Disclaimer
- Please read the user’s manual carefully before use. Be sure to pay attention to the warnings and understand all points completely.
- Please strictly abide by the local radio frequency management regulations.
- Please follow the installation steps in the manual to use this product. Our company and agent will not take legal responsibility for the damage of equipment or personnel caused by the installation and modification of users.
- This copyright of this manual belongs to Great Mainlink Tech Co., LTD. No one may make copies without written consent.
احتیاط
Attention to installation
1. Before power on, make sure the antenna connection is reliably . ورنہ, it will cause damage to the device.
2. Make sure that the voltage is within the range of use.
3. Please pay attention to the EMC of all the electronic equipments on your drone.
4. It is recommended that the antenna should be installed downward and keep the antenna away from the metal on the drone.
5. Make sure to use the matching antenna.
Before use
1. Make sure that all cables are connected correctly and firmly.
2. No foreign objects (مثلا. liquids, sand, وغیرہ) can be entered inside the device.
3. It takes 15 seconds for the device to start. Video and data cannot be transferred until the device has finished booting.
4. Please ensure that the environment in which the equipment is used is free of other electromagnetic interference.
5. When the signal weakens, you can improve the effect by changing the heading direction of the antenna.
پیکنگ کی فہرست
Device X 2
جائزہ
Industry drone market is developing very fast in recent years. The fight time and distance of drones are getting longer and longer. MK22/MK55, a long-range wireless transmission system, is designed for VTOL fixed wing and other long-range drones. The system can transmit video, fight control data, جیمبل کنٹرول ڈیٹا, and RC data simultaneously. With the advantage of high level intergration and powerful function, MK22/MK55 is a typical good product to meet long-range transmission requirements.
There are two frequency bands——800MHz、1.4GHz and 2.4GHz. Users can choose according to their needs. Please choose the suitable frequency band according to local regulations.
MK22 can transmit data and video to 22km, MK55 can transmit data and video to 55km, making it very suitable for long range drone.
If you use our recommend ground station, you only need one cable with connector to connect the device and your ground station.
*1Test under LOS and no interference conditions。
خصوصیات
Long distance Modulation
-MK22 Up to 22km @ LOS – OFDM
-MK55 Up to 55km @ LOS
Video interface Data interface
– Ethernet *1 – UART(TTL/RS232)/SBUS,
Hopping/Fixed Frequency فریکوئنسی بینڈ
-Fixed: user defined – 800MHz/1.4GHz/2.4GHz
-Hopping: خود کار طریقے سے Working mode
BW – Air unit can be :Point to point mode
-5/10/20 MHz Repeater mode
کام کا درجہ حرارت Power range
– 40℃~+70℃ – DC 9~28V Battery 3S~6S
M52 Interface Description
Air unit
side view
ایتھرنیٹ
نمبر | Character | تفصیل | Input/Output |
1 | T+ | TX+ | O |
2 | ٹی- | TX- | O |
3 | R+ | RX+ | میں |
4 | R- | RX- | میں |
2. UART1
نمبر | Character | تفصیل | Input/Output |
1 | جی | GND | I / O |
2 | R | RS232 RX | میں |
3 | ٹی | RS232 TX | O |
3. UART2
نمبر | Character | تفصیل | Input/Output |
1 | جی | GND | O |
2 | R | TTL RX | میں |
3 | ٹی | TTL TX | O |
4. پاور
نمبر | Character | تفصیل | Input/Output |
1 | جی | GND | I / O |
2 | V | +Vcc(9v~28v) | میں |
5. SBUS1
نمبر | Character | تفصیل | Input/Output |
1 | ایس | SBUS OUT | O |
2 | V | +5v(I max 1A) | O |
3 | جی | GND | I / O |
6. SBUS2
نمبر | Character | تفصیل | Input/Output |
1 | ایس | SBUS OUT | O |
2 | V | +5v(I max 1A) | O |
3 | جی | GND | I / O |
7. طاقت کے اشارے
This indicator is solid green when air unit is booting.
8. لنک اشارے
LED Pattern Description |
solid green Wireless link is established |
light off Wireless link is lost |
9. Status Indicator
LED Pattern(Blink only in booting) Description |
Blink 2 times Initialization OK, Frequency is 1.4GBlink 1 time Initialization OK, Frequency is 800M |
Blink 3 times Switch mode (Swith from air to ground, vice verse) |
Blink slow all the time Enter configuration mode |
Blink fast all the time Device abnormal |
10. SMA antenna connector.
- Fiber glass antenna.
- OLED display.
- بیٹری
- رابط.
نمبر | تفصیل | Input/Output |
1 | Rx+ | میں |
2 | RX- | میں |
3 | Tx+ | O |
4 | Tx- | O |
5 | UART1 TX (RS232) | O |
6 | UART1 RX (RS232) | میں |
7 | UART2 TX (RS232) | O |
8 | UART2 RX (RS232) | میں |
9 | NC | |
10 | RC1_IN | میں |
11 | RC2_IN | میں |
12 | +5v | O |
13 | GND | I / O |
14 | GND | I / O |
15 | GND | I / O |
16 | GND | I / O |
17 | GND | I / O |
18 | GND | I / O |
19 | VCC (9v~28v) | میں |
20 | VCC (9v~28v) | میں |
تفصیلات
قسم | آئٹم | تفصیل |
وائرلیسکارکردگی | فریکوئنسی بینڈ | 800MHz/1.4GHz۔ |
احاطہ ارتعاش | 800میگاہرٹز:806MHz~825MHz1.4GHz:1427MHz~1447MHz2.4GHz: 2400~2480MHz | |
Band width | 5MHz/10MHz/20MHz | |
ماڈلن | OFDM | |
EIRP | MK22: 30dBm±1dBMK55: 33میں dBm ± 1dB | |
حساسیت | 95-95dBm | |
رینج | MK22: 22کلومیٹرMK55:55کلومیٹر*1 | |
بٹ ریٹ | 30یمبیپیایس @ 20MHz | |
پاور رینج | ڈی سی 9 ~ 28V | |
طاقت کا استعمال | ≤8.5W | |
انٹرفیس | انٹینا | ہائی سکول *2 |
پاور | XT30 | |
UART | ٹی ٹی ایل 3.3 وی,1 آغاز بٹ, 8 ڈیٹا بٹ, 1 سٹاپ بٹ, کوئی برابری نہیں., بود شرح 115200 (پہلے سے طے شدہ),57600, 38400, 19200, 9600 | |
UART1 اور UART2۔ | ||
ایس بی یو ایس۔ | SBUS_IN۔ | |
SBUS_OUT | ||
ایتھرنیٹ | 4 پن | |
بٹن | 1 | |
سوئچ کریں۔ | ہوا اور زمینی سوئچ کے لیے۔ | |
انٹینا | انٹرفیس | ہائی سکول |
قسم | ہوا۔:Glue stick antenna 20cmGround:Fiber glass antenna, penal antenna | |
بروویکرن قسم | عمودی | |
حاصل کرنا | ہوا۔:2.5dBiGround:12DBI | |
SWR | ≤2.0 | |
ماحولیات | کام کا درجہ حرارت | -40℃ ~ 70 ℃ |
ذخیرہ اندوزی کا درجہ حرارت | -40℃ ~ 85 ℃ | |
نمی | 5~ 95٪,غیر گاڑھا ہونا | |
ظہور | سائز | 112 ایکس 63.5 ایکس 19 ملی میٹر |
وزن | 143جی |