- Certification: AYIKHO
- Umsuka: CN(Umsuka)
- I-Rear Side Shell Material: Abs
- I-Rear Side Shell Material: plastic
- Power: max: 50MA, 12V.
- Isignali yesistimu: PAL / NTSC
Imisebenzi:
-
1. Ukubuka kwangaphambili okuzenzakalelayo lapho ugqolozele:
Lapho injini iqala, uhlelo lusebenza umshini wokuqapha kanye nekhamera yangaphambili ukuhlola umbono wangaphambili 8 imizuzwana bese uyayicisha.
- 2. Ukubuka kwangemuva okuzenzakalelayo:
- 3. Ukubuka kwangaphambili kuhlala kwenza imodi isebenze:
Cindezela inkinobho yokulawula ukuze ungene kumodi yangaphambili.
Kule modi, uhlelo luzoqapha futhi luvule ingaphambili lekhamera ngaso sonke isikhathi.
Phuma kumodi ngokucindezela inkinobho yokulawula futhi.
Ukusebenza kuqala: Ukubuka emuva > Ngaphambili
Ikhamera yokubuka yangaphambili: eyethulwa uhlelo lwesilawuli kude.
Ikhamera yokubuka ngemuva: ihanjiswe isistimu yokulawula noma ingenziwa isebenze ngokuhlehla.
Ukucaciswa:
-
Power: max: 50MA, 12V.
-
Isignali yesistimu: PAL / NTSC
-
okukhipha Isiqophi: 1.0VPP / 75Oh
-
izinga lokusebenza: -20℃ ukuya ku-80 ℃
Iphakheji Kuhlanganisa:
-
1 x Uhlelo Lokulawula Ikhamera Yokupaka
-
Test Video at Youtube
https://youtube.com/shorts/8OY5o8SGN8Q
FAQ
umbuzo 1: This box gets Acc dc 12v, GND…if I connect a front and a rear camera, how do they get Acc dc 12v, GND? For example front gets it from the box front input and the Acc DC 12v from the red cable, and how is GND? It may be included in the yellow Front input. Or I’m completely wrong and I have to connect separately for the front and rear camera their own Acc dc 12v, GND!?
impendulo: The GND wire of the camera can be connected to the GND wire of the car lights or any wire that is drawn from the black wire of the battery, and can be connected anywhere on the car. The GND wires on the car are all connected together.