ʻIkepili ʻIke ʻIke Lekiō Telemetry no UAV drone lōʻihi 1-10-30-50-100-150km
Papa helu
Introduction
Ka makamake nui o
Vcan1888 series | |||
hō'ikeʻano e hana ana i alapine (frequency) Modulation Spread spectrum mana TX EYI Distance Work mode Transmission Rate ʻIkepili mau ' Control interface kukuna mau ' Voltage range System power consumption L*W*H hanakimi wela |
1888-30-IPEX 902~928MHz 2FSK FHSS 1W air-to-ground 60KM P2P, P2MP, Mesh 57.6kbps~276.4kbps TTL TTL IPEX DC3.3V <10W 33mmx26.5mmx3.5mm -40~+70° |
1888-MINI-DT01 902~928MHz 2FSK FHSS 1W air-to-ground 60KM P2P, P2MP, Mesh 57.6kbps~276.4kbp GH1.25-4PIN ʻaʻole kekahi SMA female head DC7V-26V <10W 53mmx40mx13mm -40C~+70 |
1888-MINI-DT02 902~928MHz 2FSK FHSS 1W air-to-ground 60KM P2P, P2MP, Mesh 57.6kbps~276.4kbps Type C to USB ʻaʻole kekahi SMA female head USB 5V 10W 53mmx40mmx13mm -40° C ~ + 70 ° C |
FAQs
Our 2X UART wireless transceiver supports changing 2X TTL and 2X RS232 in the metal box.
If you need to have one TTL and one RS232, we have to set it to both RS232 and add one extra board to support the RS232 ⇄ SBus converter board.
The mini data transmission can be forced into configuration mode by pressing and holding the SET key and powering on. The baud rate is forced to 9600.
Please don't worry, our wireless data transmitter and receiver supports AES128 encryption and decryption.
Our device uses AES256 encryption, the encryption key length is 32 nāʻai, and you need to enter 1~32 characters.
PC Configuration Software
https://drive.google.com/file/d/1mAlnRRlF9bPQHyxw4CYF_qwW_GiHX9zh/view?usp=kaʻana like
What you should tell us when you place the order?
Networking Type
Is it used point-to-point or point-to-multi-point? If it is point-to-multi-point, how many transmitters and how many receivers are there?
Helu Baud
Is the factory serial port baud rate changed to 115200bps, or is it a special baud rate?
Data Connect Type
Are the TTL level or RS232 level?