FPV Analog Video Transmitter CVBS audio video module sender 400-900MHz UHF vcan1904

FPV Analog Video Transmitter CVBS audio video module sender 400-900MHz UHF vcan1904

Yfirlit

This module belongs to UHF Radio communication equipment in the frequency band, which can transmit audio and video within a limited range. Designed for low power consumption, integrated VCO, PLL, and AM broadband video demodulation, The audio carrier frequency makes the module smaller; it adopts a small single-board package, which is convenient for users to miniaturize applications.

The application of this module only needs to simply connect the power supply, audio cable, and video cable, and connect the antenna to use a variety of electronic equipment terminals that support analog TV reception, including mobile phones, TVs, laptops, MP4, and digital photos.

Lögun

1. UHF AM broadband emission
2. Lítil stærð: 17*16.5*4.5mm
3. Wide voltage operation: 3.3-4.2V
4. Lágmark máttur neysla:3.3V 180mA
5. High output power:17dBm
6. Built-in frequency phase-locked loop high stability
7. Direct modulation of audio and video signals
8. Eight channels can be called flexible
9. Chipset ASE373C

Umsókn

1. Analog tv handset
2. VCD/DVD/DVB hljóð/Video wireless transmission;
3. Baby monitoring;
4. Real-time on-site image monitoring;
5. Security transmission system;
6. PSP game turns the TV
7. Wireless visual reversing

Pin Skilgreina

Pin	Pin Name	Ég/O	illustrate
1	VCC_IN	inntak	3.3V power input
2	GND	inntak	rafmagnsjörð
3	VIDEO_IN	inntak	Video inntak, the input impedance is 75 ohm
4	AUDIO_in	inntak	Audio inntak
5	CH1	inntak	Channel selection input
6	CH2	inntak	Channel selection input
7	CH3	inntak	Channel selection input
8	ON	inntak	loftnet

The long black cable is the transmitter antenna. 4 PIN, Red cable is power Input, Black cable is GND, Yellow cable is video input and White cable is audio input.

Application Circuit

Frequency selection table:

tíðni	CH1 CH2 CH3 pinna	tengja
775.25	0 0 0	CH1; CH2；CH3 GND
759.25	0 0 1	CH3 GND,CH1；CH2 null
743.25	0 1 0	CH2 GND,CH1；CH3 null
727.25	0 1 1	CH2；CH3 GND,CH1 null
711.25	1 0 0	CH1 GND,CH2；CH3 null
695.25	1 0 1	CH1；CH3 GND,CH2 null
679.25	1 1 0	CH1; CH2 GND,CH3 null
663.25	1 1 1	CH1; CH2；CH3 null

Specification

Alger hámark Ratings (Exceeding the maximum ratings may cause permanent damage to internal devices)
parameter	symbol	working conditions	minimum value	typical value	maximum value	eining
supply voltage	VCC		-0.5		4.2	IN
Inngangsspenna	Við		-0.5		VCC+0.5	IN
The output voltage	Vo	When the load condition is met	GND		VCC-0.5	IN
geymslu hiti	Tstg	Refers only to the module itself, without packaging	-20		60	° C
rakastig			10%	50%	85%
Recommended working conditions (If the recommended working conditions are not met, the specified electrical performance indicators may not be achieved)
parameter	symbol	working conditions	minimum value	typical value	maximum value	eining
supply voltage	VCC		3.3	3.3.	4.2	IN
Power supply ripple voltage	Vlp			10	25	mVpp
Inngangsspenna	Við		GND	–	VCC	IN
Vinnuhitastig	Facing	Only refers to the module itself, excluding other parts	-20	27	60	° C
Electrical Characteristics (VCC=5.0V, Ta=25°C)
parameter	symbol	working conditions	minimum value	typical value	maximum value	eining
supply current	Icc	Vcc=5.0V	160	180	200	mA
radio frequency
Output Power	RFo	50Ω system	16	17	18	dBm
framleiðsla viðnám			—	50	—	Oh
Transmit channel frequency	CH1		—	775.25	—	MHz
	CH2		—	759.25	—	MHz
	CH3		—	743.25	—	MHz
	CH4		—	727.25	—	MHz
	CH5		—	711.25	—	MHz
	CH6		—	695.25	—	MHz
	CH7		—	679.25	—	MHz
	CH8		—	663.25	—	MHz
frequency stability	Fstb		-100		+100	ppm
video
Video input impedance	Rvin			75Oh		Oh
Video inntak stigi	come on	negative polarity,75Ohload	0.9	1	1.25	Vpp
Tíðnisvörun	Fbdv	50Hz ~ 6MHz	-5		+5	dB
SNR	S/N			38		dB

FAQ

Can you make this UHF wireless video transmitter with a 10-watt amplifier?

ný Model

tíðni: 440~880Mhz optional, 20M step.
rás: rás 8
Power: 2W, 4W
Rafmagn: 12V DC
Núverandi: 2W@900mA, 1.2A@4W
Launch size: 66*45*15mm
Launch weight: 50g

Analogue Receiver Board