wireless video radio ip mesh transceiver

Do you know if there is any software or tool available that I can use to transmit video through the radio?

Our wireless video radio is like an invisible net cable to connect two IP devices. Me kena ivakaraitaki, please connect to your ip camera on the radio rj45 (transmitter), and PC to connect to another radio (iciqociqo).
Every ip camera has an ip address, then you use the IP camera player to watch the video on the computer.

A Client sent us a video and asked the wireless video radio IP MESH transceiver about the frequency range and if it supports a frequency hopping function.

Bula, I am transmitting data between the radios and managed to change settings to 20dBm [30 dBm] kaukauwa.
I am currently transmitting and receiving an MP4 video between two computers and it is successful.
Ia, we have a problem with the frequencies of the data transfer. We used a spectrum analyzer to check the frequency we were using, but the spectrum analyzer showed that the frequency was all over the place.
May I get your help to know if the radio is by any chance frequency hopping/ changing dynamically? Why the radio is transmitted at different frequencies?

Here is the reply from our engineer.

This is the system self-test import frequency point. When no transmission signal or data is received, it will always self-check the search status.
When the transmission signal and data are received, the frequency waveform will be normal.

Application of the wireless video, radio ip mesh transceiver

I want to explain our working scenario. Two drones will be in the air with an HD camera and one modem will be on the ground connected to the display. The modem in the air will send videos from the air to the ground + some more useful information. They will also receive some camera control and PTT commands from the ground.
A modem on the ground will receive videos from the air, display them on some LCD, or send them on ethernet. It will also send camera control + PTT commands to drones in the air.

two-way mesh wireless video data link and Power Amplifier

The output of Vcan1401 is 5W in the ad hoc network mode and 10W in the point-to-point mode. Because the two modes require different indicators, the indicators required in the ad hoc network mode are much higher, so the output power will be deliberately adjusted downward.

TX900-mesh is different.
The hardware of ad hoc, dusia na veika me kilai, and point-to-point multipoint star networking modes are the same (the output power is the same), but the software and firmware are different.

Vcan1401 is a WiFi frequency conversion solution, and TX900 is an SDR solution. The performance is very different.

Is the UART sent to all nodes in TX900 star-networking?

Io.

The star network can work in point-to-point mode, point-to-multipoint mode, and relay mode. The Mesh version is a self-organizing network and can be self-organized in various ways.

TX900-Mesh is available in 3, 10 and 50km versions.

Can you share the user manual of tx900?

The web UI of TX900-2W and 10W is the same. This is the web UI usage instructions.