Inhaltsverzeichnis
30W-2115M power amplifier specification
Testgegenstände | Anforderungen an den Indikator |
Arbeitsfrequenz (MHz) | 2100~2130 |
Ausgangsleistung(W) | 30 |
In-Band-Gruppenverzögerungs (ns) | ≤50 |
Gewinnen(dB) | 55± 1,0 (kann angepasst werden) |
Eingangspegel(dBm) | -10 |
In-Band-Schwankung (dB) | ≤1,0 (Spitze-zu-Spitze-Wert) |
Gewinnen Sie Veränderung (-20~ + 70 ℃) (dB) | ≤±1,0 |
voltage standing wave ratio | ≤1,35 |
Belt to shoulder ratio (dBc)±4.2MHz | ≤-30 |
Stromversorgung Anforderungen | ≤+28 Vdc 30W/4.5A |
Arbeitstemperatur | -25~ + 65 ℃ |
RF-Schnittstelle | SMA-50KFD |
Modulvolumen (Millimeter) | 150×107×23mm |
FAQ
Q: Can you produce a 1 Ghz to 1.5GHz 25-watt power amplifier? (1000Mhz to 1500Mhz)
Our Requirement as below.
L Band Amplifier we have the below requirements.
Frequecy Range- 1 Ghz to 1.5GHz
RF Output – 25w
Modulation – COFDM
Operating Voltage – 28VDC
RF Input – 10 dBm
Type Class A Linear Amplifier.
Signal type Needed —COFDM
.Freq. Range –1000Mhz to 1500 Mhz
Input signal level—-0dbm to 10dbm
output power—25 watt@ COFDM Modulation
Input DC supply—-28v DC size of the amplifier should be as compact as possible.INPUT/OUTPUT RF connectors SMA Female
EIN: 1000Mhz to 1500Mhz is too wide for us. Our power amplifier frequency range max supports 60 MHz. Other demands are no problem.