COFDM модулятор демодулятор модуль кодлогч декодер HDMI CVBS AV оролт AES 256 FHD RF дамжуулалт
Агуулга
Another side view
COFDM Encoder module, CVBS / HDMI оролт, IP output
For More details about the COFDM encoder board, please visit here
COFDM Encoder module Advantage:
- Хэт бага хоцрогдолтой H.265/H.264 аудио болон видео кодчилол нь 1080P@60 бодит цагийн видео бичлэг болон кодчилолыг дээд зэргээр дэмждэг.
- HDMI эсвэл AV аудио болон видео оролт, кодчилсны дараа, Ethernet портын гаралт эсвэл утасгүй модулийн гаралт, видео кодчиллын битийн хурдыг динамикаар тохируулах боломжтой
- аудио оролт, аудио тайлан уншиж сурснаар гаралтыг дэмжинэ
- Хоёр видеог дэмжинэ (HDMI + AV) нэгэн зэрэг оролтын кодчилол (сонголт, анхдагч нь HDMI эсвэл AV кодчилол юм, хоёр оролтын эх үүсвэрээс нэгийг нь сонгоно уу). )
- Вэб UI эсвэл цуваа порт UART AT команд for configuration management
COFDM transmitter module
COFDM modulator-demodulator datasheet download
COFDM demodulator Vcan1776RX-H264 datasheet
The last version of the TX RX board
TX: V6.5.6p
RX: 4.1.2х
Түгээмэл асуултууд
- Question1: Could you please tell me part number of this component, we try to find localy and check. Хариулт 1: It is a inductance named LOH32PN2R2NNC.
- Suggest Check Points: If the power supply current of the board is well but there is no RF output, maybe the below component TC1-1-13MX+ is generally damaged.
- In order to avoid damage to this device during transportation (the device itself is relatively high), we ordered red glue protection for this device when we shipped it.
- The engineer also suggests that you check to see if the cable is loose or in poor contact.
- Please try to replace the FPC cable connecting the two boards
- We can provide spare parts if you're sure which one.
Мэдээжийн хэрэг
Доорх линкээр орж үзнэ үү.
Encoder Modulator Decoder Demodulator Module Parameter Configuration Instructions COFDM AT Command
3. Асуулт, If our camera quality is good enough for both 4 MHz and 8 МГц-ийн зурвасын өргөнийг. Энэ тохиолдолд, Should the customer choose 4 MHz буюу 8 MHz?
Хариулт: Our one-way COFDM shipments use 4Mz wireless bandwidth by default, corresponding to a video bit rate of 3.12Mbps, which is enough for 1080p; If changed to 8MHz wireless bandwidth under the same conditions, the video bit rate doubles to 6.24Mbps. All customers can choose between wireless bandwidth 4MHz and 8MHz, even 6MHz can also be considered.
4. Асуулт: Which is better for this tx+rx set from a receive sensitivity view?
Хариулт: For wireless links, it can be simply considered that the receiving sensitivity will be higher at lower wireless bandwidths. From the perspective of receiving sensitivity, 4MHz>6MHz>8MHz
Мэдээжийн хэрэг
Доорх линкээр орж үзнэ үү
Dron UAV утасгүй видео дамжуулагч ба хүлээн авагч Vcan1870-д зориулсан COFDM реле давтагч модуль
Single channel receiving sensitivity:
-97+/-1МУХБ at QPSK 8MHz,
-98+/-1МУХБ at QPSK 6MHZ,
Sensitivity increased by 3dbm when receiving with dual antennas
The receiver default firmware supports RTSP player, some clients prefer UDP player, which we also can offer, then RTSP player doesn't support. (RTSP and UDP can only choose one of the two firmware)
Доорх холбоосоор татаж авна уу.
Splayer_v4.2_2020.6.6
https://drive.google.com/file/d/1ihzUhfnx2Wo3zLO8UAs1aUQeLswonJD-/view?usp=sharing
Splayer_v4.3_2022.10.22
https://drive.google.com/file/d/1PQc-LZ55qGnjeMsjkHYSloHfY3NEUsGH/view?usp=drive_link
Мэдээжийн хэрэг, доорх зургийг шалгана уу.
How to switch HDMI or CVBS video input via the UART AT command?
How to upgrade the COFDM video receiver
How to upgrade the COFDM drone video encoder modulator board
сэтгэгдэл
Одоогоор ямар ч сэтгэгдэл алга байна.