Medio COFDM Telemetría Transmitter receptorem plena Set Wireless Digital Audio Video TX cx RX ad UAV Drone

1. Etiam, the frequency range can be changed from 170Mhz (melior from 220Mhz) ad 860Mhz*. So it can work well at 260Mhz band.
2. Frequentia immutanda est eidem in transmittente et recipiente. de causa, Potentia Amplifier et antennae frequentia eadem frequentia temperare debent. (Potestatem amplificantis et antennae emere debes pro transmisso et receptore ut obviam frequentia tua mutata sit).
3. In order to improve the sensitivity of transmitting and receiving, the frequency bandwidth is generally made very narrow (center frequency ±15Mhz, so bandwidth should be 30Mhz). The power amplifier of the transmitter and the frequency of the antenna are specially customized according to the frequency you need.
4. It is best when you place an order, please tell me what kind of working frequency you need. Our engineers will modify the frequency of the transmitter and receiver, and also modify the PA and custom antenna according to this frequency range to ensure the best sensitivity and support the longest transmission distance.
5. Default frequency est 590Mhz, cum 30Mhz* (+/-15Mhz), Potentiam amplificantis et antennae eam mutare sine modificatione potes. eg, 578Mhz, 584Mhz, 590Mhz, 596Mhz, et 602Mhz.
6. If you need to modify the transmitter frequency and bandwidth, you need a special tool of the parameter configure board, please see the below picture, it is not a default accessory, please buy it at an extra cost or contact us before ordering.

Etiam, sustinet ut video et UART data ex transfusor et accipientis.
Sicut est unus modus tradendi, ideo non potest mittere imperium a recipiente ad transmittem.

Si mandata dominii vel alia data ab accipiente mittere debes ut alias machinas regendas sicut cameras vel fucos in transfusore, vos can add a paro of cheap digital tradendo apparatu, nobis loquere, et non possumus domicilii pro vobis.

Quaeso reprehendo UART definire in transfusor et receptor in inferiore pagina. Indica mihi si vis habere funem plumbeum. (default est)

Transfusor default Power Amplifier is 2 Watts, ut possit sustinere 30 KM at line-of-sight.

Infra picturam est nobis probata procul a monte ad oram maris.

Si vis longius transmittere, auget potentiam potes amplificator. Praeter unum Watt et Duo Watts, nos quoque facere 5 watts, 10 watts, et 20 Watts ad arbitrium. Ampliores amplificatores etiam ampliores gravidas et subsidia current.

For 20W PA, the power supply should be 24~28V. Only at 28 volts can the power amplifier achieve the best workability.

Our engineer can change the frequency to 300Mhz from the default 590Mhz, The antenna, and PA in the warehouse are 590Mhz, 300Mhz needs two weeks to customize, sic traditio temporis longior quam defectus 590Mhz eget.

Defectus plenus paro

1. SD Transmitter ( PA 0.5W, 1W, 2W, 5W, 10W, 20W, 50Ad libitum secundum ordinem vestrum W demanda)
2. Antennae SD Transmitter
3. HDMI CVBS output receptaculum cum parametri potestate menu et parvis velum
4. 0.8-antenna meter receptor 1 pede. (Duo sunt genera institutionis vel figendi antennae: 1. magnetic sucker base antenna, 2. default U-type clamp FRP fiberglass antenna )
5. libitum, parametri configurationis tabulam pro wireless video transmitter.

(If you need a magnetic sucker base antenna, the express or carrier thinks the magnetic products will interfere with their plane safety, so the shipping cost is higher than a U-type clamp antenna. )

Quod default plenus paro sarcina dimensio

1. 84*21*12CM
2. Gross Weight 4.5KG
3. If you choose over 100cm antenna and magnetic sucker base antenna, Quidam feugiat adiutores et arguere extra fees, sicut extra longa feodis et extra feodis pro fortis magnetica items.

1. Parameter transfusor tabulam configurat differt ab illa in recipiente. Firmware tabulae parametri figurae diversae sunt ab transmittente et accipiente, non possunt inuicem.
2. Parameter transfusor tabulam configurat signum attenuationis in transfusore accommodare. Per 0.3db will reduce the 0.5W PA.

Quaeritur: Is it possible to change the outpout power (internal PA 0,5 Latin, 1 Latin, 2 Latin) via the configuration board?

1. As answered above, you can adjust the output power by setting the parameters of ATTEN through the parameter configuration board tool on the transmitter. (This tool does not include the default package, you need to notify that you want to have this tool when you order)
2. If you buy 2W PA, then you can set it 0.5W, 1W, but can not change it to 5W.
3. We also can make it to 5W, 10W, 20W, and 50W if you need to support long-range.

No.

Hoc wireless video transmitter tantum sustinet CVBS camera vel video input, aliud genus video camera eget extra converter arca.

No. It is COFDM (DVB T-) technology.

So the COFDM frequency range is 170-860Mhz. It can support 477, 610, 675, 724, 816Mhz, but can not support 970, 1180, 1230 Mhz.

Our special model transmitter can support all the above ranges, but the receiver needs to use the downconverter block.

In order to allow our wireless transmitting system to support a wider range and better signal strength, we generally set the operating frequency to a certain point (170~860Mhz), and its supported range is only plus or minus 15Mhz. eg, the center frequency is 590Mhz, max support frequency range should be 575Mhz~605Mhz, The PA and antenna are specially customized according to this center frequency.

Etiam