30Km long distance COFDM HDMI Wireless Video Transmitter GYIK
30Km long distance COFDM HDMI Wireless Video Transmitter Receiver Full Set Audio Video TX RX for UAV Drone 1080P 908T
30-150Km távolsági COFDM HDMI adó Vezeték nélküli videó átviteli rendszer Vevő teljes készlet Audio Video TX RX UAV Drone UGV 1080P-hez
Funkció
- nagymértékben integrált, moduláris kombinált kialakítás
- COFDM modulációs technológia használata, H.264 image coding technology
- Egy 1080P HDMI-csatornát képes továbbítani (opcionális SDI) jel
- Alacsonyabb késleltetés, the minimum end-to-end delay is 200~250 milliseconds, We also have a super-lower latency model of less than 30-50 ezredmásodperc.
- Sokoldalú kommunikáció, nem fél a falakat
- Nagy sebességű kommunikáció az utazás között, the maximum moving speed can reach 600 km / óra.
- Adó hűtőborda típusú alumínium tok, ütésálló, Waterproof case is optional.
- Támogassa a LOS-t és a nem közvetlen rálátást (NLOS) mobil átvitel
- A távolság nem kisebb, mint 30 kilométer távolságban a látótávolság feltételével ( Power amplifier and distance: 2 Watts PA 30km, 5 Watts PA 60KM, 10 Watts PA 100km, 20 Watts 150km at LOS)
- Audio és video jelek szinkron vétele, nagyfelbontású HDMI1080P többformátumú opcionális, szabványos felbontású kimeneti DVD képminőség
- A vevő képes megvalósítani a videofelvétel és a mentés funkciókat
- 128-bit AES titkosítás és visszafejtés
- Teljes testreszabás elérhető
- Upgrade tool: Parameter Configure board
- Használat: UAV, Járművek & UGV
- Moduláció: COFDM
- üzemi feszültség: DC11V-DC13V
- Munka jelenlegi: 0.5~ 2W (a különböző PA-tól függően)
- Átviteli teljesítmény: 0.5W~20W optional
Tartalomjegyzék
Alkalmazás
Ezt a terméket elsősorban a közbiztonsági és biztonsági ellenőrzési osztályok műszaki felderítéséhez és bizonyítékgyűjtéséhez használják, pilóta nélküli légi járművek valós idejű képátvitele, pilóta nélküli hajók, rádió és televízió továbbító, rádiós és televíziós élő adások: sugárzott mező, sport közvetítés, társadalmi hírek, levegő élőben, stúdió, hegymászó expedíció, és egyéb szempontok. Alkalmas kiváló minőségű képek valós idejű mobil továbbítására különböző komplex környezetekben, például városi területeken, tengerek, és hegyek.
Adó specifikáció
modulációs módszer | COFDM |
üzemi feszültség | DC11V ~ DC13V |
működő áram | 0.5 Watts: ≤0,6A DC12V, 1 Watts: ≤0,8A DC12V, 2 Watts: ≤1.5A DC12V 5 Watts: ≤3,0A DC12V 10 Watts: ≤5.0A DC12V 20 Watts: ≤7.0A DC12V |
vezérlő interfész | szabványos RS232 interfész, 8 Adatbitek, 1 Stop Bit, Paritás Bit, Átviteli sebesség: 19200 |
átlátható adatfelület, | egyirányú átlátszó soros port továbbítás, 8 Adatbitek, 1 Stop Bit, támogatja a páratlan paritást, Paritás Bit, Vezeték nélküli paritás, Átviteli sebesség: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 |
titkosítási módszerek | támogatja a 128 bites titkosítást |
modulációs leképezés | QPSK (4QAM), 16QAM, 64QAM |
Forward Error Correction | 1/2 2/3 3/4 5/6 7/ 8 |
Guard intervallum | 1/32 1/16 1/8 1/4 |
Fuvarozó száma | 2K |
Frekvencia sávszélesség | 2 / 3 / 4 / 5 / 6 / 7 / 8M állítható |
átviteli kódfolyam | 2000kbs ~ 20000kbs Állítható |
átviteli erő | 0.5 / 1 / 2 / 5 / 10 Watts |
átviteli frekvencia | mw-1000mw-2000mw-COFDM-telemetriai-átviteli-vevő-készlet-2W-vezeték nélküli-digitális-audio-videó-adó-UAV-hoz, 1MHz lépés |
hatalmi laposság | 10 MHz-en belül sáv nélküli, mint 0,2 dB |
a váll aránya | a kimenő teljesítmény 27 dB, váll arány jobb, mint -30dB |
a második harmonikus | ≤ -45dB |
TÖBB | 32Db |
bemeneti videó | 720×480 60én(NTSC), 720×576 50én(HAVER), 720 50P, 720 60P, 1080 50én, 1080 60én, 1080 24P, 1080 25P, 1080 30P, 1920X1080 50P, a különféle módok adaptívak. |
HD interfész | HDMI, Az SDI opcionális |
videó kódolási formátum | H.264 |
védelmi szabvány | teljesen alumínium radiátor típusú alváz, korrózióvédelmi, ütésálló kialakítás |
Teljes méret | 9 x 6.4 x 2.3 cm |
Teljes súly | mw-1000mw-2000mw-COFDM-telemetriai-átviteli-vevő-készlet-2W-vezeték nélküli-digitális-audio-videó-adó-UAV-hoz |
Vevő specifikációja
Gépállványra szerelt, több sávszélességű HD vevő paraméterei | |
Vételi frekvenciatartomány | 170-860MHz VHF&UHF |
frekvenciasávszélesség | 2/3/4/5/6/7/8MHz, választható |
RF bemeneti szint | -94dBm ~ -15dBm (8M sávszélesség)/-98dBm ~ -15dBm (2M sávszélesség) |
RF bemeneti impedancia | 50 ohm |
RF bemeneti csatlakozó | N-fejű |
demodulációs mód | COFDM |
csillagkép mód | QPSK, 16QAM, 64QAM (választható) |
Forward Error Correction | 1/2, 2/3, 3/4, 5 /6,7/8 (választható) |
fuvarozó száma | 2k, |
őr intervallum | 1/32, 1/16, 1/8, 1/4 (választható) |
videó dekódolás | MPEG-2MP@ML/H.264 |
oldalarány | 4: 3 16: 9 |
videokép az | 720 * 576 @ 8MHz 1080P @ 60P |
hangkimeneti mód | sztereó kiegyensúlyozatlan 300 / 200mv |
hang kimenet | output2Audio + 2Videó kimenet |
üzemi feszültség | AC220V / DC12V <0.5A |
Üzemi hőmérséklet | – 20℃ ~ + 50 ℃ |
Megjelenés mérete | 480*260*45 (1U) alváz |
berendezés súlya | 1.5kg (kétirányú nyelv 2,5 kg) |
jegyzet: az alapértelmezett csatlakozó a HDMI, ha az olcsóbb modellre van szüksége, csatlakozó a CVBS sárga videocsatlakozóhoz 720p HDMI, kérem Ellenőrizze itt mw-1000mw-2000mw-COFDM-telemetriai-átviteli-vevő-készlet-2W-vezeték nélküli-digitális-audio-videó-adó-UAV-hoz.
Leírás:
– Ez az eszköz COFDM technológiát alkalmaz, amely integrálja az átviteli antennát, digitális moduláció, hang-, mw-1000mw-2000mw-COFDM-telemetriai-átviteli-vevő-készlet-2W-vezeték nélküli-digitális-audio-videó-adó-UAV-hoz.
– Kompakt méret, kis meleg, és hosszú átviteli tartomány
– kompatibilis egy kis kamerával, lehetővé teheti a HD kép rögzítését és továbbítását
– az átviteli tartomány nagyobb lesz, ha nagy erősítésű antennát használ
– Átviteli tartomány: 5000m (minden megszakítás nélkül)/500M akadályokkal megszakad
Jellemzők:
– Kompakt méret, modulációs tervezés
– COFDM modulációs technológiát alkalmaz, MPEG-2 képtömörítési technológia
– Mindenirányú kommunikáció
– a nagy sebességű kommunikáció valós idejű hang- és képátvitelt tesz lehetővé
– Ütésálló alumínium tok
– NLOS átvitel
Műszaki adatok:
Adó:
– Méret:90x64x23mm
– súly:200g
– antenna:22mm
Receiver
– méret: 87x70x20mm
– súly:200g
– Antenna magassága:42.5cm (hajlítható)
Műszaki specifikáció
– Moduláció: COFDM
– üzemi feszültség: DC11V-DC13V
– Munka jelenlegi:0.5W: kevesebb, mint 0,6A @ DC12V
– vezérlő port: standrad RS232 port. 8-bit adatbitek, 1-bit stop bit, Átviteli sebesség:19200, támogassa a páratlan paritásellenőrzést
– adatátviteli port:8 bit adatbitek,1 bit stop bit, Átviteli sebesség,1200,2400,4800,9600,19200,38400,57600,115200,230400
– Encryption: támogatás 128 Titkosítás
– moduláció térképezés: QPSK (4QAM),16QAM,64QQAM
– Előre hibajavítás: 1/2,2/3,3/4,5/6,7/8
– Védje az intervallumot: 1/32,1/16,1/8,1/4
– Fuvarozó száma:2K
– Frekvencia sávszélesség:2/3/4/5/6/7/8M állítható
– szállítási folyam:2000kbs-20000kbs állítható
– átviteli teljesítmény: 2W
– átviteli frekvencia: testreszabható, lépés 1Mhz
– teljesítmény laposság: kevesebb, mint 0,2 dB 10Mhz-en belül
– második harmonikus: kevesebb, mint -45db
– TÖBB:32db
– bemeneti videó:1Vp-p,75ohm
– Video program formátum: MPEG-2
– Videó minőség: 720×576 ha 4M felett van
– Formátum: NTSC és PAL beállítható
A vevő műszaki leírása:
– Vevő frekvenciatartománya: 170-860Mhz, VHF és UHF
– Frekvencia sávszélesség: 2/3/4/5/6/7/8 Mhz, állítható
– RF bemeneti szint:-94DBM-0dbm 8M / -98dbm-nél-0dbm 2M-nél
– RF bemeneti impedancia: 50ohm
– RF bemeneti port: középiskola
– moduláció: COFDM
– A csillagkép módja: QPSK,16QAM,64QAM opcionális
– Előre hibajavítás: 1/2,2/3,3/4,5/6,7/8 választható
– Fuvarozó száma:2K
– Védelmi rés:1/32,1/16,1/8,1/4
– Képernyősebesség:4:3,16:9
– videó kép:720×576 @ 6Mhz
– Audio és video kimeneti port: alapértelmezett 3.5 kikötő
– üzemi feszültség: DC12V 0,3A
Csomag tartalma:
– 1 x adó
– 1 x vevő
– 1 x tartozék készlet
30Km long distance COFDM HDMI Wireless Video Transmitter
GYIK
Kérdés 1: Legalább 30 km távolságra van szükségem a levegőtől a földig az UAV UGV USV-hez.
Válasz 1:Rendszerünk támogatja, 2W-os erősítőt kell használnia, célszerű a speciális hosszú adóantennát és két magasabb vevőantennát használni.
COFDM-912T VS COFDM-908T
Kérdés 2: Meddig jutok el, ha az adót és a vevőt is a földön használom?
Válasz: Földi használatra, az adónak és a vevőnek bizonyos magasságkülönbséggel kell rendelkeznie a nagy távolságok átviteléhez.
A leghosszabb távolság csak 2.5 kilométerre, ha az adó és a vevő egyazon magasságban van a talajon. Tekintse meg tesztvideónkat; mert az adó és a vevő különböző szinteken van elhelyezve, egyik oldala a hegynél van, másik oldala a tengerparton van, az alapértelmezett két wattot használtuk az átvitelre 27 kilométer.
Kérdés 3: Támogatja-e a munkakörnyezetet -20 fok?
Válasz: Igen, támogatott
Kérdés 4: I want to buy modules and built-in my devices, please tell me the dimension of that modules.
Válasz: SD model: 6X7X1.6cm, HD model: 5X7X1.6cm
Kérdés 5:Do you have any special case shells for marine use?
Válasz: Igen, Kérjük, ellenőrizze az alábbi képet. (For the transmitter with a three-proof shell, vízálló, ütésálló, anti-salt spray, 防水,防震,防盐雾)
Óvintézkedések a rendelés testreszabásához
- Frekvencia: Please tell me what frequency you need as the default center frequency. Please choose from 170-860Mhz.
- Antenna hossz: Please tell us the length you want for the 1-piece transmitter and 2-piece receiver antenna. (receiver antenna length has 0.8 vagy 1.8 meters optional)
- Antenna type:
According to your application scenario, the wireless video transmitter be placed on the drone or on the ground, or on the vehicle? Select different transmit antennas for transmitter and receiver antennas.
The transmitter of the UAV uses a short omnidirectional antenna as much as possible. The transmitter antenna installed on the ground or on the vehicle should be as long as possible, and it can be installed higher to avoid other obstacles on the ground. The receiver is generally used on the ground, try to choose a longer receiver antenna. If it is fixed in one place, a directional antenna can also be used. For more antenna types, please refer to https://ivcan.com/price-list-for-wireless-video-transmitter-and-receiver-antenna/.
GYIK
Q. What is the video resolution?
A: HDMI 1080P.
Q. Does the transmitter power current is high?
A: mert Adó, the different PA (erősítő) belül, the current is different. 20W 6-7A, 10W 5A, 5W 3A, 1-2W 1.6A
mert Receiver, the current is only 0.3A (300mA)
Q: Like we only need 10km, how much PA is recommended?
A: Considering that your transmitter and receiver are used on the ground, unlike drones, the heights of the transmitter and receiver are very different. It is recommended to use a 10W PA transmitter for 10 kilométer. You also need to consider that your receiver is installed on the car, and it keeps moving at high speed at any time. Only a high-power transmitter can ensure the signal stability at the receiver.
Q: What frequency is better? 2.4G or 5.8G?
A: The frequency range of Cofdm is 170~860Mhz.
We also have products that use 2.4G or 5.8G, but the range of these two intervals is the same as the frequency of WiFi, which will cause the transmission to be greatly interfered by WiFi, and the transmission distance will be greatly shortened.
If there are digital TV DVB-T signals locally, try to avoid frequencies in these ranges when selecting frequencies.
Q: Can customers adjust the frequency by themselves? If sometimes the frequency is occupied.
A: The default center frequency is 595Mhz, generally there is +/-15Mhz bandwidth, which is 30Mhz, and the frequency range can be adjusted. (580-610Mhz).
Beyond this range, it is necessary to change the antenna and PA customized according to this center frequency.
Q:How does the customer adjust the frequency of the transmitter or receiver? Is there any software to change the frequency?
A:It's very easy, the transmitter can use the assistant board next to the picture, and the receiver's assistant board is on the fuselage, with a screen and buttons.
But it is not recommended for customers to adjust, because sometimes he changed the parameters of the transmitter but did not change the parameters of the receiver, saying that he could not receive the signal.
Q: Can I adjust the power amplifier on the transmitter?
A: The user can reduce the actual output power by increasing the impedance of the high power, but cannot increase the transmitter of the low power PA.
Például, 10W PA can change to 5W PA, but can not change 5W PA to 10W.
- No one can tell you the exact transmission distance. Because the transmission distance depends on the height of your transceiver antenna and the type and thickness of obstacles, whether the transmitted signal can be diffracted, whether there is interference in the current frequency, stb..
- There are trees or a mountain in the middle, and the transmission distance is different.
- It is difficult to tell you an accurate transmission distance, even the walls have thickness, generally 500-1000 méter.
- Please watch our test video, if you think it is suitable, you can buy a sample for testing, if you are not satisfied, you can return it to us.
- Here is a form for COFDM PA and LOS and NLOS transmission distance for your references.
PA | AZ | NLOS |
500mW | >10Km | <300m |
1W | >30Km | <500m |
5W | >60Km | <1500m |
20W | >120km | <3000m |
50W | >200Km | <5000m |
100W | >250Km | <10Km |
Now COFDM-908T supports H.264, not H265.
Max support 1080 50P. We have actually tested that at 1080P60, the frame will be stuck, or the recognition will be incomplete
- Power consumption is equal to current times voltage. Például, for a 10W transmitter, the current is 5.5A, and the voltage is 12V, so its power consumption is 66W.
- If you prepare a 1000W rechargeable battery and use a 10W PA transmitter, it is estimated that you can use 1000W divided by 66W, which is equal to 15 órák.
-
Whether the link between the transmitter and receiver is good or the signal strength can be seen on the small screen at the COFDM receiver.
-
Not on the transmitter. Mivel a COFDM egyirányú átvitel, only the receiver can receive the signal strength of the transmission and show them on the screen. If the transmitter needs to see these signals, it is necessary to add a set of data transmission devices to transfer the status signal from the receiver to the transmitter and display them by the signal light.
-
The transmitter and receiver of two-way transmission can have this function, and it is recommended to choose a bidirectional transmission device.
- First of all the frequency is correct.
- In order to achieve the best performance of the transmitter, power amplifier and antenna, they are generally customized according to a central operating frequency point, and they can all work within a working frequency range, generally ±15Mhz. That is to say, when the central operating frequency is 290Mhz, the working range of the transmitter is 275Mhz~305Mhz. So it meets the frequency range of 280~300Mhz required by customers.
- Igen, the wireless video signal reception is improved by using Yagi and omni-directional antennas.
- Igen, we can build the transmission of telemetry and video in COFDM-908T.
- Első, the 10-watt RF linear amplifier and the 20-watt RF linear amplifier use the same cavity, which is machined by a CNC mill.
- CNC milling machines are not only expensive but also take a long time to process. The 20W and 10W cavities are universal, so they can be used with each other. For faster delivery, this character was not changed and used directly.
- This product actually has 20 watt. We used special instruments to test it before shipment. Please see the video below. (The instrument shows 3.04dBm plus the black attenuator 40dBm equals 43.04dBm)
- Test video at youtube: https://www.youtube.com/shorts/jfNoZeb1BIA
- Íme néhány megfelelés a kimeneti teljesítmény és a műszer által megjelenített dBm paraméterek között.
- 20mW 13dBm
200mW 23 dBm
1 A watt 30 dBm
2 A watt 33 dBm
5 A watt 37 dBm
10 A watt 40 dBm
20 A watt 43 dBm
50 A watt 47 dBm
100 A watt 50 dBm
Normal Four HDMI Video input and One HDMI output box
If it is just a simple splicing of four camera videos into one video, you can add a box with four HDMI inputs and one HDMI output in front of the transmitter. This means that the monitor on the receiver will always display each video on a quarter of the screen.
Igen, our dual antenna RF input receiver supports diversity. You can use two yagi directional antenna on our cofdm wireless video receiver.
For better signal reception, it is recommended to have one Yagi directional antenna and one omnidirectional antenna installed on the receiver.
It can be used by photographers. Currently supports 1080@60P, 1080@50P, 1080@30P
jelenleg, it does not support 1080i, nor does it support 4K transmission.
20km tenger felett HDMI vezeték nélküli videó adó és vevő teszt hajóhoz vagy parttól hajóig
Long-range 20 Watts Power Amplifier Transmitter and Receiver needs a 12V 6A power supply
Felhasználói Útmutató
Súly | 5 kg |
---|
Vélemények
Nincs még értékelés.