Re-Write program new update firmware to the chipset for DVB-T2 or ISDB-T digital tv box step by step

Re-Write program new update firmware, me yasa?

When do you need to Re-Write the program on your tv box?

If you upgrade the wrong firmware or your tv box programmable chipset has lost the firmware, kana buƙatar sake rubuta firmware zuwa akwatin tv ɗinka daga kwamfutar. Da fatan za a duba aikin a cikin bidiyon da ke ƙasa.

A computer or tv box can upgrade with new firmware as it has the original firmware inside. If the device has lost or installed the wrong firmware, it can not upgrade to new firmware again. Except that the device’s engineer can offer you the new firmware but load it from the USB stick. Just like your computer os has been lost or a hard disk has been formatted, you can use a USB with the operating system to load and re-write a new firmware to the device. The below operation is similar to operation, from the computer instead of using a USB stick with the operating system.

Re-Write software to your tv box video guide.

Re-Write new firmware to your tv box steps.

Wani lokaci, if you upgrade the wrong firmware to the tv box or the program chipset loses the firmware, dole ne ku sake rubuta sabon shirin haɓakawa zuwa akwatin tv ɗin ku. This video shows the rewrite operation via the chipset programmer step by step.

• Mataki 1, Shirya mai shirye-shiryen chipset, Akwatin TV, da alkalami multimeter.
• Mataki 2, Connect the chipset programmer to the computer and power it. Lokacin da mai shirya shirye-shiryen chipset ya haskaka shuɗi, yana nufin mai shirye-shiryen chipset ya shirya.
• Mataki 3, A kwamfutar, buɗe kayan aikin ƙona mai shirye-shiryen chipset.
• Mataki 4, Danna tsarin na'urar sadarwa don nemo na'urar.
• Mataki 5, Danna kan samfurin MCU, samfurin anan yakamata ya zama iri ɗaya da ƙirar MCU akan allon akwatin TV.
• Mataki 6, Load da software. kuma danna download.
• Mataki 7: Kashe mai shirya shirye-shiryen chipset kuma kunna shi kuma.
• Mataki 8, Haɗa wayar daga mai shirye-shiryen chipset zuwa allon talbijin. Madaidaicin fil na waya yana daidaitawa tare da ƙasa.
• Mataki 9, Kunna wutar lantarki ta DC kuma daidaita wutar lantarki tsakanin 3.3 ~ 4.5V.
• Mataki 10, Haɗa sandar mara kyau (baki) na DC ƙarfin lantarki zuwa ƙasa da kuma tabbatacce iyakacin duniya (ja) zuwa madaidaicin sandar wutar lantarki.
• Mataki 11, Latsa farar maɓalli a kan mai shirye-shiryen chipset. Mai shirya shirye-shiryen chipset yana haskaka shuɗi kuma ya ji a “ƙara”, wanda ke nufin haɓakawa ya cika.

ƙwararren mutum ne ya gudanar da ayyukan. Ko neman taimako daga mai siyar da akwatin talbijin ku. Thanks for watching the video about the Re-Write program’s new updated firmware.

If you have any questions about the above operation, don Allah tuntube mu.

For more details, please also visit isdb-t.com