HDMI input to IP encoder web ui is a system for our HDMI video input transfer the IP living stream ethernet RJ45 output. The default IP address of our HDMI input to the IP encoder module board is http://192.168.1.30. If your computer can ping to this address successfully, Please open this IP address in the browser. You can view the current parameter configuration or modify it according to application needs.

tusi: To change any configuration parameters through the Web UI, the hardware system must be restarted for the changed configuration to take effect.

HDMI input to IP encoder web UI setting

1. Network Menu Page

Local IP: the default IP address of the HDMI input to IP encoder module board;

Remote IP: the IP address of the remote supporting decoding system delivered through the network. The video data encoded by the encoding board and the serial port data and audio data collected by the encoding board (the encoding board generally has a serial data port and an audio input interface) will be sent to the decoding system at the far end of the network through the Ethernet port. The serial port data of the encoding system will be transmitted to the serial port of the decoding board of the remote IP.

The remote IP setting is only available if you bought one pair of boards including the transmitter ma e faataapeina.

tāulaga: The port number to which the encoded data is sent through UDP (the port number configured on the decoder side should be the same as the port number configured on the encoder side).

Protocol: Configure the transport protocol used by the encoding system. By default, the UDP protocol minimizes the delay, and it supports and decodes the point-to-point UDP-TS stream transmission of video data between systems. The RTSP protocol supports the decoding end to perform RTSP on-demand (similar to the IP Camera method). Both mean that the video streaming is carried out with the UDP protocol and the RTSP protocol at the same time.

2. Video Menu Page

latency Low: low latency encoding mode option. Only when the H264 low-latency decoding system is connected (the corresponding decoding system is also set to “low latency”), Yes can be checked here. To connect to any other H265 and H264 decoding systems, check No here. (The low-latency attribute is only applicable to models that support low-latency codec, fa'amolemole fa'afeso'ota'i le kamupani mo fa'amatalaga).
H265: Afai e mana'omia H265 encoding (na'o fa'ata'ita'iga e lagolagoina H265 encoding, fa'amolemole fa'afeso'ota'i le kamupani mo fa'amatalaga), siaki Ioe iinei. Siaki Leai o lona uiga H264 decoding.
Bitrate: Vitio fa'ailoga le maualuga o le bitrate seti. 0 o lona uiga o le fa'aogaina o le fa'aogaina o le system (o le faiga fa'aoga vitiō e fa'aogaina ai le tele o vaitafe e 3.12Mbps).
GOP: Vitio encoding I fa'avaa seti vaeluaga, 0 o lona uiga o le seti tulaga faaletonu.

3. Itulau Menu leo

faalogologo:
on —- ki le galuega pu'e ma fa'ailoga leo;
off —- tape le fa'aogaina o le leo fa'aoga ma le fa'ailoga.
Aukuso: E mafai e le faiga o le encoding ona maua fa'amatalaga leo e lafo mai e le fa'aogaina mamao e ala i le feso'ota'iga mo le decoding ma le gaosiga.
Yes —-Enable audio decoding output;
No—-Disable audio decoding output function.
Aine:
Auto—-The system automatically captures audio from the current video input interface; faataitaiga, pe a o'o i le laina fa'aoga vitio o lo'o iai HDMI, filifili Auto e pu'e leo numera mai le fa'aoga HDMI; pe a o le alaleo fa'aoga vitio o lo'o i ai nei o le AV, filifili Auto e pu'e leo numera mai le fa'aoga HDMI. Pu'e leo analog mai le fa'aoga AV.
Anlg—-The system only captures analog audio from the AV interface.
tusi: Pe a mana'omia le lagolago leo fa'aliliu (e auina atu e le decoder vitio le leo i le encoder vitio), le fa'aoga leo (ain) e tatau ona fa'atulagaina i le tulaga Anlg.
Lin:
Mic —- Pu'e leo fa'atusa mai le fa'aoga AV ile Mic ile faiga. (Ole feso'ota'iga meafaigaluega ole faiga fa'ailoga e tatau fo'i ile Mic ile mode)
Lin —- Aoina mai le leo analog mai le fa'aoga AV ile Laina ile faiga. (Ole feso'ota'iga meafaigaluega ole faiga fa'ailoga e tatau fo'i ona iai ile laina ole faiga)

4. Itulau Menu Fa'asologa

O la matou HDMI i le IP encoding laupapa e tasi le fa'amaumauga fa'asologa. Pe a manaʻomia le tuʻuina atu o faʻamatalaga tau telefoni e aoina mai e le laupapa encoder i le telefoni faʻasolosolo tutusa o le laupapa decoder mamao e ala i le fesoʻotaʻiga., o fa'asologa o feso'ota'iga tau telefoni o lo'o fa'atulaga iinei. Afai e le'o fa'aogaina le taulaga fa'asologa o le laupapa fa'ailoga, o tulaga iinei e leai se aoga i isi galuega a le faiga.

Baud_Rate: Seti le paud rate o fa'amaumauga tau fa'asologa o le laupapa fa'ailoga.
Fa'atasi: Seti le faiga fa'atusa o fa'amaumauga tau fa'asologa o le laupapa fa'ailoga.
Leai/ese/E fetaui ma: leai se tutusa/tulaga tutusa/tulaga tutusa.
Max gap(MS): Seti le va o felauaiga aupito maualuga o fa'amaumauga tau telefoni (ina ia mautinoa le faatinoga o le taimi moni).
Max paketi: Seti le lapo'a maualuga o le pusa o fa'amaumauga tau telefoni (pe afai e fa'asalalauina e ala i se so'oga uaealesi, e tatau ona aloese mai le felauaiga IP afifi e tele tele).

5. RTSP Menu Itulau

Pe a fa'atulaga le fa'asologa o le fa'aogaina o le module e fa'aoga le Rtsp i le mea fa'aitu o le Network, e mafai ona e va'ai i le taimi moni ata vitio avanoa URL o le faiga encoding e ala i lenei itulau. Le RTSP Client (VLC, ma isi tulaga faapena) mafai ona maua le RTSP ata vitio o le faiga encoding e ala i lenei URL.
(Manatua o mataitusi tetele ma mataitusi laiti e le mafai ona sese)

6. Itulau Menu Fa'atonu

O lenei lisi e faʻaaogaina e siaki ai le software firmware version of the encoding board system ma faʻafouina le software firmware e ala i le Upega Tafaʻilagi.