独自のファームウェアを RV1126 AI IPC カメラに書き込む方法
独自のファームウェアを RV1126 AI IPC カメラに書き込む方法
The first burning needs to use DriverAssistant to install the driver.
目次
Enter Maskrom/loader
書き込みモードに入るには 3 つの方法があります:
1. reboot loader
After entering the system, run the reboot loader, and automatically enter the loader mode after restarting
Uboot：
After powering on, quickly press Ctrl + C to interrupt the Uboot startup, and then type the download command.
2. Short Circuit
Power off, use tweezers to short the two points in the red circle above, and power on
3. Burning
Open RKDev_Tool, and it will display “found a Maskrom device” or “found a Loader device”:
Select “Upgrade Firmware”:
Click on “Firmware”:
A file selection dialog window pops up, select update.IMG, it may be stuck for a few seconds to load the firmware.
Then click upgrade:
You can see that the log on the right starts to show the burning process.