RV1126 AI IPC камерт өөрийн програмыг хэрхэн яаж шатаах вэ
RV1126 AI IPC камерт өөрийн програмыг хэрхэн яаж шатаах вэ
The first burning needs to use DriverAssistant to install the driver.
Агуулга
Enter Maskrom/loader
Шатаах горимд орох гурван арга бий:
1. reboot loader
After entering the system, run the reboot loader, and automatically enter the loader mode after restarting
Uboot：
Асаасны дараа, quickly press Ctrl + C to interrupt the Uboot startup, and then type the download command.
2. Short Circuit
Power off, use tweezers to short the two points in the red circle above, and power on
3. Burning
Open RKDev_Tool, бөгөөд энэ нь харуулах болно “found a Maskrom device” эсвэл “found a Loader device”:
Select “програмыг шинэчлэх”:
Click on “Firmware”:
A file selection dialog window pops up, select update.IMG, it may be stuck for a few seconds to load the firmware.
Then click upgrade:
You can see that the log on the right starts to show the burning process.