Carane nganyarke pemancar video nirkabel lan perangkat kukuh panrima TX900

nganyarke pemancar video nirkabel lan perangkat kukuh panrima

Model sing ditrapake program upgrade

Nganyari Firmware Download

Iki v1.5.0 versi perangkat kukuh nambah support server TCP kanggo D2 lan D3 bandar serial (dikonfigurasi liwat kaca web), lan pelanggan bisa nganyarke kaca web miturut pituduh ing dokumen kasebut.

Wigati: Sawise upgrade, paramèter asli saka customer (kayata alamat IP) tetep ora owah. Download upgrade pemancar video nirkabel lan perangkat kukuh panrima.

update_image_v1.4.3_fixup_2023.1.4

nganyari_gambar_v1.5.0_2022.12.13

dlm_update_image_v2.5.2_2023.11.1

Upgrade Firmware Langkah

1. Sambungake pemancar utawa panrima menyang komputer liwat kabel jaringan, mlebu 192.168.1.11 ing browser komputer (yen sampeyan durung ngowahi alamat IP standar), ketik server Web, lan ngalih kaca sistem.
2. 
3. Click the button next to “Upload file”, lan pilih file upgrade (ati-ati aja nganti unzip).
4. 
5. Sawise milih file, klik tombol Upload kanggo miwiti ngunggah perangkat kukuh upgrade.
6. 
7. Kothak pituduh bakal muncul yen perangkat kukuh wis diunggah kanthi sukses. , lan ukuran file sing diunggah ditampilake.
8. 
9. Sawise konfirmasi manawa ukuran file wis bener, klik tombol Nganyarke kanggo miwiti nganyarke perangkat kukuh (ati-ati supaya ora medhot daya piranti sawise miwiti nganyarke perangkat kukuh).
10. 
11. Sawise piranti nganyari, bakal ana pesen pituduh lan bakal diwiwiti maneh kanthi otomatis.
12. 

Apa sing anyar ing saben versi upgrade pemancar video nirkabel lan perangkat kukuh panrima?

versi 1.1(2021.4.29)

1. Ngowahi logika implementasine saka transmisi transparan door-to-door (saka perspektif pelanggan)
2. Ngowahi nilai standar m_packet kanggo 400
3. Pemisahan port ngirim / nampa kanggo transmisi transparan door-to-door

versi 1.2(2022.4.2)

1. Tambah support baud rate port serial sing luwih dhuwur
2. Ditambahake dhukungan urip maneh menyang kaca Sistem
3. 3-werna dipimpin marquee pituduh ing wiwitan (trep kanggo testing produksi
4. Nggawe CFG drop-in nggunakake padha modul dhewe gulung-in

versi 1.3(2022.4.25)

1. Tambah dhukungan bolong

versi 1.4(2022.8.23)

1. Ngapikake pangolahan audio
2. 2022.9.30 Pateni fungsi ngalih mode port serial D3
3. 2022.10.20 Ngapikake konfigurasi bolong
4. 2022.11.24 Tambah printah AT ^ CONFIG kanggo konfigurasi didhelikake internal

versi 1.5(2022.12.15)

1. Dhukungan server TCP ditambahake kanggo port serial D2 lan D3
2. 2022.12.30: Dilarang ngatur kaca web menyang mode Mesh
3. 2023.1.4: Multi-cast nglarang transmisi spontan.
4. 2023.7.25: Ngapikake pangolahan daya fix
5. 2023.8.2: Tambah server TCP kanggo konfigurasi parameter
6. 2023.9.7: Tambah IP maca lan nulis AT pangolahan printah menyang server TCP
7. 2023.9.13: Nambahake switch setelan pelanggan lan konfigurasi uplink lan downlink TDD
8. 2023.9.26: Ditambahake IP serep (192.192.192.192), ndhukung ngoper Cina lan Inggris
9. 2023.10.19: Ngatasi masalah ngganggu browser caching kaca web.

Apa sampeyan duwe pitakon babagan nganyarke perangkat kukuh pemancar lan panrima video nirkabel, hubungi kita.

Saiki konfigurasi pangiriman standar port serial D3 digunakake minangka port serial transparent. Carane aku kudu ngowahi kanggo interaksi printah AT?

The default shipping configuration of the D3 serial port is used as a transparent serial port. If the customer needs to modify it for AT command interaction, the internal AT command can be sent under the webserver to modify the role of the D3 serial port. The specific steps are as follows:

1. Log in to the debug page of the web server

2. Enter the “AT^CONFIG=1,0,0” command in the “At Command” column and the “OK” prompt will be returned if successful

3. Enter “AT^CONFIG?” command in the “At Command” column to check again to confirm whether the configuration is successful

Wigati:

1. After the above modification, you need to restart the power to take effect
2. If you need to modify D3 to be a transparent serial port again, just replace the above AT command with “AT^CONFIG=0,0,0”.