How to use VSPlayer to play UDP stream video on RV1126
Table of Contents
How to use:
Open URL: rtsp://admin:admin@1192.168.31.88/live/main_stream (replace the IP with the IP of the board, and select UDP as the protocol)
rtsp://admin:admin@192.168.31.88/live/main_stream
Use vsplayer on the RV1126 development board to play the video stream through udp protocol. There is no need to type and follow the port number at the RTSP address. It’s a little different from vlc player streaming.
Configure hardware decoding;
right-click->Properties->Enable network stream hard decoding.
If your resolution is large, the delay will increase accordingly.
VSplayer Download
https://drive.google.com/file/d/18mfl5c95b95TdnR4GvXYvLxq0cE1xJPZ/view?usp=drive_link
VSplayer vs Easyplayer
Why is it not recommended to use Easyplayer on the RV1126 development board to play UDP video streams?
In previous tests, we found that the player easyPlayer may forcibly interrupt the process when it is closed, and the player compatibility is not good.