Kablosuz geniş bant SDR özel ağ modülü
Kablosuz geniş bant SDR ad hoc ağ modülü iki yönlü video, ses, veri şeffaf iletim
![Kablosuz geniş bant SDR ad hoc ağ modülü iki yönlü videoidsess veri şeffaf iletim Wireless broadband SDR ad hoc network module two-way video audio data transparent transmission](https://i0.wp.com/ivcan.com/wp-content/uploads/2023/05/Wireless-broadband-SDR-ad-hoc-network-module-two-way-video-audio-data-transparent-transmission.webp?resize=1020%2C1020&ssl=1)
İçindekiler
avantaj
![Kablosuz geniş bant SDR ad hoc ağ modülü iki yönlü videoy�ses vveri şeffaf iletimtimi IP mesh Wireless broadband SDR ad hoc network module two-way video audio data transparent transmission](https://i0.wp.com/ivcan.com/wp-content/uploads/2023/05/IP-mesh-Wireless-broadband-SDR-ad-hoc-network-module-two-way-video-audio-data-transparent-transmission.webp?resize=889%2C515&ssl=1)
① Özel radyo frekansı 1
② Özel radyo frekansı 2
③ DC 12V giriş/ağ bağlantı noktası
④ RS232/ses (Seç 1 itibaren 2)
⑤ Güç anahtarı
⑥ GPS Beidou/WIFI (Seç 1 itibaren 2)
⑦ Güç Göstergesi
⑧ Özel ağ göstergesi
Özellikler
- Merkezi yok edilmeyi önleyen ağ yapısı yok: Herhangi bir düğümün ayrılması veya hasar görmesi, genel ağın çalışmasını etkilemez
- Çoklu iş verileri: Destek videosu, ses, konum, sensör, ve diğer IP tabanlı veri iletimi
- Çoklu erişim yöntemleri: Ethernet bağlantı noktasını destekleyin, and serial port, can support the transmission of control commands and video data at the same time
- Güçlü anti-parazit yeteneği: Support automatic spectrum migration and frequency hopping working mode
- Kompakt boyut: Size 133×66×33mm; Weight 400g
şartname
![Kablosuz geniş bant SDR ad hoc ağ modülü iki yönlü video, ses, veri şeffaf iletim 8 Wireless broadband SDR ad hoc network module two-way video, voice, data transparent transmission](https://i0.wp.com/ivcan.com/wp-content/uploads/2023/05/Wireless-broadband-SDR-ad-hoc-network-module-two-way-video-voice-data-transparent-transmission.webp?resize=1000%2C1000&ssl=1)
Paket dahil
(1). One ad hoc network host
(2). 2 dedicated frequency band (1.4ghz) antenler (depending on different models, other types of antennas are optional)
(3). Common frequency band (2.4Ghz/GPS Beidou) anten (Seç 1 itibaren 2)
(4). Power supply/network port conversion cable 1 parça
(5). Voice/RS232 transfer cable 1 (Seç 1 itibaren 2)
(6). DC 12V adapter 1pc
Kurulum adımları
1. Install the antenna: connect the dedicated frequency band antenna (or feeder) to the TNC head (RF1/RF2), press and rotate to fix it, and ensure that the antenna is tightened and not loose;
2. Install the power supply/network port conversion cable: connect the aviation plug (2 cores) to the main engine aviation seat, and then tighten the nut to ensure good contact.
Önyükleme adımları
- Press the switch, turn on the power, the indicator light of the power switch is on, and the system starts self-test (It is forbidden to turn on the power without connecting the antenna, and it is forbidden to use other types of adapters)
- After the self-inspection is completed after the neighbor node is found, the self-organizing network indicator is always on, indicating that the network is successfully established
Ağ oluşturma
The networking indicator light indicates the status of being in the network or being disconnected from the network. When the indicator light is on, it indicates that the network has been established. Green indicates that the network quality with neighboring nodes is good, orange indicates normal, and red indicates poor quality.
seri numarası | durum | meaning |
1 | light off | offline |
2 | green steady | good network quality |
3 | Orange is always on | Average network quality |
4 | Steady red | poor network quality |
Önlemler
- Make sure the antenna is tightened;
- Keep the antenna vertical to the ground during the test;
- Do not touch the antenna with your hands or other objects during the test;
- It is not advisable to get too close to each other between devices, and they should be separated by more than 5M;
- If there are test conditions, choose a commanding height to erect one of the nodes;
- Check whether the communication link is normal through the network indicator light, and the network indicator light is always on, indicating that the link layer has been successfully connected;
- Check the environmental noise situation through the WEB interface to know whether there is co-channel interference around;
- hakkında 5 seconds after the networking is successful, you can check the network connectivity of each node through the ping packet;
- Make sure that the cameras, PC'ler, and other devices that need to be connected are in the same IP address segment, and can communicate normally under the condition of a wired connection, without using the same address segment of NexFi devices (NexFi cihazları MAC adresleri aracılığıyla iletişim kurar);
- Trafik akışı, insanlar akışı, binalar, ve ağaçların iletişim kalitesi üzerinde değişen derecelerde etkisi olacaktır.;
- Binanın içinde ve dışında penetrasyon testleri yapılırken, harici düğümler binaya çok yakın olmamalıdır, ve mesafe 10M'den fazla olmalıdır;
- Daha uzun bir test mesafesi elde etmeniz gerekiyorsa, yönetim arayüzü aracılığıyla bant genişliğini 5MHz'e ayarlayabilirsiniz, ve daha büyük bir bant genişliği elde etmeniz gerekiyorsa, 20Mhz'e ayarlayabilirsiniz;
- Video aktarımı için kullanılıyorsa, videonun donmasını önlemek için, kamera çözünürlüğünü ayarlayarak video efektini optimize edebilirsiniz, kare hızı, kod dönüştürme akışı, ve diğer parametreler;
- Açık havada gündüz ve gece testleri için kullanılıyorsa, lütfen su geçirmez önlemler alın ve iyi ısı dağılımı teması sağlayın.