150km 200km wireless data transmission telemetry transceiver Data Link
Our digital radio is mainly used for high-power long-distance industrial data transmission.
It has a small size, good integration, and high sensitivity.
Work in the 902~928MHz frequency band.
The transmission distances supported 100km and 200km, පිළිවෙලින්.
අන්තර්ගත වගුව
විශේෂාංග
සංඛ්යාත පරාසය: 902-928MHz වලින්
Spread spectrum method: මෙම ආකෘතිය ද්වි-මාර්ග රැහැන් රහිත දත්ත සබැඳියක් සහිත වීඩියෝ සහ දත්ත රැහැන් රහිත සම්ප්රේෂණය සඳහා නිර්මාණය කර ඇත
දත්ත සංකේතනය: 256-bit physical layer encryption
සන්නිවේදන පරාසය: up to 100km/200km
නිමැවුම් බලය: 10W (40dBm)
Air interface rate: up to 276.4kbps
Serial port baud rate: up to 921.6kbps
මෙහෙයුම් උෂ්ණත්වය: -40°C to 85°C
පිරිවිතර
Instructions for placing an order
Serial port is TTL or RS232
What baud rate needs to be set
ලබන්නා Antenna
At the default package, අපි ඔබව එවන්නෙමු 2 pcs omnidirectional antenna for the transmitter and receiver. If your transmission range is over 100km, it is better to change a directional antenna to the ground receiver and try to install it as high as possible.
නිතර අසන පැන
- Support Pixhawk autopilot.
- Can send rand receiver the data, but no video, if need data+video, කරුණාකර පරික්ෂා කරන්න TX900
- The working frequency is from 902Mhz to 928Mhz.
- A small antenna in the air unit is omnidirectional, ඇතුළුව.
- A big antenna in the ground unit, it is better to use a directional antenna, ඇතුළු නැහැ.
- Our wireless data transmission supports multi-point-to-point networking, and one ground unit can control multiple drones.
- You should buy a new one and pair them.
- ඔව්, it is full-duplex.
- We can customize the data port to RS232 if you need.
-
It doesn't matter if the serial port baud rate is changed to 115200, but the corresponding serial port baud rate of the flight controller must also be changed to 115200.
- ඇත්ත වශයෙන්, you can also change the serial port baud rate to 57600. The biggest impact is that the flight control may increase the amount of data as the serial port baud rate increases. This is the only impact.
-
10-watts Power Amplifier model needs 24V power supply
Configuration Tool Software
බාගත https://drive.google.com/file/d/1ACNyk_xsgtlLXPBPTWp-qpyqPjGk8UQT/view?usp=drive_link
පරිශීලක අත්පොත
Users Manual online (HTML)
Users Manual online (PDF)