60KM TDD Video and data integration users manual

version history

date	Kena	Modify the description
20230612	V1.0	initial version

Table of contents

version history 2

1. Product Overview 4

2. Product indicators 4

3. Product size and weight 5

3.1 Dimension Diagram 5

3.2 Dimensions and Weight 5

4. Product interface definition 6

4.1 Interface Diagram 6

4.2 Interface Definition 6

5. The meaning of the product status light 7

1. Product Overview

W1400-33-SMA is a self-developed TDD two-way video data integration medium and long-distance wireless image transmission equipment. product has Real-time interference detection, digidigi ni ivakarau ni veivakarautaki, adaptive code stream and automatic power control, And other functions, greatly improving the ability of anti-multipath and anti-jamming. Ena gauna vata o ya, it also has the characteristics of high reliability, tudei vinaka, kei na lokuyara lailai. This product uses Dual network ports, three serial ports, and other multi-interface designs. To a greater extent, it meets the diverse and multi-functional needs of customers in the fields of drones, taqomaki ni bukawaqa, vakadidike, vakadikeva, and many other application scenarios. The maximum transmission distance in the case of a good air-to-ground line of sight in a good environment 60KM. To meet the needs of customers for medium and long distances.

2. Product indicators

iTuvatuva 1: W1400-33-SMA technical specification list
System parameters	technical indicators
Device model	W1400-33-SMA
device name	TDD two-way wireless image data integrated equipment
Cakacaka vakarauta na kena vagauna	1350~1470MHz
RF channel	2SEGA&2R
vakauta na kaukauwa	1.7W/32dBm
Yawa ni vakadewainisiga	Air-to-ground 60KM (common vision)
channel bandwidth	10MHz
Modulation	QPSK/16QAM
Dau vakilai na iciqociqo	see table 2
maximum rate	17Mbps@16QAM3/4
transmission delay	One-way 10ms
Veisoqaqa ni YD	SMA x2
device interface	Network port x2
	TTL/RS232 x2
	RS-422 x1
communication encryption	Scrambling encryption
Overall power consumption	≤ 24W air terminal
	≤ 10W ground terminal
Levu ni ivoli	148x65x17mm
product weight	214lako
Vakalivaliva ni kena cicivaki	DC 9~26V, typical value +12V@3A
Era sa vakayagataki tiko e vakayagataki	-40~+85℃

iTuvatuva 2 MCS and sensitivity (10MHz biau)
serial number	MCS	Total uplink and downlink throughput (Mbps)	Qaqarauni (dBm)
1	QPSK1/3	4.1	-99
2	QPSK1/2	6.0	-97
3	QPSK2/3	7.3	-96
4	QPSK3/4	8.4	-95
5	16QAM1/3	8.2	-94
6	16QAM1/2	12.0	-93
7	16QAM2/3	14.7	-91
8	16QAM3/4	16.9	-90

3. Product size and weight

3.1 Dimension diagram

3.2 Dimensions and Weight

• Size 148mm*65mm*17mm (including SMA 10mm)
• The weight of the whole machine is about 214g

4. Product interface definition

4.1 Interface Diagram

The interface of W1400-33-SMA equipment adopts J30J-25pin, and the interface has 1 kakana ni kaukauwa, 2 gacagaca ni soqo, 1 RS-422, kei na 2 ilawalawa vakacakacaka gacagaca.

4.2 Interface definition

serial number	Pinitaka na yaca	Interface definition	Interface Description	signal direction
1	PWR	kakana ni kaukauwa DC 9~26V	Positive power supply	Au
2	PWR		Positive power supply	Au
3	GND		The negative pole of power supply	Au
4	GND		The negative pole of the power supply	Au
5	422E DUA	serial port 3RS-422	Receive data RX+	Au
6	422B		Receive data RX-	Au
7	422Z		Send data TX-	OI KEMUNI
8	422IO		Send data TX+	OI KEMUNI
9	TXD_A	serial port 1RS232/TTL	Send data TX	OI KEMUNI
10	RXD_A		Receive data RX	Au
11	TXD_B	serial port 2RS232/TTL	Send data TX	OI KEMUNI
12	RXD_B		Receive data RX	Au
13	GND		Ni waqa 2 ground wire	OI KEMUNI
14~16	IO1~3	*reserved*	*reserved*	IO
17	TX1P+	Gacagaca ni veitaratara 1	Send data TX+	OI KEMUNI
18	TX1M-		Send data TX-	OI KEMUNI
19	RX1P+		Receive data RX+	Au
20	RX1M-		Receive data RX-	Au
21	GND	grounding	Ni waqa 1 ground wire	OI KEMUNI
22	TX2P+	Gacagaca ni veitaratara 2	Send data TX+	OI KEMUNI
23	TX2M-		Send data TX-	OI KEMUNI
24	RX2P+		Receive data RX+	Au
25	RX2M-		Receive data RX-	Au

Me kilai: Please confirm whether the serial port level of the device is TTL level or RS232 level.

5. The meaning of the product status light

Power light PWR (drokadroka)

When the PWR light is on, it means the device is powered on.

Synchronization light SYNC (drokadroka)

In the unsynchronized state, the light flashes. After synchronization, the light is always on.

Network port lights LAN1, 2 (drokadroka)

When the network port has data to send and receive, the network port light flashes.

Receive signal energy light (RSSI 3 green lights)

The more the energy lights are on, the stronger the signal-receiving strength is.

The RSSI light represents the received signal strength
The number of RSSI energy lights on	Received energy dBm
3 RSSI lights are all on	-45dBm or so
2 RSSI lights are on	-80dBm or so
1 RSSI light is on	-95dBm or so

module type	ivakaraitaki	W1400-33-SMA series indicator status
		PWR light	SYNC lights	LAN 12 lights	RSSI 123 lights
host	not synchronized	Always on when powered on	flashing	Data sending and receiving, flashing	wipe out
host	after synchronization	Always on when powered on	always on	Data sending and receiving, flashing	Proportional to received signal strength
from	not synchronized	Always on when powered on	flashing	Data sending and receiving, flashing	search status
from	after synchronization	Always on when powered on	always on	Data sending and receiving, flashing	Proportional to received signal strength

When the master and slave devices are not successfully paired, the power PWR lights of the master and slave devices are always on, the SYNC lights are flashing, and the RSSI lights of the master device are all off. The RSSI of the slave device will always be in the search state. After the master and slave are synchronized, the SYNC light of the master and slave is always on. The master and slave RSSI lights show the received signal energy strength. When the network port is sending and receiving data, the corresponding LAN1 and 2 lights of the master and slave devices will flash correspondingly.