- Origin: CN(Origin)
- Paquete: Sí
- Applies to: For iOS Android iPad phone DSLR Video
- Applies to1: for DSLR Camera Gimbal iPad phone
- Applies to2: for Crane 2S 3S Weebill S Gimbal Stabilizer & Cameras
- Applies to3: for Camera Image Wireless HD Video Transmitter Receiver
- Applies to4: For Canon Sony DSLR Camera
- Characteristics: 4TX and 1RX 800 M/2625FT
- Features1: There are 10 wireless channels to choose from.
- Features2: No delay, no compression
- Features3: Two send one receive or four send one receive
wireless video transmission HDMI SDI 1080P transmitor 4TX and 1RX 800 M/2625FT hd sdi wireless video transmitter system
main feature:
1. The maximum transmission visual distance can reach 800m (about 2600ft).
2. 10 wireless channels are available for free selection.
3. No delay (<1ms/less than 1ms), no compression (visual lossless).
4. 4 sending and 1 receiving.
5. The receiver power supply supports the redundancy function, which can be powered by the battery and the DC power supply at the same time, seamless switching, the four receiver power supplies are independent, and damage to one channel will not affect other channels.
6. Wide voltage input (9-18VDC).
7. Simple operation, fásil ta hiba, no need to disassemble the antenna, you can use it after taking it out
Detailed description of wireless video transmission system
Forma di video: 1080ps 60/50/30/25/24/23.98/29.97/59.94
1080PsF 24/25/1080i 60/50/720fps 60/50/59.64/480i/P 60(NEC)/576i/P 50(PA)
Retraso: no delay (<1ms less than 1ms)
Audio: SDI/HDMI built-in 24 bit/48KHz PCM
Operating frequency: 4.9-5.9GHz suitable for Asia, the United States, Oropa, etc.
RF power: <18dBm
E distansia di transicion: Up to 800m (about 2600ft)
E hanchura di strepi: 40MHz/set
Anti-interference: can coexist with WIFI 5G mobile phones, etc.
TX input voltage: 9-18V DC
RX input voltage: 9-18V DC
TX power: <7 watts
RX power: <30 watts
TX screen: 0.96 inch OLED
RX screen: 0.96 inch OLED
Working temperature: -10~50°C
TX size: (length x width x height): 130×69×24mm
RX size: (Length x Width x Height): 305×310×55mm
Actualisa: Upgrade the firmware through the Mini USB interface
Inflacion: 1. TX comes standard with F970 battery gusset, 2pin lemo,
2. RX comes standard with a V-shaped battery gusset and a 2pin lemo.
3. TX “1/4” RX “1/4” “3/8” PTZ screw hole.
Wireless video transmission system channel setting (TX)
The transmitter and receiver channels must be set to the same channel (our product has 10 bakinan (0~9), 234569 is preferred)
1. TX channel setting method
Step1: Press the power switch to start TX.
Step2: Long press the “MENU” button on the transmitter until the display is unlocked and released.
Step3: Click the “+” òf “-” button to select the channel, and then click the “MENU” button to confirm
recognition.
Step4: The transmitter channel is set successfully.
Wireless video transmission system channel setting (RX)
RX channel setting method
Step1: Start the receiving end.
Step2: Long press the “MENU” button on the receiving end until the display is unlocked and released.
Step3: Use the “<>” button to select the channel, and then click the “MENU” button
to confirm.
Step4: The receiver channel is set successfully.
Wireless video transmission system function introduction
The standard list of the wireless video transmission system
Transmitter TX: 4
Receiver RX: 1
5G antenna:12
Power cord: 4
SDI connection line: 4
Hand of Universal Monster: 2
PTZ adapter screw: 1
Power adapter: 1
Product standard list: 1
Aviation suitcase: 1
Outer packing carton: 1
Bracket: 1
M6 hand lemon screw: 1
1/4 Torx hand lemon screws: 4
Bracket firmware screw M8:1