No products in the cart.
1km wireless video transmission transmisster receiver wireless network bridge
1km wireless video transmission transmitter receiver wireless network bridge
1km wireless video transmission transmitter receiver wireless network bridge
Features
This is a high-performance, high-stability 5GHz wireless network bridge product. The product integrates an advanced 802.11ac wireless core and a high-gain dual-polarized directional antenna. The device’s operating system has rich functions, strong wireless communication optimization capabilities, and is backward compatible with the 802.11n standard.
IPOLL (Intelligent Dynamic Polling Protocol) has strong anti-interference ability, even in areas with severe interference, it can still ensure stable access to base station equipment for 64 users.
The device is equipped with dual firmware mirroring. During the remote software upgrade process, even if the power supply is interrupted and the upgrade fails, the user can still restart the device normally.
The sturdy shell made of polycarbonate plastic contains ultraviolet inhibitors, which ensures that the shell will not be damaged and cracked when exposed to outdoor sunlight for a long time. This product design and testing meet the IP-66 protection level. Vibration, temperature and humidity, salt spray, and surge impact are all in line with industrial standards, ensuring that it is at the leading level in the industry with excellent reliability. The equipment is equipped with a grounding lug and POE power grounding protection for installation to prevent lightning strikes.
Specifications
| Wireless | |
| WLAN standard | EEE 802.11 a/n, iPoll |
| transmission mode | IPOLL MIMO 2×2 |
| wireless frequency band | 5 GHz: 5.150-5.850 GHz (FCC 5.150-5.250 and 5.725-5.850 GHz) |
| transmit power | up to 30 dBm (varies by region) |
| Receiving sensitivity | -97 ~ -75 dBm (depending on the modulation method) |
| Channel bandwidth | 5, 10, 20, 40, 80 MHz |
| Modulation method | 802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
802.11 ac: OFDM (256- QAM, 64-QAM, 16-QAM, QPSK, BPSK) |
| error correction method | FEC, selective ARQ |
| duplex mode | time division duplex |
| antenna | |
| type | integrated dual polarization directional panel antenna |
| gain | 20 dBi |
| polarization mode | vertical/horizontal dual-polarization |
| cross Planned isolation | 27 dBi |
| Maximum standing wave ratio | <1.8 |
| Horizontal polarization lobe angle | 10° |
| Vertical polarization lobe angle | 10° |
| Longitudinal lobe angle | 10° |
| Wired | |
| interface | 10/100/1000 Base-T, RJ45 |
| software | |
| wireless mode | access Point (Auto WDS), Access Point (iPoll), Work Station (WDS, iPoll), Work Station (ARP NAT) |
| Wireless Technology | Smart Site Polling, Automatic Channel Selection, Automatic Modulation Mode Selection, Automatic Transmit Power Control (ATPC) |
| Wireless Security | WPA/WPA2 personal encryption, WPA/WPA2 enterprise encryption, WACL, user isolation |
| wireless QoS | IPOLL to achieve 4-queue priority |
| network mode | bridging, IPv4 routing, IPv6 routing |
| network technology | no NAT routing, NAT routing, VLAN |
| WAN protocol | static IP, DHCP client, PPPoE client |
| service | DHCP service, SNMP service, NTP client, route tracking, ping watchdog |
| physical characteristics | |
| size | 216 mm (length) × 184 mm (width) × 80 mm (height) |
| weight | 413g |
| installation | wall/steel tube bracket |
| power supply | |
| Equipment power supply | 12-24V DC passive PoE (the product comes with a 24V passive PoE adapter) |
| power supply | 100-240V AC |
| power consumption | 10W |
| ambient | |
| temperature | -40°C ~ +65°C |
| humidity | 0 ~ 90% (non-condensing) |
| management | |
| system Monitor | SNMP v1/2c/3 services, system logs, send alarms through Email and SNMP traps. |
| Regulatory | |
| certification | Complies with FCC/IC/CE standards. |
Related products
Wireless Video Transmission
$4,599.00
Wireless Video Transmission
Wireless Video Transmission
Wireless Video Transmission
Wireless Video Transmission
COFDM Modulator Demodulator Module Encoder Decoder HDMI CVBS AV Input AES 256 FHD RF streaming
Wireless Video Transmission
2W PA 27KM Real Test from mountain top to seaside Line-of-Sight
Latest 110km test video for the drone Long-range Wirless Video Transmitter and Receiver
Latest test video for the drone Long-range Wirless Video Transmitter and Receiver
NLOS wireless video transmitter and receiver test video in building indoor lift non line of sight
65 KM drone UAV Really fly Test Wireless Video Transmission
1.5km for ground NLOS, 10-20-30km LOS air to ground wireless video transmitter receiver transmission
80KM wireless transmitter-receiver Video Data RC Transmission System HDMI SDI long-range low latency
COFDM-912T NLOS (non-line of sight) 1.5km real test in city, buildings, trees and roads
Web Device Management UI for UAV wireless video data link transmitter transmission by IP Net camera
6.5 KM drone UAV Really fly Test Vcan1643 Main Feature
One HDMI Wireless Video Transmitter to many receivers for home meeting show room.
SDI Camera input encode board + Wireless Video Transmitter assembly DIY
COFDM-907T HDMI + CVBS input NLOS (non-line of sight) 1.5km real test in city, buildings
Cheapest CVBS RCA 720P Wireless Video Transmitter + 1080P Receiver Support 128 encryption
How to set encryption on the transmitter and receiver to protect your privacy
COFDM-912T Really test in the complex city environment, transmitter in the car, receiver in the building
Modify the COFDM Wireless Video Receiver to 890 900Mhz, out of normal DVB-T reception range
Cheap Wireless video transmitter and receiver's small screen has great help on signal strength lock
Modify our tv box to 445.5Mhz 7M bandwidth COFDM DVB T wireless transmitter transmission receiver box
COFDM-905T COFDM Wireless Video Transmitter with two board, Encode board and transmitter board
COFDM-905T Wieless Video Transmitter by CVBS video input test video
how to connect mini wireless HDMI video transmitter and receiver kit use android phone as receiver
OFDM Wireless Video Transmitter for IP Cameras Lightweight Long Range Transmission Automatic Network
Transmission Distance
PA Power Amplifier Inside
Flight Control Protocol
Transmitter Video Input
Wireless Transmit Method
Obstacle and Sight
Encrypt and decrypt
Transmission Carrier
Data Direction
For
Frequency
Application Place
Feature
Antenna
Countries Sold
FAQs about Wireless Video Transmitter and Receiver
1. What types of video inputs port does your wireless video transmitter have?
Our wireless video transmitters have these types of video input interfaces: HDMI 1080P and 4K HDMI, CVBS composite, SDI, AHD, IP Ethernet, BNC, or tell us what type do you need, our engineer will modify to meet your demand.
2. What is the transmission distance supported by your wireless video transmitter?
Our transmission distance can be adjusted by adding power amplifiers. At present, the main ones are 15km, 30km, 50km, 80km, 100km , and 150km, which depend on the needs of customers.
Of course, the transmission distances listed above are all within LOS the line-of-sight range. If there are obstacles between the transmitter and the receiver, NLOS (the non-line-of-sight), the transmission distance is greatly reduced, only 1km or 2km, depending on the number of intermediate obstacles and the local wireless environment.
3. What is one-way or two-way? Simples vs half-duplex, full-duplex
One-way means, We can only transmit and download video or data from the wireless video transmitter to the receiver in one direction, and we cannot upload video or data from the receiver to the transmitter. This type is also called simplex.
Two-way means that, not only we can download video or data from our wireless transmitter to the receiver, but also we can upload the video or data from the receiver to the transmitter. This is very suitable for operating drones. You can not only see the real-time video transmitted from the drone, but also upload the command to control the drone or the command to control the PTZ camera to adjust the angle to the transmitter. This can operate simultaneously. This type also named half-dulpex or full-duplex.
Please check the details at the below link. https://ivcan.com/request-a-quote-of-wireless-video-transmission/#simplex
4. Does your HDMI video transmitter support encryption and receiver decryption?
Most Wireless video transmitters now support AES128 or AES256 bit encryption and decryption, depending on which model you choose. Please contact us to verify.
5. Can the frequency of the wireless video transmitter be modified after ordinary users receive the goods?
The frequencies of both the wireless video transmitter and the wireless video receiver can be modified. Users need to purchase additional parameter configuration boards.
However, considering that the corresponding power amplifier and antenna are already fixed within a certain range when the goods are sent out. If the user adjusts the frequency of the transmitter, the corresponding power amplifier, transmitter antenna and receiver antenna should also be modified to the same frequency, and these users need to be prepared. If not, it will cause the frequency of the wireless video transmitter to be different from the frequency of the antenna, making reception difficult. So please be sure to inform the correct frequency you need before placing an order.
If it is for security or confidentiality, you can use the encryption and decryption functions of the transmitter and receiver, which can ensure that your video transmission is private. .
6. I saw that your model is very similar to my needs, but I need to modify one of the parameters, is that possible?
Yes, all our product parameters can be customized according to customer's needs. If you have a special request, please let us know via the link below.
https://ivcan.com/request-a-quote-of-wireless-video-transmission/
7. What should I do if my wireless video receiver shows a weak signal?
- Change the place of the receiver to avoid potential local interference from strong magnetic environments.
- Ensure that the antennas on both the transmitter and receiver are vertical.
- Please raise the antennas of the transmitter and receiver to maintain a certain height difference.
- Please look around to ensure that there are no obstacles between the transmitter and receiver.
- Change the orientation of the receiver antenna.
- If it doesn't work, try moving the receiver to be near the transmitter's position to see if it exceeds the effective wireless transmission distance.
- Or consider adding a relay of the transmitting between the transmitter and receiver.
- The antenna should be as high off the ground as possible, as the ground will absorb the transmitted signal.
8. Can I buy modules of the transmitters and amplifiers only? I want to assemble them into my equipment.
We can, of course, supply wireless video transmitter modules and power amplifiers.
For the first sample test, I recommend that you purchase the entire set of products because our engineers have optimized the parameters to achieve the best performance.
After you have completed your test verification, you can remove the case or heat sink, install it in your device, and constantly adjust the parameters to achieve the best performance. In the future, you will be able to purchase only the modules or accessories that you require.
9. Can you take a test video for me to see before shipping?
Of course, we also understand that wireless video transmission transmitters and receivers are very expensive. You are far away from the China factory. and hope that the goods you receive are fit for the best performance.
If you pay special attention to a specific parameter or function, we can take some test videos based on the features you want to see, please feel free to contact us. It won't be shipped to you directly without your approval.
10. How to test the latency of wireless video transmitters and receivers?
To test the delay of the wireless video transmitter and receiver, we need to do two tests.
The first is to test the delay from the camera to the display.
The second is the camera, plus the display plus the wireless image transmission transmitter and the delay of the receiver.
Subtracting the two test results is the real delay of the wireless video transmitter and receiver.
As a professional long-range HDMI wireless video transmitter and receiver supplier and manufacturer in China Shenzhen, we produce the best wireless video transmitter and receiver for many years, and we got a good reputation and best reviews.
Some famous brands of wireless video transmitters, like Blackmagic, Holyland mars 300 400s, Accsoon cine eye 5g, RavenEye, Zhiyun, Inkee benbox, actiontec, CVW SWIFT 800, dahua, iogear, Artek pat-225k, microlite, nyrius, teradek.
The best budget wireless broadcast video transmitter and the receiver have many applications, for 4K tv, CCTV security camera, vehicle backup camera, PTZ video camera kit, battery-powered, computer, sony camcorder, wifi video conference system, CANON DSLR, UAV drone, pc computer laptop, projector, in-car, iPhone iPad, live streaming, GoPro sports camera, raspberry pi, Xbox.
The full HD video, audio, data link smallest 1080P wireless video transmitter and the receiver has many input and output connectors, like AV composite CVBS, HDMI, SDI, BNC, VGA, USB.
The wireless video transmitter sender TX RX frequency has 170-806Mhz, 1.2ghz, 2.4G, 5.8G, lowest but not zero latency. In order to support longer distances, the power amplifier has 10w, 20watts, and even 30W.
What is a best buy FHD wireless video transmitter at a cheap price? It should consider your details requirement, choose suitably, not expensive, if you have any doubt, please fulfil the request a quote form, our engineer will offer you a solution.
