Transmițător fără fir COFDM video HDMI
COFDM video wireless HDMI transmițător TX Transmisie HDMI HD 1080P CVBS H264 encoder COFDM-907T
Transmițătorul COFDM-907T este un dispozitiv de transmisie de date de mare viteză pentru aplicații de transmisie video și audio de înaltă calitate. În plus față de cerințele audio și video de înaltă calitate ale camerei, fluxul de codificare, and channel rate requirements are very high. Se poate transmite codec de înaltă calitate H.264, a receiver image resolution up to 1920X1080P/60.
Cuprins
Specificație
Codare | H.264, MPEG-2 |
Benzile de frecvență | 170Mhz ~ 930Mhz (frecvență reglabilă disponibile la cerere) |
Formatul de modulare | COFDM / DVB-T |
Putere de ieșire Amplificator | 1W 2W 5W 10W (Presetate în fabrică înainte de livrare |
Lățime de bandă de canal | 6MHz 7MHz 8MHz |
Modularea purtătoare subcod | QPSK, 16QAM, 64QAM |
Codul de eroare Rata | 1/2;2/3;3/4;5/6;7/8 |
Interval de Garda | 1/32,1/16,1/8,1/4 |
Cod flux video | 2Mbps ~ 22Mbps |
Sistem de latență | 300 milisecundă |
Gama de transmisii cerere |
raza vizuală Airborne utilizare aplicație maritimă urban Aplicație suburban Aplicație |
Format de compresie | H.264 / MPEG-2 |
Data de intrare | UART (115200bit / s) |
Video-intrare | HDMI, CVBS (video-audio) |
Intrare audio | Stereo, AL AR stânga dreapta |
Imagine Definiție | 1080P / I (1920 * 1080) 720P compatibil / I,576P / I,480P / I,SD( frame rate @ 25fram / S) |
Interfață de intrare video | 4P 1.25 interfață cablu panglică, Interfața HDMI standard |
Tensiune de intrare Interval | 10V ~ 35Vdc |
Temperatura de lucru | -20~ + 65 ℃ |
Depozitare | -40~ + 70 ℃ |
Dimensiune | 93mm x 56mm x 23mm(L × W × H) |
Unitate de bază Greutate | 80g (Cu ventilatorul) Inclusiv antena 138g |
LED-uri și Frecvență
LED-uri de culoare | Notă | Frecvență |
1 0 0 | 1st Green LED is always on, and tx is working; 2II și a 3-LED albastru este stins | 503Mhz |
1 1 0 | 1st Green LED is always on, and tx is working; 2nd cu LED albastru este aprins și a 3-LED albastru este stins | 509Mhz |
1 0 1 | 1st Green LED is always on, and tx is working; 2nd cu LED albastru este stins și a 3-LED albastru este pe | 515Mhz |
1 1 1 | 1st Green LED is always on, and tx is working; 2II și a 3-LED albastru este pe | 521Mhz |
TX Pin Definirea
(also note that you need this cable to have the UART TX RX function)
P1. Audio L
P2. Audio R
P3. Video
P4. GND
P5. Vcc
P6. GND
P7. TX
P8. RX
Galerie
COFDM HDMI Receptor COFDM-907r
Standard | DVB-T / DVB-T2 modulul Standarde COFDM cu diversitate 2 antenă | ||||
Formatul de modulare | COFDM / DVB-T | ||||
Tensiunea de alimentare | 12-24VDC | ||||
Gama de Frecventa | 170MHz ~ 930MHz (reglabil, și personalizate 2.4-5.8G disponibile la cerere dvs.) | ||||
Lățime de bandă de canal | 6MHz / 7MHz / 8MHz | ||||
Modularea purtătoare subcod | QPSK,16QAM,64QAM | ||||
Interval de Garda | 1/8, 1/4 | ||||
Codul de eroare Rata | 1/2;2/3;3/4;5/6;7/8 | ||||
Impedanta de intrare | 50Ω Dezechilibrat | ||||
consum de energie | Alergare:3W Max. (DC 12V în); Așteptare: 0.5W Max. (DC 12V în) | ||||
Interfață de control de la distanță | UART / ȘI | ||||
Temperatura de lucru | -20℃ ~ + 50 ℃ | ||||
Temperatura de depozitare | -40℃ ~ + 65 ℃ | ||||
Iesire audio | Stereo | ||||
raport de aspect video | 16: 9; 4:3 | ||||
Căutare | Căutare automată de canale, Căutare manuală | ||||
Video Interfață de ieșire | CVBS, HDMI | ||||
controlul infraroșu | NEC receptor în infraroșu de la distanță Standard | ||||
Dimensiune | 112mm × 67.5mm × 22mm | ||||
Comentarii | avansate de procesare a semnalului pentru condiții de mediu mobile |
Întrebări frecvente
Aproape 14 Watts consum.
1W is enough for a 1km distance. But we will make 2W for you to ensure the best reception performance.
It also depends on your local environment, whether it is LOS or NLOS, please check our test video, there are many floors and buildings.
For changing different power amplifiers about 500 MW, 1 Watt, 2 Watt, sau 10 wați. It is not just adjusting the setting in the software, You also need to change the Power amplifier hardware inside the transmitter. It can not operate and change at the normal end-user, and the cost and transmitter metal box size are different.
The default frequency setting is 503 Mhz, 509 Mhz, 521 Mhz, și 521 Mhz to choose, one button on the cabinet can change. If you really need a 1.3Ghz band only, you should choose another model (1.2G or 1.4G). Please tell us the details of your demand.
Video test
opinii
Nu există comentarii încă.