150km 200km alailowaya data gbigbe transceiver telemetry laisi fidio

150km 200km alailowaya data gbigbe telemetry transceiver Data Link

Redio oni-nọmba wa ni akọkọ lo fun gbigbe data ile-iṣẹ jijin-gigun agbara giga.
O ni iwọn kekere kan, ti o dara Integration, ati ki o ga ifamọ.
Ṣiṣẹ ni ipo igbohunsafẹfẹ 902 ~ 928MHz.
Awọn ijinna gbigbe ni atilẹyin 100km ati 200km, lẹsẹsẹ.

Awọn ẹya ara ẹrọ

igbohunsafẹfẹ ibiti o: 902-928MHz
Itankale julọ.Oniranran ọna: Awoṣe yii jẹ apẹrẹ fun fidio ati gbigbe data alailowaya pẹlu ọna asopọ data alailowaya ọna meji
Data ìsekóòdù: 256-bit ti ara Layer ìsekóòdù
Iwọn ibaraẹnisọrọ: to 100km / 200km
o wu agbara: 10W (40dBm)
Air ni wiwo oṣuwọn: soke si 276.4kbps
Serial ibudo baud oṣuwọn: soke si 921.6kbps
ṣiṣisẹ liLohun: -40°C si 85°C

Specification

ṣiṣẹ otutu: -40℃ ~+85℃

Awọn ilana fun gbigbe ohun ibere

Tẹlentẹle ibudo ni TTL tabi RS232

Kini oṣuwọn baud nilo lati ṣeto

olugba Eriali

Ni package aiyipada, àwa yóò rán yín 2 pcs eriali omnidirectional fun atagba ati olugba. Ti ibiti gbigbe rẹ ba kọja 100km, o dara lati yi eriali itọnisọna pada si olugba ilẹ ati gbiyanju lati fi sori ẹrọ ni giga bi o ti ṣee.

 

1. Ṣe gbigbe data alailowaya rẹ ṣe atilẹyin Pixhawk autopilot? Can it send data/video? What is the frequency?

1. Support Pixhawk autopilot.
2. Can send rand receiver the data, but no video, if need data+video, Jọwọ šayẹwo TX900
3. The working frequency is from 902Mhz to 928Mhz.

2. Does the antenna is omnidirectional or directional?

1. A small antenna in the air unit is omnidirectional, pẹlu.
2. A big antenna in the ground unit, it is better to use a directional antenna, ko pẹlu.

3. Ti mo ba ra 3 units, can we control 2 drones at the same time, switching between them?

1. Our wireless data transmission supports multi-point-to-point networking, and one ground unit can control multiple drones.

4. What should I do if I lost one unit? (the transmitter with the drone has lost)

1. You should buy a new one and pair them.

5. Are they full-duplex and RS232 port?

1. bẹẹni, it is full-duplex.
2. We can customize the data port to RS232 if you need.

6. If I change the Baud rate from 57600 to 115200, will this affect distance or data?

1. It doesn't matter if the serial port baud rate is changed to 115200, but the corresponding serial port baud rate of the flight controller must also be changed to 115200.
2. Dajudaju, you can also change the serial port baud rate to 57600. The biggest impact is that the flight control may increase the amount of data as the serial port baud rate increases. This is the only impact.

7. What is the power supply and power pin define?

1. 10-watts Power Amplifier model needs 24V power supply

Software Iṣeto ni

download https://drive.google.com/file/d/1ACNyk_xsgtlLXPBPTWp-qpyqPjGk8UQT/view?usp=drive_link

Awọn olumulo Afowoyi

Users Manual online (HTML)

Users Manual online (PDF)