Ntinye HDMI na IP encoder web ui bụ sistemụ maka ntinye vidiyo HDMI anyị na-ebufe mmepụta iyi ethernet RJ45 IP dị ndụ.. Adreesị IP ndabara nke ntinye HDMI anyị na bọọdụ koodu koodu IP bụ http://192.168.1.30. Ọ bụrụ na kọmputa gị nwere ike ping na adreesị a nke ọma, Biko mepee adreesị IP a na ihe nchọgharị ahụ. Ị nwere ike ịlele nhazi oke dị ugbu a ma ọ bụ gbanwee ya dịka mkpa ngwa siri dị.

Note: Ka ịgbanwee paramita nhazi ọ bụla site na Weebụ UI, A ghaghị ịmalitegharị usoro ngwaike maka nhazi ahụ gbanwere ka ọ rụọ ọrụ.

Ntinye HDMI na ntọala UI ihe ntanetị IP

1. Ibe menu netwọkụ

IP mpaghara: Adreesị IP ndabara nke ntinye HDMI na bọọdụ koodu koodu IP;

IP dịpụrụ adịpụ: Adreesị IP nke sistemụ ngbanwe ngbanwe dịpụrụ adịpụ ewepụtara site na netwọkụ. Ihe ndekọ vidiyo nke bọọdụ ngbanwe na data ọdụ ụgbọ mmiri serial na data ọdịyo nke bọọdụ ngbanwe nakọtara. (bọọdụ ngbanwe n'ozuzu nwere ọdụ data serial yana interface ntinye ọdịyo) a ga-eziga na sistemụ ngbanwe dị na njedebe nke netwọk site na ọdụ ụgbọ mmiri Ethernet. A ga-ebufe data ọdụ ụgbọ mmiri nke sistemu nzuzo na ọdụ ụgbọ mmiri nke bọọdụ ngbanwe nke IP dịpụrụ adịpụ..

Ntọala IP dịpụrụ adịpụ dị naanị ma ọ bụrụ na ịzụrụ otu ụzọ bọọdụ gụnyere ndị transmitter na-erite.

Port: Nọmba ọdụ ụgbọ mmiri nke ezigara data etinyere na ya site na UDP (nọmba ọdụ ụgbọ mmiri ahaziri n'akụkụ decoder kwesịrị ịdị ka nọmba ọdụ ụgbọ mmiri ahaziri n'akụkụ koodu.).

Protocol: Hazie protocol njem nke sistemụ ngbanwe na-eji. Site na ndabara, UDP protocol na-ebelata igbu oge, na ọ na-akwado na decoded-na-point UDP-TS iyi nnyefe nke video data n'etiti usoro. Usoro RTSP na-akwado njedebe ngbanwe iji rụọ ọrụ RTSP na-achọrọ (yiri usoro igwefoto IP). Ha abụọ pụtara na a na-eji usoro UDP na usoro RTSP mee nkwanye vidiyo a n'otu oge..

2. Ibe NchNhr vidiyo

Low latency: nhọrọ ọnọdụ nzuzo dị ala. Naanị mgbe ejikọrọ usoro ngbanwe dị ala-latency H264 (the corresponding decoding system is also set to “low latency”), Ee enwere ike ịlele ebe a. Iji jikọọ na sistemụ ngbanwe H265 na H264 ọ bụla ọzọ, lelee Mba ebe a. (Àgwà dị ala dị ala bụ naanị maka ụdị na-akwado codec dị ala, biko kpọtụrụ ụlọ ọrụ maka nkọwa).
H265: Ọ bụrụ na achọrọ itinye koodu H265 (naanị maka ụdị na-akwado ntinye koodu H265, biko kpọtụrụ ụlọ ọrụ maka nkọwa), lelee Ee ebe a. Atule Mba pụtara H264 ngbanwe.
Bitrate: Ntinye vidiyo kacha ntọala bitrate. 0 pụtara iji ntọala ndabara sistemụ (iyi kacha iyi vidiyo nke ndabara sistemụ bụ 3.12Mbps).
GOP: Ndozi vidiyo m na-esetịpụ ntọala etiti oge, 0 pụtara ntọala ndabara sistemụ.

3. Ibe NchNhr ọdịyo

Audio:
on —- gbanye ntinye ntinye ọdịyo na ọrụ ntinye;
off —- gbanyụọ ntinye ntinye ọdịyo na ọrụ ntinye.
Ọgọst: Sistemụ ngbanwe nwere ike ịnata data ọdịyo ezitere site na sistemụ ngbanwe dịpụrụ adịpụ site na netwọk maka ngbanwe na mmepụta.
Yes —-Enable audio decoding output;
No—-Disable audio decoding output function.
Anụ:
Auto—-The system automatically captures audio from the current video input interface; ọmụmaatụ, when the current video input channel is HDMI, select Auto to capture digital audio from the HDMI interface; when the current video input channel is AV, select Auto to capture digital audio from the HDMI interface. Capture analog audio from the AV interface.
Anlg—-The system only captures analog audio from the AV interface.
Note: When reverse voice support is required (the video decoder sends voice to the video encoder), the audio input (ain) here must be configured in Anlg mode.
Lin:
Mic —- Capture analog audio from the AV interface in Mic in mode. (The hardware connection of the encoding system must also be in Mic in mode)
Lin —- Collect analog audio from the AV interface in Line in mode. (The hardware connection of the encoding system must also be in Line in mode)

4. Serial Menu Page

Our HDMI to IP encoding board has one data serial port. Mgbe data serial ọdụ ụgbọ mmiri anakọtara site na bọọdụ encoder kwesịrị ka ebufe ya na ọdụ ụgbọ mmiri kwekọrọ nke bọọdụ decoder dịpụrụ adịpụ site na netwọkụ., Edebere usoro nzikọrịta ozi ọdụ ụgbọ mmiri ebe a. Ọ bụrụ na ejighi serial port nke bọọdụ ngbanwe, ntọala ebe a enweghị mmetụta na ọrụ ndị ọzọ nke usoro ahụ.

Baud_Rate: Tọọ ọnụego baud nke ọdụ ụgbọ mmiri serial data nke bọọdụ ngbanwe.
Mmakọ: Tọọ ụdị nkwekọ nke ọdụ data serial nke bọọdụ ngbanwe.
Ọ dịghị onye/odd/Ọbụna kwekọrọ: enweghị nchikota/odd parity/ọbụlagodi ụdị nkwekọ.
Oghere kachasị(MS): Tọọ oge nnyefe kacha nke data ọdụ ụgbọ mmiri (iji hụ na arụ ọrụ ozugbo).
Oke kacha: Tọọ nha ngwungwu kacha nke data ọdụ ụgbọ mmiri (ọ bụrụ na ebufere ya site na njikọ ikuku, ekwesịrị ịzere na ngwugwu IP nnyefe dị oke).

5. Ibe menu RTSP

Mgbe edobere ụkpụrụ nnyefe modul ka ọ jiri Rtsp na ihe menu netwọkụ, ị nwere ike ịlele URL ịnweta iyi vidiyo ozugbo nke sistemụ ngbanwe site na ibe a. Onye ahịa RTSP (VLC, wdg) nwere ike ịnweta iyi vidiyo RTSP nke sistemụ ngbanwe site na URL a.
(Rịba ama na mkpụrụedemede ukwu na obere mkpụrụedemede enweghị ike ịmehie)

6. Ibe menu sistemu

A na-eji menu a iji lelee ụdị sọftụwia nke sistemu bọọdụ ngbanwe wee melite ngwanro ngwa site na UI Weebụ..