pa effektforsterker
PA RF Power Amplifier for DVB-T COFDM TX Transmitter transmission 1-watt 2-watt 5-watt 10-watt 20-watt 30-watt 40-watt 50-watt Frequency Customization 170-3000Mhz (1.4G 2.4G 3G)
Innholdsfortegnelse
Tilpasning
How many power watts do you need?
What frequency range do you need?
Does the power amplifier need -10dBm input?
Pa effektforsterker rf-modulen realiserer effektforsterkningsutgangen til RF-signalet. Når inngangsspenningen er 12V, koble til COFDM-modulasjonskortet, utgangseffekten kan være opp til 1W (+30dBm)
Egenskaper
- Arbeide frekvensbånd: 300MHz ~ 360 MHz (mer frekvens er regulerbar)
- Gevinst: 45dB
- Pout: +33dBm (PAR = 9.9dB)
- ACPR: < -36dBc
- IP3: +49dBm
- støy~~POS=TRUNC: 6dB
- Forsyningsspenningen: 12V, utgang 1W (+30dBm) overføre makt, Strømforbruket er ca. 8.7W.
- RF grensesnitt: SMA utvendig gjenge hull
spesifikasjon
Elektriske spesifikasjoner @ + 25 ℃,ZS = ZL = 50Ω,Vcc = 12V
Parameter | Enhet | Minimum | Typisk | Maksimum |
frekvens~~POS=TRUNC | MHz | 300 | Valgfri | 360 |
Small Signal Gain | DB | 45.0 | ||
Gain Planhet dB | DB | +/-0.5 | ||
Output Power Pout @Pin=-15dBm | dBm | 30.0 | ||
IP3 dBm +49 | dBm | 49.0 | ||
ACPR(WCDMA PAR = 9.9dB) | dBc | -40 | ||
Reverse Isolation | dB | -45 | ||
støy~~POS=TRUNC | dB | 4 | ||
Effektivitet(Pout = + 39dBm @ 470MHz) | % | 13.8 | ||
VSWR innspill | 1.3:1 | |||
produksjon | 2.0:1 | |||
DC Power Supply | V | 7.4 | 10.0 | 12 |
forsyning Current (hvile~~POS=TRUNC) | mA | 300.0 | ||
størrelse | 35.1mm x 0,6 mm x 18.1mm |
valgfritt Frequency
PA1W330 Frequency 300 ~ 360 MHz
PA1W470 Frequency 450 ~ 500MHz
PA1W550 Frequency 544 ~ 564Mhz
PA1W600 Frequency 580 ~ 620Mhz
PA1W700 Frequency 680 ~ 720Mhz
Tilpasset 2W
2w PA Power Amplifier 185Mhz-215Mhz 12V 75ohms 6dbm inndata 33dbm utgang
Absolutte maksimum Vurderinger
Parameter | Absolute Maximum |
RF inngangseffekt | -5.0 dBm |
Forsyningsspenningen | +14V |
Driftstemperatur | -40℃ til + 65 ℃ |
Lager temperatur | -55℃ til + 100 ℃ |
2~3W COFDM Power Amplifier
This amplifier is a 2~3W Sub-1GHz linear power amplifier, designed for COFDM transmitter applications. The amplifier offers a compact and rugged design.
2-3W COFDM power amplifier Feature
- Gevinst: ≥41±1dB
- Maximum RF input power: -8±1.0 dBm
- RF Power out 33~35dBm(2~3W)
- ACPR: < -35dBc
- impedans: 50ohm
- DC Supply Voltage: 12~17VDC
- Strømforbruk: <18W
- RF inn: SMA female Connector (SMA-50KFD)
- RF ut: SMA female Connector (SMA-50KFD)
- dimensjoner: 81x48x14mm
- Vekt: 90g
- frekvens~~POS=TRUNC: central frequency in 160MHz~900MHz(Specify)
- båndbredde: 30MHz to 40Mhz
5W COFDM Power Amplifier
5 watts cofdm power amplifier features
- Gevinst: ≥45dB
- Maximum RF input power: -8 dBm
- RF Power out 37dBm
- ACPR: < -35dBc
- impedans: 50ohm
- DC Supply Voltage: 12~16VDC
- Strømforbruk: <30W
- RF inn: SMA female Connector
- RF ut: SMA female Connector
- dimensjoner: 94x58x14mm
- Vekt: 136g
- frekvens~~POS=TRUNC: central frequency in 200MHz~900MHz(Specify)
- båndbredde: 30MHz to 40Mhz
Vanlige spørsmål
Please tell me what frequency range do you need a 15W power amplifier for? If your needs do not match our inventory, it will take 2~3 weeks to customize.
OK, sjekk her.
Spørsmål: Can you show OUT +12V IN only?
Svar:
- It would be best to have the technical parameters and specifications of the amplifier written on the casing like we currently have in the above picture.
- One day in the future, when you need to return it to the factory for repair, our engineers can repair or replace it according to the specifications of the shell.
- If there are no these words on the shell, we have no way to provide after-sales technical support.
Spørsmål: Can you please not print the production date on the casing?
Svar: We provide 12 months quality guarantee. The production date on the casing is an important basis for after-sales service.
- Each PA has a center frequency point. The PA can work normally within a certain frequency range, but its performance is the best at the center frequency point.
- The frequency range of PA is +-15Mhz of the center frequency. If the center frequency point is 600Mhz, then this PA frequency range is 600Mhz, + / -15Mhz, from 585Mhz to 615Mhz.
- The max frequency range is 10% of the center frequency point.
for eksempel, if you choose the working frequency of 500Mhz, then the frequency range is 10% of the frequency, so the frequency range should be 50Mhz, from 475~525Mhz.
-
The current will increase and it will not be damaged, but no load and short circuit for a long time are not recommended.
-
Our Engineers are worried about burning out the filter after the power amplifier. High power for a long time will cause the filter to heat up.
-
The power amplifier has no load and short-circuit protection circuits.
nedlasting
PA 2~3W (160~900Mhz Power Amplifier)
PA 5W (160~900Mhz Power Amplifier)
PA 10W (160~900Mhz Power Amplifier)
Spørsmål: Could you show me the real photos of your RF linear power amplifier?
Svar: sure, please check the below pictures.
anmeldelser
Det er ingen omtaler ennå.