60KM TDD Video and data integration users manual

version history

data	Bertsio	Modify the description
20230612	V1.0	initial version

Table of contents

version history 2

1. Product Overview 4

2. Product indicators 4

3. Product size and weight 5

3.1 Dimension Diagram 5

3.2 Dimensions and Weight 5

4. Product interface definition 6

4.1 Interface Diagram 6

4.2 Interface Definition 6

5. The meaning of the product status light 7

1. Product Overview

W1400-33-SMA is a self-developed TDD two-way video data integration medium and long-distance wireless image transmission equipment. product has Real-time interference detection, maiztasun egokitzeko aukeraketa, adaptive code stream and automatic power control, And other functions, greatly improving the ability of anti-multipath and anti-jamming. Momentu berean, it also has the characteristics of high reliability, egonkortasun ona, eta atzerapen txikia. This product uses Dual network ports, three serial ports, and other multi-interface designs. To a greater extent, it meets the diverse and multi-functional needs of customers in the fields of drones, suteen babesa, ikuskapena, jarraipena, and many other application scenarios. The maximum transmission distance in the case of a good air-to-ground line of sight in a good environment 60KM. To meet the needs of customers for medium and long distances.

2. Product indicators

Table 1: W1400-33-SMA technical specification list
System parameters	technical indicators
Device model	W1400-33-SMA
device name	TDD two-way wireless image data integrated equipment
Lan maiztasuna	1350~1470MHz
RF channel	2T&2R
transmititu power	1.7W/32dBm
transmisioa distantzia	Air-to-ground 60KM (common vision)
channel bandwidth	10MHz
Modulazio	QPSK/16QAM
Receiver sensitivity	see table 2
maximum rate	17Mbps@16QAM3/4
transmission delay	One-way 10ms
RF interfazea	SMA x2
device interface	Network port x2
	TTL/RS232 x2
	RS-422 x1
communication encryption	Scrambling encryption
Overall power consumption	≤ 24W air terminal
	≤ 10W ground terminal
Produktuen Tamaina	148x65x17mm
product weight	214g
Tentsio eragileak	DC 9~26V, typical value +12V@3A
tenperatura eragileak	-40~+85℃

Table 2 MCS and sensitivity (10MHz banda zabalera)
serie zenbakia	MCS	Total uplink and downlink throughput (Mbps)	sentikortasuna (dBm)
1	QPSK1/3	4.1	-99
2	QPSK1/2	6.0	-97
3	QPSK2/3	7.3	-96
4	QPSK3/4	8.4	-95
5	16QAM1/3	8.2	-94
6	16QAM1/2	12.0	-93
7	16QAM2/3	14.7	-91
8	16QAM3/4	16.9	-90

3. Product size and weight

3.1 Dimension diagram

3.2 Dimensions and Weight

• Size 148mm*65mm*17mm (including SMA 10mm)
• The weight of the whole machine is about 214g

4. Product interface definition

4.1 Interface Diagram

The interface of W1400-33-SMA equipment adopts J30J-25pin, and the interface has 1 energia hornidura, 2 serieko ataka, 1 RS-422, eta 2 sare-portuak.

4.2 Interfazearen definizioa

serie zenbakia	Pin izena	Interfazearen definizioa	Interface Description	signal direction
1	PWR	energia hornidura DC 9~26V	Positive power supply	I
2	PWR		Positive power supply	I
3	GND		The negative pole of power supply	I
4	GND		The negative pole of the power supply	I
5	422A	serial port 3RS-422	Receive data RX+	I
6	422B		Receive data RX-	I
7	422Z		Send data TX-	The
8	422eta		Send data TX+	The
9	TXD_A	serial port 1RS232/TTL	Send data TX	The
10	RXD_A		Receive data RX	I
11	TXD_B	serial port 2RS232/TTL	Send data TX	The
12	RXD_B		Receive data RX	I
13	GND		serieko ataka 2 ground wire	The
14~16	IO1~3	*reserved*	*reserved*	IO
17	TX1P+	Network ataka 1	Send data TX+	The
18	TX1M-		Send data TX-	The
19	RX1P+		Receive data RX+	I
20	RX1M-		Receive data RX-	I
21	GND	grounding	serieko ataka 1 ground wire	The
22	TX2P+	Network ataka 2	Send data TX+	The
23	TX2M-		Send data TX-	The
24	RX2P+		Receive data RX+	I
25	RX2M-		Receive data RX-	I

Ohar: Please confirm whether the serial port level of the device is TTL level or RS232 level.

5. The meaning of the product status light

Power light PWR (berdea)

When the PWR light is on, it means the device is powered on.

Synchronization light SYNC (berdea)

In the unsynchronized state, the light flashes. After synchronization, the light is always on.

Network port lights LAN1, 2 (berdea)

When the network port has data to send and receive, the network port light flashes.

Receive signal energy light (RSSI 3 green lights)

The more the energy lights are on, the stronger the signal-receiving strength is.

The RSSI light represents the received signal strength
The number of RSSI energy lights on	Received energy dBm
3 RSSI lights are all on	-45dBm or so
2 RSSI lights are on	-80dBm or so
1 RSSI light is on	-95dBm or so

module type	eredu	W1400-33-SMA series indicator status
		PWR light	SYNC lights	LAN 12 lights	RSSI 123 lights
host	not synchronized	Always on when powered on	keinuka	Data sending and receiving, keinuka	wipe out
host	after synchronization	Always on when powered on	always on	Data sending and receiving, keinuka	Proportional to received signal strength
tik	not synchronized	Always on when powered on	keinuka	Data sending and receiving, keinuka	search status
tik	after synchronization	Always on when powered on	always on	Data sending and receiving, keinuka	Proportional to received signal strength

When the master and slave devices are not successfully paired, the power PWR lights of the master and slave devices are always on, the SYNC lights are flashing, and the RSSI lights of the master device are all off. The RSSI of the slave device will always be in the search state. After the master and slave are synchronized, the SYNC light of the master and slave is always on. The master and slave RSSI lights show the received signal energy strength. When the network port is sending and receiving data, the corresponding LAN1 and 2 lights of the master and slave devices will flash correspondingly.