60KM TDD Video and data integration users manual

version history

date	Version	Modify the description
20230612	V1.0	initial version

Table of contents

version history 2

1. Product Overview 4

2. Product indicators 4

3. Product size and weight 5

3.1 Dimension Diagram 5

3.2 Dimensions and Weight 5

4. Product interface definition 6

4.1 Interface Diagram 6

4.2 Interface Definition 6

5. The meaning of the product status light 7

1. Product Overview

W1400-33-SMA is a self-developed TDD two-way video data integration medium and long-distance wireless image transmission equipment. product has Real-time interference detection, adaptive frequency selection, adaptive code stream and automatic power control, And other functions, greatly improving the ability of anti-multipath and anti-jamming. ໃນ​ເວ​ລາ​ດຽວ​ກັນ, it also has the characteristics of high reliability, good stability, and low delay. This product uses Dual network ports, three serial ports, and other multi-interface designs. To a greater extent, it meets the diverse and multi-functional needs of customers in the fields of drones, ການປ້ອງກັນໄຟ, ການກວດກາ, ການຕິດຕາມ, and many other application scenarios. The maximum transmission distance in the case of a good air-to-ground line of sight in a good environment 60KM. To meet the needs of customers for medium and long distances.

2. Product indicators

Table 1: W1400-33-SMA technical specification list
ຕົວກໍານົດການລະບົບ	technical indicators
ຮູບແບບອຸປະກອນ	W1400-33-SMA
device name	TDD two-way wireless image data integrated equipment
ຄວາມຖີ່ໃນການໃຊ້ວຽກ	1350~1470MHz
ຊ່ອງ RF	2T&2R
ສົ່ງພະລັງງານ	1.7W/32dBm
ໄລຍະການສົ່ງ	Air-to-ground 60KM (common vision)
channel bandwidth	10MHz
Modulation	QPSK/16QAM
ຄວາມອ່ອນໄຫວຂອງຜູ້ຮັບ	see table 2
ອັດຕາສູງສຸດ	17Mbps@16QAM3/4
transmission delay	One-way 10ms
ການໂຕ້ຕອບ RF	SMA x2
device interface	Network port x2
	TTL/RS232 x2
	RS-422 x1
communication encryption	Scrambling encryption
Overall power consumption	≤ 24W air terminal
	≤ 10W ground terminal
ຂະຫນາດຜະລິດຕະພັນ	148x65x17ມມ
ນ້ ຳ ໜັກ ຜະລິດຕະພັນ	214g
ຊ່ອງສັນຍານ	DC 9~26V, typical value +12V@3A
ອຸນຫະພູມປະຕິບັດການ	-40~+85℃

Table 2 MCS and sensitivity (10ວາງຂອງສັນຍານ MHz)
ເລກລໍາດັບ	MCS	Total uplink and downlink throughput (Mbps)	ທີ່ລະອຽດອ່ອນ (dBm)
1	QPSK1/3	4.1	-99
2	QPSK1/2	6.0	-97
3	QPSK2/3	7.3	-96
4	QPSK3/4	8.4	-95
5	16QAM1/3	8.2	-94
6	16QAM1/2	12.0	-93
7	16QAM2/3	14.7	-91
8	16QAM3/4	16.9	-90

3. Product size and weight

3.1 Dimension diagram

3.2 Dimensions and Weight

• Size 148mm*65mm*17mm (including SMA 10mm)
• The weight of the whole machine is about 214g

4. Product interface definition

4.1 Interface Diagram

The interface of W1400-33-SMA equipment adopts J30J-25pin, and the interface has 1 ການສະຫນອງພະລັງງານ, 2 ພອດອະນຸກົມ, 1 RS-422, ແລະ 2 ພອດເຄືອຂ່າຍ.

4.2 Interface definition

ເລກລໍາດັບ	Pin name	Interface definition	Interface Description	signal direction
1	PWR	ການສະຫນອງພະລັງງານ DC 9~26V	Positive power supply	ຂ້າພະເຈົ້າ
2	PWR		Positive power supply	ຂ້າພະເຈົ້າ
3	GND		The negative pole of power supply	ຂ້າພະເຈົ້າ
4	GND		The negative pole of the power supply	ຂ້າພະເຈົ້າ
5	422A	serial port 3RS-422	Receive data RX+	ຂ້າພະເຈົ້າ
6	422B		Receive data RX-	ຂ້າພະເຈົ້າ
7	422Z		Send data TX-	ການ
8	422ແລະ		Send data TX+	ການ
9	TXD_A	serial port 1RS232/TTL	Send data TX	ການ
10	RXD_A		Receive data RX	ຂ້າພະເຈົ້າ
11	TXD_B	serial port 2RS232/TTL	Send data TX	ການ
12	RXD_B		Receive data RX	ຂ້າພະເຈົ້າ
13	GND		ພອດອະນຸກົມ 2 ground wire	ການ
14~16	IO1~3	*reserved*	*reserved*	IO
17	TX1P+	ພອດ Network 1	Send data TX+	ການ
18	TX1M-		Send data TX-	ການ
19	RX1P+		Receive data RX+	ຂ້າພະເຈົ້າ
20	RX1M-		Receive data RX-	ຂ້າພະເຈົ້າ
21	GND	grounding	ພອດອະນຸກົມ 1 ground wire	ການ
22	TX2P+	ພອດ Network 2	Send data TX+	ການ
23	TX2M-		Send data TX-	ການ
24	RX2P+		Receive data RX+	ຂ້າພະເຈົ້າ
25	RX2M-		Receive data RX-	ຂ້າພະເຈົ້າ

ຫມາຍ​ເຫດ​: Please confirm whether the serial port level of the device is TTL level or RS232 level.

5. The meaning of the product status light

Power light PWR (ສີຂຽວ)

When the PWR light is on, it means the device is powered on.

Synchronization light SYNC (ສີຂຽວ)

In the unsynchronized state, the light flashes. After synchronization, the light is always on.

Network port lights LAN1, 2 (ສີຂຽວ)

When the network port has data to send and receive, the network port light flashes.

Receive signal energy light (RSSI 3 green lights)

The more the energy lights are on, the stronger the signal-receiving strength is.

The RSSI light represents the received signal strength
The number of RSSI energy lights on	Received energy dBm
3 RSSI lights are all on	-45dBm or so
2 RSSI lights are on	-80dBm or so
1 RSSI light is on	-95dBm or so

module type	ຮູບແບບ	W1400-33-SMA series indicator status
		PWR light	SYNC lights	LAN 12 lights	RSSI 123 lights
host	not synchronized	Always on when powered on	ກະພິບ	Data sending and receiving, ກະພິບ	wipe out
host	after synchronization	Always on when powered on	always on	Data sending and receiving, ກະພິບ	Proportional to received signal strength
from	not synchronized	Always on when powered on	ກະພິບ	Data sending and receiving, ກະພິບ	search status
from	after synchronization	Always on when powered on	always on	Data sending and receiving, ກະພິບ	Proportional to received signal strength

When the master and slave devices are not successfully paired, the power PWR lights of the master and slave devices are always on, the SYNC lights are flashing, and the RSSI lights of the master device are all off. The RSSI of the slave device will always be in the search state. After the master and slave are synchronized, the SYNC light of the master and slave is always on. The master and slave RSSI lights show the received signal energy strength. When the network port is sending and receiving data, the corresponding LAN1 and 2 lights of the master and slave devices will flash correspondingly.