Analog FPV Video Transmitter and Receiver AHD CVBS Camera input 100Mhz-3.3G frequency

పరిచయం

This is a newly launched analog video transmission module.
It is a module with a small size, తక్కువ విద్యుత్ వినియోగం, and simple frequency matching.
This product processes analog video signals with continuously changing time (including space) and amplitude as a source and channel to meet the needs of different scenarios.

ఫీచర్

1. Multiple receivers can receive video signals at the same time\
2. తక్కువ అంతర్గతం, wide frequency, తక్కువ విద్యుత్ వినియోగం, low heat generation
3. Stable transmission efficiency
4. Simple frequency matching
5. చిన్న పరిమాణం (TX: 48mm x 32mm) (ఆర్ఎక్స్: 38mm x 28mm), తక్కువ విద్యుత్ వినియోగం
6. For simple frequency change, the starting frequency can be set through the serial port, ఇంకా 4 frequency points can be cycled by pressing the button
7. High image quality and low signal interference rate

స్పెసిఫికేషన్

1. Transmitter frequency range 100Mhz-3500Mhz (3.5G)
2. Receiver frequency range 100Mhz-3500Mhz (3.5G)
3. Default frequency range 400-900Mhz
4. Default power amplifier: 3-వాట్
5. Power supply 5V (not input 12V)
6. వీడియో ఇన్‌పుట్ మూలం: AHD / CVBS camera
7. Frequency selection method: one button (four frequency preset loops chosen)

ఎఫ్ ఎ క్యూ:

Q. Can you make the analog FPV transmitter and receiver have a relay/repeater?

ఒక: This is an analog model, there is no relay or repeater in the middle. If you need a relay or repeater for your FPV transmission system, please check the below model, which uses the COFDM digital transmission system, it can have a repeater. 3W PA 50KM