- Certification: NONE
- Origin: CN(Origin)
- Material Type: Abs
- Shell Material: Plastic
- Poder: max: 50MA, 12V.
- System signal: PA / NEC
Functions:
-
1. Automatic front view when staring:
When the engine is started, the system activates the monitoring machine and the front camera to check the front view for 8 seconds then turns it off.
- 2. Automatic rear view:
- 3. Front view always activates mode:
Push the control switch to enter the front mode.
In this mode, the system will monitor and activate the front of the camera at all times.
Exit the mode by pressing the control switch again.
Working priority: Rear view > Front view
Front view camera: presented by the remote control system.
Rear view camera: submitted by the control system or can be activated by being in reverse.
Specialisacion:
-
Poder: max: 50MA, 12V.
-
System signal: PA / NEC
-
Pafó di video: 1.0VPP / 75Ω
-
Emerita di funshonamentu: -20℃ to 80℃
Package Included:
-
1 x Parking Camera Video Control System
-
Test Video at Youtube
tips://youtube.com/shorts/8OY5o8SGN8Q
Preguntanan frekuente
Puntra 1: This box gets Acc dc 12v, GND…if I connect a front and a rear camera, how do they get Acc dc 12v, GND? For example front gets it from the box front input and the Acc DC 12v from the red cable, and how is GND? It may be included in the yellow Front input. Or I’m completely wrong and I have to connect separately for the front and rear camera their own Acc dc 12v, GND!?
Kontesta: The GND wire of the camera can be connected to the GND wire of the car lights or any wire that is drawn from the black wire of the battery, and can be connected anywhere on the car. The GND wires on the car are all connected together.