Demodulation Module with TS stream output DVB-T DVB-t2 Siano chipset SMS4470
Enhavtabelo
apliko
- Uzita por evoluigi personecigitajn DVB-T DVB-T2-ciferecajn televidajn ricevilojn.
- Uzita por evoluigi personecigitan cofdm sendratan videotranssendon ricevilon.
Trajtoj
- Estas SMS4470 demodulado pecetaro
- 4 komputilaj demodulado pecetaro por subteni altnivelan agadon
- Dezajno de agordilo de diverseco
Aranĝo
pinglo Difini
2. GND | 4.I2C_SDA | 6. SYNC | 8.TS_D6 | 10.TS_D4 | 12.TS_D2 | 14.TS_D0 | 16.TS_ERROR | 18.VCC_1.8V | 20.VCC_3.3V | 22. GND | 24. GND |
1. RESET | 3.I2C_SCK | 5. VALIDA | 7.TS_D7 | 9.TS_D5 | 11.TS_D3 | 13.TS_D1 | 15.TS_CLK | 17.VCC_5V | 19.VCC_3.3V | 21. GND | 23. GND |
1. RESET
2. GND
3. I2C_SCK
4. I2C_SDA
5. VALIDA
6. SYNC
7. TS_D7
8. TS_D6
9. TS_D5
10. TS_D4
11. TS_D3
12. TS_D2
13. TS_D1
14. TS_D0
15. TS_CLK
16. TS_ERROR
17. VCC_5V
18. VCC_1.8V
19. VCC_3.3V
20. VCC_3.3V
21. GND
22. GND
23. GND
24. GND
Modulo de demodulado + Estraro de Demoder Carrier
Bezonas kompletan specimenon kun la tabulo de la malĉifrilo portanto?
Oftaj Demandoj
Q: We want to be able to program the SMS4470 directly without going through your motherboard, Ni uzos RASPBERRY PI por agordi la frekvencojn, legi la ricevnivelojn de DVB-T, kaj montru ilin sur LCD-ekrano.
A: Dankon pro via demando, kaj nia inĝeniero respondis, ke blato povas funkcii normale, ĝi bezonas periferian cirkvitan aparataron subtenon. According to your needs, vi ankaŭ bezonas malgrandan tabulon de aparataro por elkonduki la enigajn kaj eligajn havenojn de la blato. En la fino, kutima evoluo estas postulata. La nuna modulo jam havas tian funkcion. La inĝeniero rekomendas, ke vi unue aĉetu specimenon kaj provu konekti ĝin al via aparataro por vidi kiel ĝi funkcias. Ni povas provizi respondan helpon laŭ la specifaj teknikaj problemoj, kiujn vi renkontas.
SMS4470-pecetaro nur subtenas I2C por legi kaj skribi. For more information please visit siano.tv
Q: Can I buy this DVB-T demodulation module for testing?
A: Certe.
Please note this module can not work well independently. It cannot work with electricity if you only buy one module. Unless you produced the peripheral circuit yourself. If you buy our finished commercial products they can be electrified and tested when you take them back. Then take it apart and choose the module you want, and then develop it
For sample testing, please choose this completed commercial product, which is using this demodulation module. https://ivcan.com/p/dvb-t-cofdm-receiver-900-902-928-930mhz/
Q: I want to develop a hand-hold COFDM DVB-T receiver with a screen for wireless video transmission.
We already have the mini board for a similar project, please check the below pictures, maybe our trial complete set board will save your development time and cost.
This set of accessories includes a DVB-T motherboard, demodulation tuner + small LCD screen + keypad.
Tiel, you don’t need debugging software and can use the whole set directly. You only need to put this set of products inside your receiver shell.
Demodulator Tuner with motherboard (for power and decoder)