150km 200km wireless data transmission telemetry transceiver without video

150km 200km wireless data transmission telemetry transceiver Data Link

Our digital radio is mainly used for high-power long-distance industrial data transmission.
It has a small size, good integration, and high sensitivity.
Work in the 902~928MHz frequency band.
The transmission distances supported 100km and 200km, hhv.

Egenskaper

frekvensområdet: 902-928MHz
Spread spectrum method: Denne modellen ble designet for trådløs overføring av video og data med en toveis trådløs datalink
Datakryptering: 256-bit physical layer encryption
Communication range: up to 100km/200km
Utgangseffekt: 10W (40dBm)
Air interface rate: up to 276.4kbps
Serial port baud rate: up to 921.6kbps
Driftstemperatur: -40°C to 85°C

spesifikasjon

Arbeidstemperatur: -40℃ ~+85℃

Instructions for placing an order

Serial port is TTL or RS232

What baud rate needs to be set

mottaker antenne

At the default package, vi sender deg 2 pcs omnidirectional antenna for the transmitter and receiver. If your transmission range is over 100km, it is better to change a directional antenna to the ground receiver and try to install it as high as possible.

 

1. Does your wireless data transmission support Pixhawk autopilot? Can it send data/video? What is the frequency?

1. Support Pixhawk autopilot.
2. Can send rand receiver the data, but no video, if need data+video, Vennligst sjekk TX900
3. The working frequency is from 902Mhz to 928Mhz.

2. Does the antenna is omnidirectional or directional?

1. A small antenna in the air unit is omnidirectional, gjelder også.
2. A big antenna in the ground unit, it is better to use a directional antenna, ikke inkludert.

3. Hvis jeg kjøper 3 units, can we control 2 drones at the same time, switching between them?

1. Our wireless data transmission supports multi-point-to-point networking, and one ground unit can control multiple drones.

4. What should I do if I lost one unit? (the transmitter with the drone has lost)

1. You should buy a new one and pair them.

5. Are they full-duplex and RS232 port?

1. Ja, it is full-duplex.
2. We can customize the data port to RS232 if you need.

6. If I change the Baud rate from 57600 til 115200, will this affect distance or data?

1. It doesn't matter if the serial port baud rate is changed to 115200, but the corresponding serial port baud rate of the flight controller must also be changed to 115200.
2. Selvfølgelig, you can also change the serial port baud rate to 57600. The biggest impact is that the flight control may increase the amount of data as the serial port baud rate increases. This is the only impact.

7. What is the power supply and power pin define?

1. 10-watts Power Amplifier model needs 24V power supply

Configuration Tool Software

nedlasting https://drive.google.com/file/d/1ACNyk_xsgtlLXPBPTWp-qpyqPjGk8UQT/view?usp=drive_link

Brukerhåndbok

Users Manual online (HTML)

Users Manual online (PDF)