HD Portable COFDM Mobile Video Wireless Transmission System User Manual

COFDM Mobile Video Wireless Transmission users manual for COFDM-908T and COFDM-912T

Users Manual for COFDM Mobile Video Wireless Transmission

This is a manual for COFDM-912T and COFDM-908T. If the HD input is mentioned in the text, it refers to the COFDM-908T model. If the SD input is mentioned in the text, it refers to the COFDM-912T model. Please Pay attention to the distinction.

1. Features

  • altus integrated, consilio modulari
  • Modum capere COFDM technologiae, H.264 imaginem technology coding
  • Can transmit one 1080P HDMI signal and one unidirectional data up to 230400Kbps
  • humilis latency, the minimum end-to-end latency is 350ms
  • Omnia per communicationis,, timere parietum
  • High-speed travel-to-travel communication,
  • Aluminium calor mergi genus causa transfusor, shockproof and impact resistant
  • Non visus linea-of- (NLOS) mobile facilioris Transmissus, the transmission distance of 2W power is not less than 30 kilometers under the condition of no interference, the transmission distance of 5W power is not less than 50 chiliometrorum, and the transmission distance of 10W power is not less than 80 chiliometrorum
  • Maxima celeritate moveri possit 600Km / hora (metiri)
  • Synchroni receptionem et audio et video significationibus, summus definitione forma HDMI1080P multi-libitum, vexillum DVD-output definitione imaginis qualis
  • Tergum can animadverto video recording et qui accipit munera
  • 128-AES encryption, et frenum decryption
  • Can provide full customization

2. application

This product is mainly used in technical reconnaissance and evidence collection of public security and safety inspection departments, real-time picture transmission of drones and unmanned ships, radio and television broadcasting, broadcasting live broadcasting: pervagata passim agris, ludis lacus, socialis nuntiumVivamus aeria、Studio, mountaineering expeditions and more. Est enim idoneam real-time mobilis tradenda summus imagines in variis ambitibus, ut universa urbana areas, maria, et in montibus.

3: Parameter Indicators

1: transfusor (only standardized pictures, except for customization)

1 Watts PA transmitter
5 Watts PA Transmitter
10 Watts 20 Watts PA transmitter

Product parameters:

modulationCOFDM
Operating intentioneDC11V~DC17V
working current1W:≤1.3A DC12V,5W:≤2.5A DC12V,10W:≤5.2A DC12V
interface imperiumStandard RS232 interface, 8 data bits, 1 paulum subsisto, pari etiam, baud rate: 19200
transparent notitia interfaceOne-via transparent serial portum transmissionis, 8 data bits, 1 paulum subsisto, pari impar support, pari etiam, wireless pari, baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 、230400
encryptionSupport CXXVIII-bit encryption
crebritate modulorum suaviorem tabularum faciendarumQPSK(4QAM)、16QAM、64QAM
porro error disciplinam1/2 2/3 3/4 5/6 7/8
militum intermissis1/32 1/16 1/8 1/4
Numerus autem eorum qui onera portabant2k
Sed in frequency2/3/4/5/6/7/8M Populus Novifacta Quotidiana
amnis lacus2000kbs ~ 20000kbs adjustable
transmit virtute1W/5W/10W
facilioris Transmissus frequencyAny frequency can be customized, the frequency is continuously adjustable, the adjustable range is ±20MHz, and the step is 1MHz
potentia ut idipsum genitriciLess than 0.2dB in 10MHz band
ratio humeroThe shoulder-to-shoulder ratio is better than -28dB at full power output
second harmonic≤ 45dB,
MORE32dB
video input720×480 60I(Audio), 720×576 50I(PAL), 720 50P, 720 60P, 1080 50ego, 1080 60ego, 1080 24P, 1080 25P, 1080 30P, 1080 50P, Sunt Varia cultuum genera adaptive.
HD interfaceHDMI
video format modum translitterandiH.264
vexillum tutelaOmnes generis gb-aluminium radiator, anti-ærugo, concussa fides, consilium
altiore mole102*80*30mm(1w)/102*90*30mm(5W)/188*47*34mm(10W)/228*55*40mm(20W)
pondus≤0.20KG (1W) / ≤0.27KG (5W) ≤1.5KG (10W) ≤2KG (20W)

2: receptor

One Antenna or Two Antenna COFDM Receiver

Product parameters:

Portable multi-bandwidth HD receiver parameters
Accipite frequency range170-860MHz VHF&UHF
Sed in frequency2/3/4/5/6/7/8MHz, ad libitum
M. gradum input-94DBM, ~ -15dBm (Sed in est at 8M)/-98DBM, ~ -15dBm (at 2M bandwidth)
M. initus IMMINENTIA50 ohms
M. initus iungoN caput
Demodulation modumCOFDM
Constellation wayQPSK, 16QAM, 64QAM (ad libitum)
porro error disciplinam1/2,2/3,3/4,5/6,7/8 (ad libitum)
Numerus autem eorum qui onera portabant2k,
militum intermissis1/32,1/16,1/8,1/4 (ad libitum)
video decodingMPEG-2MP@ML/H.264
screen aspect ratio4:3 16:9
Video output image720*576@8MHz 1080P@60P、50P、50ego、30P、
modus audio outputStereo unbalanced 300/ 200mv
audio output2audio output + 2Video output
Operating intentioneAC220V/DC12V <0.4A
Operating Temperature-20℃ ℃ ~ L +
physical dimension136*115*35mm non-standard all-aluminum shell
pondere armorum0.35Kg

4: Instructions for use

1: transfusor

  1. Functional area description

“ANT”: Transmitting antenna interface, please connect the antenna before powering on

“HDMI”: High-definition video input interface, input below 1080/50P

“Ctrl”: Transmitter tuner connection interface

“DC 12V”: DC12V power input port. “+” is the positive pole of the power supply, “-” is the negative pole of the power supply

“DC” is: Virtus indicator lux, when the light is always on, it means that the power input of the transmitting module is normal

“TS”: Video input detection indicator light, this light is always on to indicate video input and normal encoding

  1. Parameter Configuration Description

Connect the transmitter parameter adjuster, press the “MENU/OK” key to enter the menu, the encryption key and data serial port parameters are displayed first, press the left or right key to move the cursor, and the up and down keys to adjust the parameters

After the parameter setting is completed, press “MENU/OK” to enter the next menu, and the interface is displayed as shown in the figure

Press the left or right key to move the cursor, press the up or down key to adjust the required parameters, the interface prompts as shown in the figure

After all parameter settings are completed, press the “MENU/OK” key to confirm, and the display will be as shown in the figure.

After the setting is completed, the parameters are written successfully, and the display is as shown in the figure

  1. General Troubleshooting

autem: The light is off after the power is turned on: Check whether the power input meets the standard

b: “TS” indicator light is off: Check the video input connection cable, check whether the video input format conforms, and check whether the camera is interfered with (you can judge by holding the antenna with your hand).

C: The temperature of the transmitter is very low: check whether the current is normal (the deviation can be ±0.2A within the standard current).

d: Three lights are always on, and one of them is super bright: it means that the transmitter has failed the detection, and you can try to power off and restart (uncommon)

2: receptor

  1. Functional area description

“RF in1” “RF in2”: receiving antenna interface, it is recommended to connect the antenna and then turn on the power switch, because the static electricity of the human body may cause the receiver to crash.

“HDMI”: Video output interface, the output video format can be adjusted through the “HDMI” menu on the control panel.

“DC 12V”: Initus interface imperium, please strictly follow the power supply voltage requirements, and overvoltage input is strictly prohibited

“ON/OFF”: power switch.

“USB”: video storage interface, when the U disk is inserted, press the “EXIT” button to start the video recording, after the recording is successful, the video display will display the video recording time, and the stored file name is “TS”.

  1. LCD parameter description

autem:CH01 UNLOCKED(LCKED)

“CH01” means the channel number of the receiver, “UNLOCKED” means the received signal is unlocked, and “LCKED” means the signal is locked. “CH00” of the receiver is the initial writing channel, and the default channel corresponding to the normal operation of the transmitter is “CH001”

b: FREQ:602.0MHz

“602.0MHz” is the receiving frequency of the receiver, this frequency must be consistent with the frequency set by the transmitter, otherwise the receiver will not search or receive the signal from the transmitter

c: BW:6.0MHz

“BW” bandwidth, as shown in the figure, “BW: MHz” is understood as the RF bandwidth is 6MHz, this bandwidth must be consistent with the bandwidth set by the transmitter, otherwise the receiver will search for or cannot receive the signal from the transmitter

d: FEC:1/2

“FEC: 1/2” is the channel error correction, this parameter synchronizes the parameters set by the transmitter, and the receiver cannot be modified

e: GI,:1/32

“GI:1/32” is the channel guard interval, this parameter is set by the transmitter synchronously, and the receiver cannot be modified

f*:MAP: QPSK

“MAP: QPSK” is the modulation mapping, this parameter number is set by the transmitter synchronously, and the receiver cannot be modified

G: SNR:0.0dB(SNR:15.0dB)

“SNR: 15.0dB” is the signal quality (ille est, the signal-to-noise ratio, the larger the value, the better). When “0.0dB” is displayed, the signal quality is 0, and the receiver will not be able to lock

(SNR:15.0dB)” means the receiving signal-to-noise ratio is greater than 15dB. In the “QPSK” modulation mapping state, as long as the signal-to-noise ratio is greater than 6dB, the receiver can lock

H: PW:-72.1dBm(PW:-72.1)

PW is the received signal strength, (reference level value), the farther the transceiver end is relative to the distance, the weaker the signal strength is, and the larger the displayed value is, when the transmitter is not turned on, if the signal strength of the receiver is greater than -90dBm (such as -79.7dBm), it can be considered as adjacent frequency interference

  1. Parameter Configuration Description

Power on the receiver, and press the “MENU/OK” button to enter the menu, the first display is the menu of adjustable parameters, if you search for a specified frequency, directly press the “MENU/OK” button to enter the menu; if you want to remove the channel, press Press down to select “ListanbulChannel”, and then press “MENU/OK” to enter the menu operation; if you need to change the video output format, move the cursor to the “HDMI Mode” menu, press “MENU/OK” to enter, and select the video to be output After formatting, press the “MENU/OK” key to confirm.

The frequency search method is as follows. After entering the frequency setting menu, the interface is displayed as shown in the figure. Press the left or right key to move the cursor, press the up or down key to adjust the frequency, M. Sed in est, and secret key that match the transmitter, and press the “MENU /OK” key to search. Note that the transmitter must be turned on at this time, aliud, the receiver will not be able to lock because it cannot find the signal.

COFDM Mobile Video Wireless Transmission with a cheap price is including a transmitter and receiver for China directly

When the search is completed, press “MENU/OK” to confirm, and the channel is saved in the register of the assistant board, as shown in the figure. To save the channel to the receiver register, press the “MENU/OK” key and the right key at the same time.

After the receiver parameter setting is completed, the functions of the panel keys are as follows

”“: each individually selectable receiver channel “CH**”

”“: You can choose to view the hidden parameters of the receiver

“EXIT”: start and stop recording

  1. Video function

Insert the storage device into the “USB” interface of the receiver, press the “EXIT” button to start recording, and a blue recording time box will appear on the upper left corner of the video display as shown below

  1. General Troubleshooting

autem: The value after the receiver displays “-” is very low (Tx is not turned on): It means that the current channel has serious electromagnetic interference, and the normal value is -90- -100.

b: Cannot record video: check the U disk or replace the U disk.

C: No signal received: Check whether the channel frequency is consistent with the transmitter.

d: No video output: Check the connection line, power off, and restart to check whether there is a boot interface.

Comments

Tua inscriptio electronica non editis. Velit sunt insignis *

Discover more from iVcan.com

Adice nunc ut custodiant legendi atque aditum ad plenam archivi.

continue reading

Auxilium opus est whatsapp?
Exit mobile version