How to upgrade wireless video transmitter and receiver firmware of TX900

upgrade wireless video transmitter and receiver firmware

Models for which the upgrade program applies

Upgrade Firmware Download

This v1.5.0 version of the firmware adds TCP server support to the D2 and D3 serial ports (configured through the webpage), and the customer can upgrade the webpage according to the prompts in the document.

Bilješka: Nakon nadogradnje, the original parameters of the customer (such as IP address) remain unchanged. Download the upgrade wireless video transmitter and receiver firmware.

update_image_v1.4.3_fixup_2023.1.4

update_image_v1.5.0_2022.12.13

dlm_update_image_v2.5.2_2023.11.1

Upgrade Firmware Steps

1. Connect the transmitter or receiver to the computer through a network cable, enter 192.168.1.11 in the browser of the computer (if you have not modified the default IP address), enter the Web server, and switch the system page.
2. 
3. Click the button next to “Upload file”, and select the upgrade file (be careful not to unzip it).
4. 
5. After selecting the file, click the Upload button to start uploading the upgrade firmware.
6. 
7. A prompt box will pop up if the firmware is uploaded successfully. , and the size of the uploaded file is displayed.
8. 
9. After confirming that the file size is correct, click the Upgrade button to start upgrading the firmware (be careful not to disconnect the power of the device after starting to upgrade the firmware).
10. 
11. After the device is upgraded, there will be a prompt message and it will restart automatically.
12. 

What’s new in each version of upgrade wireless video transmitter and receiver firmware？

verzija 1.1(2021.4.29)

1. Modify the implementation logic of door-to-door transparent transmission (from the perspective of customers)
2. Modify the default value of m_packet to 400
3. Separation of sending/receiving ports for door-to-door transparent transmission

verzija 1.2(2022.4.2)

1. Add higher serial port baud rate support
2. Added reboot support to the System page
3. 3-color led marquee prompt at startup (convenient for production testing
4. Make the CFG drop-in use the same as the module’s own drop-in

verzija 1.3(2022.4.25)

1. Add mesh support

verzija 1.4(2022.8.23)

1. Improve audio processing
2. 2022.9.30 Disable the D3 serial port mode switching function
3. 2022.10.20 Improve the mesh configuration
4. 2022.11.24 Add AT^CONFIG command for internal hidden configuration

verzija 1.5(2022.12.15)

1. Added TCP server support for D2 and D3 serial ports
2. 2022.12.30: Forbidden to configure web pages to Mesh mode
3. 2023.1.4: Multi-cast prohibits spontaneous transmission.
4. 2023.7.25: Improve fix power processing
5. 2023.8.2: Add TCP server for parameter configuration
6. 2023.9.7: Add IP read and write AT command processing to the TCP server
7. 2023.9.13: Added customer setting switch and TDD uplink and downlink configuration
8. 2023.9.26: Added backup IP (192.192.192.192), supporting Chinese and English switching
9. 2023.10.19: Solve the annoying problem of browser caching web pages.

Do you have any questions about upgrading the wireless video transmitter and receiver firmware, molimo kontaktirajte nas.

Now the default shipping configuration of the D3 serial port is used as a transparent serial port. How can I need to modify it for AT command interaction?

The default shipping configuration of the D3 serial port is used as a transparent serial port. If the customer needs to modify it for AT command interaction, the internal AT command can be sent under the webserver to modify the role of the D3 serial port. The specific steps are as follows:

1. Log in to the debug page of the web server

2. Enter the “AT^CONFIG=1,0,0” command in the “At Command” column and the “u redu” prompt will be returned if successful

3. Enter “AT^CONFIG?” command in the “At Command” column to check again to confirm whether the configuration is successful

Bilješka:

1. After the above modification, you need to restart the power to take effect
2. If you need to modify D3 to be a transparent serial port again, just replace the above AT command with “AT^CONFIG=0,0,0”.