DVB-T2 ASI modulator-demodulator module with Ethernet UDP TS stream output
Sisukord
DVB-T2 ASI modulation Module with ASI TS stream input and RF output
DVB-T2 ASI Module Interface, mõõdud, Signal Definitions
Control serial port level: RS232 level, Module controls serial port, toiteallikas, andmete jadaport
DVB-T2 ASI modulator Module electrical characteristics
DC power supply, voltage 10V~20V
Recommendation: The supply voltage is 12V, and the current is less than 800mA
DVB-T2 ASI modulator Module Technical parameters
RF output power -15 +3 dBm (less than 1GHz, greater than 1G, requires actual measurement).
Shoulder not less than 50dB
DVB-T2 ASI modulator Module parameters and configuration software
The software configuration interface is shown below
DVB-T2 ASI Demodulation Module with RJ45 ethernet UDP output
DVB-T2 ASI Demodulation Module Feature
- Modular. Consists of a mainboard and a control panel.
- Madal energiatarve. 12V, 180mA
- High receiving sensitivity. Can reach -106dBm
- Kahe antenni mitmekesine vastuvõtt. Bandwidth from 5MHz to 8MHz, step 1M, frequency 100MHz to 860MHz.
- ASI TS stream output
DVB-T2 ASI Demodulation Module function
- Parameters of the communication control serial port
- 8-natuke andmebitt
- 1-natuke stop natuke
- Even parity
- boodikiirus: 19200
- 47 channels can be saved
Module interface, suurus, signal definition
Mainboard size: 40mmX70mm
Arvustused
Puuduvad ülevaateid veel.