COFDM Video Sendandi

COFDM Video

Three in one image data control

H265/H264 video compression

Adaptive retransmission

frequency hopping

2.4GHz&5.8GHz dual frequency image transmission

Compact layout 65 × 43mm, weighing only 14g, can be integrated into remote control, ground station, or added to form a module with an outer shell

The Sprintlink DUO can automatically switch to the 5.8GHz frequency band, providing strong support for reliability through automatic switching, retransmission, and fast connection.

The implementation of an adaptive retransmission mechanism at the bottom layer not only greatly outperforms the retransmission mechanism at the application layer in terms of efficiency and latency, but also greatly improves the performance and user experience of the link in interference environments.

The module continuously detects the interference status of all available channels in real-time, and automatically selects and switches to the channel with the lowest interference in the current working channel, ensuring continuous and reliable communication.

OEM integration

Fjarstýring, mát, ground station

sendingarfjarlægð

10KM

Software Defined Radio (SDR)

The modifiability of communication underlying protocols endows the system with the ability to continuously evolve and optimize;

Improve sufficient and effective verification for chip based technology, greatly reducing the risk of chip casting;

Flexible customization to enhance design win capabilities

Orthogonal Frequency Division Multiplexing (OFDM)

Effectively eliminating multipath interference in long-distance transmission

Low Density Parity Check Code (LDPC)

The independently optimized QC-LDPC design endows the system with excellent error correction performance, greatly improving reception performance.

Private communication protocol

Optimized design for video transmission, optimized frame format and pilot greatly improve the reception performance of video transmission.

Product parameters

stærð	65mm×43mm
two × IPEX antenna connected to machine	Used for communication with peer modules
1 x FPC connector	Used for data communication with the host
4 x indicator lights	Used to indicate device status
tengi
1 x Ethernet interface	Used for video or data communication
1 x serial port	For data communication, 3.3/5.0 TTL stigi
1 x serial port	Used for module configuration and status acquisition, 3.3/5.0 TTL stigi
1 x SBUS	Remote control interface
1 x PPM	Remote control interface
1 x GPIO	Used for key triggered binding
virka
Vinna tíðnisviði	2.4GHz/5.8GHz ISM
bandvídd	20MHz/10MHz
Hámark sending máttur	25[email protected] [email protected]
DC Voltage	6~ 15V
neysla	5W
Operation hitastig	-20 degrees to 50 gráður
fjarlægð	20[email protected] [email protected]
and-truflun	Supports retransmission, adaptive frequency hopping, and fast link functions