Standalone video encoder for CVBS video input and compressed data output in PCM (CLK + маълумот) формат
Мундариҷа
I saw your product on the website. I want to ask if you have a standalone video encoder for CVBS video input and compressed data output in PCM (CLK + маълумот) формат:
Ташаккур барои пурсиши шумо. Our devices mostly output HDMI,
Do you have any details of this requirement?
The requirement is 1) вуруди: analog video, 2) Компрессия: H.264 or JPEG2000, 3) Натиҷаи: Pulse Coded Modulation (соат + маълумот) in RS422 format, 4) Small form factor and lightweight
Do you need the PCBA Or a Complete device?
The complete device is preferred but PCB is also acceptable
The serial data rate is 7-10Mbps, is it acceptable?
Required is configurable from 1 Mbps – 10 Мб
And this is only an encoder, do you have a decoder? So you just need an encoder or a pair from us?
Pair is preferred but if the decoder is not available we would like the encoder to be compatible for software decoding options e.g. VLC for h.264, open jpeg for jpeg2000
What is the detailed requirement of your video encoder card?
The product is a video codec board for airborne applications, supporting professional video formats, and adaptable to a wide range of operational requirements. The compact housing is resistant to difficult environments and is adapted to airborne and terrestrial applications.
The product uses a wavelet, intra-frame compression technique to provide low latency and high robustness against transmission errors. Highly configurable, it can be used in a wide range of operational conditions
Serial No. Parameter Specifications
1. вуруди Видео: BNC or SMA
2. Video Input Standard: SD Analog (Пал)
3. Number of video inputs: 1
4. Video frame rate (User configurable): 5 ба 25 images/second
5. Output Bit rate (User configurable): Аз 1 Mbps to 16 Мб
6. Compressed data format (User configurable): RS-422, TTL
7. Compressed data interface: соат + маълумот
8. Интерфейси конфигуратсия: RS232 (2400 ба 115200 bps)
9. Digital Connector: Micro-D 25
10. Компрессия: JPEG2000 (Wavelet)
11. Compression CODEC compatibility: Openjpeg, J2K-Codec
12. Supply: 7VDC to 32VDC
13. ҳокимият: < 6 Ватт
14. Power Connector: Circular 4 пайвандак
15. Ҳарорат амалиётӣ: -40°C to +85°C
16. тарозу (with enclosure): < 500 gm
17. тарозу (without enclosure): < 150 gm
18. Environmental Airborne
Deliverables:
1. Encoder Unit
2. дастӣ корбар (Detailed instructions, Operating Procedure, and Configuration Procedure)
3. 12 Months Warranty
4. Mating connectors
Tests:
1. Functional
2. Thermal
3. Environmental
нест. 4, 9, 10, 11, now current PCBA solution doesn’t support, any replacement?
only supports hardware encoder and decoder, as this solution does not support ethernet connect output, so software decoder doesn’t support. RS422 nominal rate is 10Mbps but the actual rate is about 7Mbps
What about TTL?
only CMOS level