tau kev pab rau DasApp?
Exit mobile version