COFDM Video Transmitter
COFDM Video
Three in one image data control
H265/H264 video compression
Adaptive retransmission
frequency hopping
2.4GHz&5.8GHz dual frequency image transmission
Compact layout 65 × 43mm, weighing only 14g, can be integrated into remote control, ground station, or added to form a module with an outer shell
The Sprintlink DUO can automatically switch to the 5.8GHz frequency band, providing strong support for reliability through automatic switching, retransmission, and fast connection.
The implementation of an adaptive retransmission mechanism at the bottom layer not only greatly outperforms the retransmission mechanism at the application layer in terms of efficiency and latency, but also greatly improves the performance and user experience of the link in interference environments.
The module continuously detects the interference status of all available channels in real-time, and automatically selects and switches to the channel with the lowest interference in the current working channel, ensuring continuous and reliable communication.
OEM integration
tej thaj chaw deb tswj, module, ground station
transmission distance
10K
Software Defined Radio (SDR)
The modifiability of communication underlying protocols endows the system with the ability to continuously evolve and optimize;
Improve sufficient and effective verification for chip based technology, greatly reducing the risk of chip casting;
Flexible customization to enhance design win capabilities
Orthogonal Frequency Division Multiplexing (OFDM)
Effectively eliminating multipath interference in long-distance transmission
Low Density Parity Check Code (LDPC)
The independently optimized QC-LDPC design endows the system with excellent error correction performance, greatly improving reception performance.
Private communication protocol
Optimized design for video transmission, optimized frame format and pilot greatly improve the reception performance of video transmission.
Product parameters
| loj | 65mm×43mm |
| two × IPEX antenna connected to machine | Used for communication with peer modules |
| 1 x FPC connector | Used for data communication with the host |
| 4 x indicator lights | Used to indicate device status |
| interface | |
| 1 x Ethernet interface | Used for video or data communication |
| 1 x serial port | For data communication, 3.3/5.0 TTL theem |
| 1 x serial port | Used for module configuration and status acquisition, 3.3/5.0 TTL theem |
| 1 x SBUS | Remote control interface |
| 1 x PPM | Remote control interface |
| 1 x GPIO | Used for key triggered binding |
| muaj nuj nqi | |
| Ua hauj lwm zaus band | 2.4GHz/5.8GHz ISM |
| bandwidth | 20MHz/10MHz |
| Maximum kis tau tus mob hwj chim | 25dBm@2.4GHz 23dBm@5.8GHz |
| DC Voltage | 6~15V |
| noj | 5W |
| lag luam kub | -20 degrees rau 50 degrees |
| Ze | 20km@2.4GHz 5km@5.8GHz |
| kev cuam tshuam txog kev cuam tshuam | Supports retransmission, adaptive frequency hopping, and fast link functions |