Ethernet Vervang USB-TTL op automatische antenne-tracker

Omdat ik een V6X Flight Control en Ethernet UDP gebruik voor communicatie, I don’t use the existing USB-to-TTL serial connection on my Automatic Antenna Tracking systeem. What physical connection I should use?

1. As our AAT automatic antenna tracker does not have an ethernet port, only accept serial, so you need to buy an Ethernet to TTL serial port converter board. We have to convert UDP to serial.

2. Connect our autmatic antenna tracker to ground receiver of your wireless radio link

The AAT automatic antenna tracker does not need to connect the TX, he just used the GND and RX signal. Pin#1 tx is not necessary, The tracker only needs RX.

3. Connect the left connector on the AAT automatic antenna tracker.

Blue is RX, zwart is GND, Connect to blue please. pin#2 blue is rx, pin#6 black is GND.