Ultra-Wideband FPV Video Receiver (200MHz–7.5GHz) gamit ang UART Programmable Frequency Scanning
Talahanayan ng nilalaman
Description
Ultra-wideband FPV receiver na sumusuporta sa 200MHz–7.5GHz frequency range na may UART programmable control, -96pagiging sensitibo ng DBM, Output ng PAL/NTSC, at 7–36V input. Compact, magaan na timbang, at mainam para sa mga custom na RF video application, Drone FPV Systems, at advanced na pagsubaybay sa signal.
Pangkalahatang-buod
Ang Ultra-Wideband FPV Video Receiver ay isang high-performance na analog video reception module na idinisenyo para sa advanced na FPV (Unang Tao na Pagtingin) system at custom na RF application. Sinasaklaw ang isang napakalawak na saklaw ng dalas mula 200MHz hanggang 7.5GHz, ang receiver na ito ay nagbibigay ng walang kaparis na flexibility kumpara sa tradisyonal na fixed-band FPV receiver.
Ininhinyero para sa mga propesyonal, mga developer, at mga mahilig, sinusuportahan ng device ang UART (serial) programmable frequency control, na nagpapahintulot sa mga user na tumukoy ng mga custom na frequency point at mga hanay ng pag-scan. Ginagawa nitong perpekto hindi lamang para sa mga FPV drone system kundi pati na rin para sa RF experimentation, Pagmamanman ng signal, at multi-band video reception.
Na may mataas na sensitivity ng -96dBm, tinitiyak ng receiver ang matatag na pagganap ng video kahit na sa mga mapaghamong kapaligiran. Sinusuportahan nito ang parehong PAL at NTSC analog na mga format ng video, tinitiyak ang pagiging tugma sa isang malawak na hanay ng mga camera, nagpapakita, at mga sistema ng kontrol sa paglipad.
Ang compact at magaan na disenyo (only 9.9g) ginagawang madali ang pagsasama sa mga UAV system, mga istasyon ng lupa, o mga portable na pag -setup ng pagsubaybay. Isang malawak na saklaw ng boltahe ng input na 7–36V (2S–6S na suporta sa baterya) nagbibigay-daan sa mga flexible na opsyon sa kapangyarihan para sa iba't ibang kaso ng paggamit.
Gumagawa ka man ng custom na FPV system, pagsasagawa ng RF testing, o pagbuo ng mga susunod na henerasyong wireless video solution, ang ultra-wideband receiver na ito ay naghahatid ng katumpakan, kakayahang umangkop, at pagiging maaasahan.
Mga tampok
1. Sakop ng Dalas ng Ultra-Wideband
Supports an extensive frequency range from 200MHz to 7.5GHz, enabling compatibility with multiple RF bands and non-standard video transmission systems. This wide coverage eliminates the limitations of traditional FPV receivers restricted to narrow frequency bands.
2. UART Programmable Frequency Control
Equipped with a serial (UART) interface that allows users to:
- Customize starting frequency
- Define frequency steps
- Perform manual frequency scanning. (automated frequency scanning does not support now)
- Integrate with flight controllers or external systems
This feature provides unmatched flexibility for developers and advanced users.
3. Mataas na Sensitivity (-96dBm)
The receiver is optimized for long-range and low-signal environments. Its high sensitivity ensures:
- Stable video reception
- Reduced signal dropouts
- Improved performance in interference-heavy environments
4. Malawak na pag -input ng boltahe (7-36V DC)
Compatible with 2S to 6S LiPo batteries, the built-in high-efficiency DC/DC power system ensures stable operation across a wide voltage range.
5. Compact at magaan na disenyo
- Timbang: 9.9g (walang antenna)
- Ang laki: 40.4 × 26.8 × 5.0 mm
Ideal for integration into drones, portable receivers, o mga naka -embed na system.
6. PAL/NTSC Video Output Compatibility
Supports both major analog video standards:
- KALARO
- NTSC
Ensures compatibility with global FPV cameras and display systems.
7. Dual Button Control Interface
- Maikling pindutin: Switch frequency channel
- Mahaba pindutin ang (3 segundo): Switch frequency band
Simple and intuitive manual operation without requiring external tools.
8. SMA Antenna Interface
Standard SMA connector allows easy integration with a wide range of antennas for different frequency bands and applications.
Mga pagtutukoy
| Parameter | Description |
|---|---|
| Frequency Range | 200MHz – 7.5GHz |
| Input na boltahe | 7-36V DC (2S–6S LiPo) |
| Power System | High-efficiency DC/DC |
| Pagiging sensitibo | -96 dBm |
| Format ng video | KALARO / NTSC |
| Mga dimensiyon | 40.4 × 26.8 × 5.0 mm |
| Timbang | 9.9g (walang antenna) |
| Antenna Connector | SMA (lalaki) |
| Interface ng Kontrol | UART (Serial) |
| Button Control | Band & Pagpili ng Channel |
| Video Interface | Analog output ng video |
| Mode ng Pagpapatakbo | Manwal / UART programmable |
Mga aplikasyon
1. FPV Drone Systems
Perfect for long-range and multi-band FPV drone setups where flexibility in frequency selection is critical.
2. RF Signal Monitoring
Useful for engineers and technicians who need to monitor analog video signals across a wide spectrum.
3. Custom Wireless Video Systems
Ideal for developing proprietary or experimental wireless video transmission systems.
4. Ground Stations
Can be integrated into portable or fixed ground stations for UAV operations.
5. Research and Development
Supports academic and industrial R&D projects involving RF communication and video transmission.
6. Multi-Band Surveillance Systems
Suitable for applications requiring reception of signals across different frequency bands.
Mga pagpipilian sa pagpapasadya
We support flexible customization to meet different project and OEM requirements:
1. Frequency Range Customization
- Adjust default frequency bands
- Pre-configure specific frequency ranges
2. Pagpapasadya ng firmware
- Custom UART command sets
- Proprietary communication protocols
- Frequency scanning algorithms
3. Interface Customization
- Mga pagbabago sa uri ng connector
- Cable length and pinout adjustments
4. Branding and Packaging
- OEM/ODM logo printing
- Custom packaging design
5. Hardware Modifications
- Enclosure changes
- Heat dissipation optimization
- Integration into larger systems
FAQ (Madalas na nagtanong)
Q: Is there an ultra-wideband video receiver (Vrx) that supports frequencies up to 12 GHz? Are there any plans for such a product?
A: Sa kasalukuyan, our video receivers support frequencies up to 7.5 GHz. Support for the 12 GHz band is not available in our current lineup. We are currently developing a new FPV VRX with an extended frequency range of up to 10 GHz. Expanding into higher frequency bands involves significant engineering challenges and requires thorough development and testing, so we are not able to provide a confirmed release timeline at this stage.
Q1: What frequency range does this receiver support?
A: The receiver supports an ultra-wide frequency range from 200MHz to 7.5GHz, allowing operation across multiple RF bands. The default antenna frequency range is 860-8000MHz. If you modify the operation frequency is from 200-860MHz, you have to use this range antenna.
Q2: Can I customize the frequency manually?
A: Oo. You can adjust frequencies using UART serial commands for precise control. You can set the frequency by sending a command. Halimbawa:bp:5765\r\n
This command sets the FPV VRX frequency to 5765 MHz.
Q3: How do I change the starting frequency via UART?
A: Connect the receiver to a serial tool, configure the correct COM port and baud rate, enable ASCII mode, send the desired frequency command, and restart the device.
Q: What frequency range is supported?
A: The system supports frequency input from 200 MHz sa 7500 MHz. Any user define frequency, Halimbawa: 980 MHz, 3765 MHz, 4988 MHz, at iba pa.
Q: Can I set multiple custom frequencies or scan frequencies automatically?
A: Sa kasalukuyan, only one custom frequency can be set at a time. Automatic frequency scanning (full-band scan) is not available in the current version.
Q: Does the device include preset frequencies?
A: Oo, several commonly used frequencies are preset for convenience.
A: Oo. In addition to the two hardware buttons, the receiver also provides a UART serial interface. You can send commands through this UART port to control the FPV VRX, such as changing frequency and potentially other functions.
A: It depends on the frequency range you switch to. The default antenna supports a very wide frequency range (humigit-kumulang 800 MHz sa 8 GHz). If your new operating frequency falls within this range, you generally do not need to replace the antenna. Gayunman, if you change to a lower frequency band such as 200–800 MHz, the default antenna may no longer perform efficiently, and replacing it with a compatible antenna designed for that range is recommended.
Dagdag pa, while wideband antennas offer convenience, you may achieve better performance by using an antenna tuned for a narrower frequency band. Narrowband antennas typically provide higher gain and improved signal quality within their specified range.
Q: Do you have any documentation describing the UART communication protocol?
A: Sa ngayon, there is no formal UART communication documentation available.The UART interface currently supports a single basic command for changing the frequency: bp:5765\rn This command sets the receiver frequency (in MHz). Aside from this frequency-setting command, no additional UART commands are supported at this time.
Q: If I send a UART command like bp:5765\r\n, will the receiver switch to 5765 MHz immediately? Do I need to reboot or confirm using buttons?
A: Oo, the receiver will switch to the specified frequency immediately after the command is received. No reboot or manual confirmation via hardware buttons is required. The change takes effect in real time as soon as the UART command is processed.
Q: Can I send multiple UART commands in sequence with different frequencies (hal., bp:5765\r\n, then another frequency, at iba pa.)?
A: Oo, you can send multiple commands in sequence. The receiver will automatically switch to the new frequency each time a valid command is received. Commands are processed one by one in the order they are sent. Gayunman, the FPV VRX can only operate on one user-defined frequency at a time. While each command is executed sequentially, only the most recently set frequency is retained. Any new command will overwrite the previously configured frequency.
Q: What is the approximate switching time from sending a UART command to getting a stable video signal?
A: After sending a UART command, the receiver typically switches to the new frequency within a few seconds. The time required for a stable video signal to appear depends on signal strength and quality. Under strong signal conditions, the video will appear quickly. In weaker signal conditions, it may take longer for the image to stabilize.
Q: Did I understand the UART settings correctly — 115200 baud, 8 data preno, Walang pagkakapare -pareho, 1 itigil ang bit, ASCII commands?
A: Oo, your understanding is correct. The UART interface uses the following configuration: Baud rate: 115200; Mga bit ng data: 8; Pagkakapare -pareho: Wala; Itigil ang mga bit: 1; Format ng utos: ASCII. This configuration (commonly referred to as 115200 8N1) is correct for communicating with the device.
Q: What UART voltage level is used on the board: 3.3V ttl, 5V ttl, o RS232?
A: The board uses 3.3V TTL UART logic levels. Only a shared ground (PAGWAWASTO) connection is required between devices for communication. Please note that the interface is not RS232 compatible, and RS232 signals must not be connected directly to the UART pins, as this may damage the device.
Q4: Does it support digital video?
A: Hindi. This is an analog video receiver supporting PAL and NTSC formats only.
Q5: Anong power supply ang kinakailangan?
A: The device supports a wide input range of 7–36V DC, katugma sa mga baterya ng 2S -6S lipo.
Q6: Is it compatible with standard FPV cameras?
A: Oo, as long as the camera outputs analog PAL or NTSC video signals.
Q7: Do I need to install an antenna before use?
A: Oo. Always connect the antenna before powering on the device to avoid damage.
Q8: Can it be used without the enclosure?
A: Oo, but removing the enclosure may affect heat dissipation and slightly reduce performance under high load.
Q9: Anong uri ng konektor ng antena ang ginagamit nito?
A: It uses a standard SMA male connector.
Q10: Is this suitable for long-range applications?
A: Oo. With -96dBm sensitivity and proper antenna selection, it performs well in long-range scenarios.
Pangwakas na Salita
The Ultra-Wideband FPV Video Receiver is a powerful, nabaluktot, and highly customizable solution for modern FPV and RF applications. With its unmatched frequency range, UART programmability, at compact na disenyo, it stands out as a versatile tool for both professionals and enthusiasts.
Whether you are building drones, testing RF systems, or developing new wireless video technologies, this receiver provides the performance and adaptability you need.
Mga review
May mga walang review pa.