Disclaimer
- Please read the user’s manual carefully before use. Be sure to pay attention to the warnings and understand all points completely.
- Please strictly abide by the local radio frequency management regulations.
- Please follow the installation steps in the manual to use this product. Our company and agent will not take legal responsibility for the damage of equipment or personnel caused by the installation and modification of users.
- This copyright of this manual belongs to Great Mainlink Tech Co., LTD. No one may make copies without written consent.
Სიფრთხილით
Attention to installation
1. Before power on, make sure the antenna connection is reliably . წინააღმდეგ შემთხვევაში, it will cause damage to the device.
2. Make sure that the voltage is within the range of use.
3. Please pay attention to the EMC of all the electronic equipments on your drone.
4. It is recommended that the antenna should be installed downward and keep the antenna away from the metal on the drone.
5. Make sure to use the matching antenna.
Before use
1. Make sure that all cables are connected correctly and firmly.
2. No foreign objects (მაგ. liquids, sand, და ა.შ.) can be entered inside the device.
3. It takes 15 seconds for the device to start. Video and data cannot be transferred until the device has finished booting.
4. Please ensure that the environment in which the equipment is used is free of other electromagnetic interference.
5. When the signal weakens, you can improve the effect by changing the heading direction of the antenna.
Ჩასალაგებელი სია
Device X 2
მიმოხილვა
Industry drone market is developing very fast in recent years. The fight time and distance of drones are getting longer and longer. MK22/MK55, a long-range wireless transmission system, is designed for VTOL fixed wing and other long-range drones. The system can transmit video, fight control data, გიმბალის კონტროლის მონაცემები, and RC data simultaneously. With the advantage of high level intergration and powerful function, MK22/MK55 is a typical good product to meet long-range transmission requirements.
There are two frequency bands——800MHz、1.4GHz and 2.4GHz. Users can choose according to their needs. Please choose the suitable frequency band according to local regulations.
MK22 can transmit data and video to 22km, MK55 can transmit data and video to 55km, making it very suitable for long range drone.
If you use our recommend ground station, you only need one cable with connector to connect the device and your ground station.
*1Test under LOS and no interference conditions。
მახასიათებლები
Long distance Modulation
-MK22 Up to 22km @ LOS – OFDM
-MK55 Up to 55km @ LOS
Video interface Data interface
– Ethernet *1 – UART(TTL/RS232)/SBUS,
Hopping/Fixed Frequency სიხშირეზე
-დაფიქსირდა: user defined – 800MHz/1.4GHz/2.4GHz
-Hopping: ავტომატური Working mode
BW – Air unit can be :Point to point mode
-5/10/20 MHz Repeater mode
Work temperature Power range
– 40℃~+70℃ – DC 9~28V Battery 3S~6S
M52 Interface Description
საჰაერო ერთეული
side view
Ethernet
პუნქტების | Character | აღწერა | Input/Output |
1 | T+ | TX+ | O |
2 | T- | TX- | O |
3 | R+ | RX+ | მე |
4 | R- | RX- | მე |
2. UART1
პუნქტების | Character | აღწერა | Input/Output |
1 | G | GND | I / O |
2 | R | RS232 RX | მე |
3 | T | RS232 TX | O |
3. UART2
პუნქტების | Character | აღწერა | Input/Output |
1 | G | GND | O |
2 | R | TTL RX | მე |
3 | T | TTL TX | O |
4. ძალა
პუნქტების | Character | აღწერა | Input/Output |
1 | G | GND | I / O |
2 | V | +Vcc(9v~28v) | მე |
5. SBUS1
პუნქტების | Character | აღწერა | Input/Output |
1 | ს | SBUS OUT | O |
2 | V | +5v(I max 1A) | O |
3 | G | GND | I / O |
6. SBUS2
პუნქტების | Character | აღწერა | Input/Output |
1 | ს | SBUS OUT | O |
2 | V | +5v(I max 1A) | O |
3 | G | GND | I / O |
7. Კვების ინდიკატორი
This indicator is solid green when air unit is booting.
8. Link მაჩვენებელი
LED Pattern Description |
solid green Wireless link is established |
light off Wireless link is lost |
9. Status Indicator
LED Pattern(Blink only in booting) Description |
Blink 2 times Initialization OK, Frequency is 1.4GBlink 1 time Initialization OK, Frequency is 800M |
Blink 3 times Switch mode (Swith from air to ground, vice verse) |
Blink slow all the time Enter configuration mode |
Blink fast all the time Device abnormal |
10. SMA antenna connector.
- Fiber glass antenna.
- OLED display.
- Battery
- Connector.
პუნქტების | აღწერა | Input/Output |
1 | Rx+ | მე |
2 | Rx- | მე |
3 | Tx+ | O |
4 | Tx- | O |
5 | UART1 TX (RS232) | O |
6 | UART1 RX (RS232) | მე |
7 | UART2 TX (RS232) | O |
8 | UART2 RX (RS232) | მე |
9 | NC | |
10 | RC1_IN | მე |
11 | RC2_IN | მე |
12 | +5ვ | O |
13 | GND | I / O |
14 | GND | I / O |
15 | GND | I / O |
16 | GND | I / O |
17 | GND | I / O |
18 | GND | I / O |
19 | VCC (9v~28v) | მე |
20 | VCC (9v~28v) | მე |
სპეციფიკაცია
კატეგორია | საქონელი | დეტალი |
უკაბელოᲨესრულება | სიხშირის დიაპაზონი | 800MHz/1.4GHz |
სიხშირის დიაპაზონი | 800MHz:806MHz~825MHz1.4GHz:1427MHz~1447MHz2.4GHz: 2400~2480MHz | |
ზოლის სიგანე | 5MHz/10MHz/20MHz | |
მოდულაცია | OFDM | |
EIRP | MK22: 30dBm±1dBMK55: 33dBm ± 1dB | |
მგრძობიარობა | 95-95dBm | |
დიაპაზონი | MK22: 22კმMK55:55კმ*1 | |
ბიტის სიჩქარე | 30Mbps @ 20MHz | |
Power Range | DC 9 ~ 28V | |
ენერგომოხმარება | ≤8.5W | |
Interface | ანტენა | High School *2 |
ძალა | XT30 | |
UART | TTL 3.3V,1 დაწყების bit, 8 მონაცემთა ბიტი, 1 გაჩერება ცოტა, no parity., Baud განაკვეთი 115200 (ნაგულისხმევი),57600, 38400, 19200, 9600 | |
UART1 და UART2 | ||
SBUS | SBUS_IN | |
SBUS_OUT | ||
Ethernet | 4 pin | |
Button | 1 | |
გადართვა | საჰაერო და მიწის გადართვისთვის | |
ანტენა | Interface | High School |
ტიპი | Საჰაერო:Glue stick antenna 20cmGround:Fiber glass antenna, penal antenna | |
პოლარიზაცია ტიპი | ვერტიკალური | |
Gain | Საჰაერო:2.5dBiGround:12dBi | |
SWR | ≤2.0 | |
გარემოს | Work temperature | -40℃ ~ + 70 ℃ |
შენახვის ტემპერატურა | -40℃ ~ + 85 ℃ | |
სინესტე | 5~ 95%,არაკონდენსირებული | |
გარეგნობა | ზომა | 112 X 63.5 X 19 mm |
წონა | 143ზ |